PJRAS1X2S02 Equivalent & Substitute Parts

Part Overview

The PJRAS1X2S02 is a right-angle RCA jack mono connector manufactured by Switchcraft Inc., designed for audio and signal applications requiring a 3.20mm ID, 9.00mm OD phono jack interface. This connector features solder termination, shielding, and a grounding tab for reliable signal transmission. The part is actively stocked with 1016 units available as new original inventory. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility within the PJR series.

Substiute Parts

PJRAS1X2S02

Switchcraft Inc.In Stock: 1099PJRAS1X2S02 Datasheet

Current PartRFQ

PJRAS1X2S02X

Switchcraft Inc.In Stock: 2308PJRAS1X2S02X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PJRAS1X2S02 is determined by strict adherence to the following electrical and mechanical parameters:

• Connector type must be Phono (RCA) Jack, female gender
• Signal configuration must be mono with 3 contacts (2 sets of 2 conductors)
• Mating diameter specification must match 3.20mm ID, 9.00mm OD (RCA standard)
• Mounting configuration must be through hole, right angle orientation
• Termination method must be solder
• Shielding must be present
• Operating temperature range must encompass -25°C ~ 85°C minimum
• Voltage rating must be 34VAC/DC or higher
• Current rating must be 2 A or higher
• Contact plating and body materials must be compatible (tin plating, copper alloy body)
• Housing material must be ABS
• Part must belong to the PJR series

The PJRAS1X2S02X qualifies as a direct substitute based on identical compliance with all specified parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the PJRAS1X2S02 and PJRAS1X2S02X are active products manufactured by Switchcraft Inc. and maintain full compliance with ROHS3 and REACH regulations. Selection between these parts should be based on packaging and inventory availability:

• PJRAS1X2S02 is available in standard packaging with 1016 units in stock
• PJRAS1X2S02X is available in bulk packaging with 2218 units in stock

Both parts carry identical electrical ratings, mechanical specifications, and environmental compliance certifications. The choice between them does not affect circuit performance or reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can PJRAS1X2S02X be used as a direct replacement for PJRAS1X2S02?

A: Yes. Both parts are electrically and mechanically identical. The primary difference is packaging format (standard versus bulk). All electrical parameters, mechanical dimensions, and compliance certifications are equivalent.

Q: What determines compatibility between these RCA jack connectors?

A: Compatibility is determined by matching the connector type (Phono RCA Jack), gender (Female), signal configuration (Mono), mating diameter (3.20mm ID, 9.00mm OD), contact count (3 contacts), mounting style (Through Hole, Right Angle), termination method (Solder), and shielding presence. All these parameters are identical between the main part and substitute.

Q: Are there any temperature or voltage derating considerations?

A: Both parts operate within -25°C ~ 85°C and are rated for 34VAC/DC at 2 A. No derating is required within these specified ranges.

Q: What is the significance of the packaging difference?

A: PJRAS1X2S02 uses standard packaging suitable for smaller order quantities, while PJRAS1X2S02X uses bulk packaging for higher-volume applications. The connector itself is functionally identical.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both PJRAS1X2S02 and PJRAS1X2S02X are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.