PIC16F785T-E/SS Equivalent & Substitute Parts

Part Overview

The PIC16F785T-E/SS is an 8-bit microcontroller from Microchip Technology's PIC® 16F series, designed for embedded applications requiring compact flash memory and integrated analog functionality. This device features 4.6KB of FLASH program memory, 128 bytes of RAM, and 256 bytes of EEPROM, operating across a wide supply voltage range of 2V to 5.5V. The part is currently in active production status and is ROHS3 compliant. Identifying equivalent substitute parts is necessary when the primary packaging format (Tape & Reel) is unavailable or when alternative sourcing is required to maintain supply chain continuity.

Substiute Parts

PIC16F785T-E/SS

Microchip TechnologyIn Stock: 9871PIC16F785T-E/SS Datasheet

Current PartRFQ

PIC16F785-E/SS

Microchip TechnologyIn Stock: 2170PIC16F785-E/SS Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PIC16F785T-E/SS is determined by strict equivalence across all electrical and mechanical parameters. The substitute part must maintain identical specifications for core processor architecture, memory configuration, I/O count, voltage supply range, operating temperature range, and package form factor. The primary differentiator between the main part and its substitute is the packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute part is supplied in Tube packaging. Both parts share the same base product number (PIC16F785), manufacturer (Microchip Technology), and all functional electrical characteristics. Substitution is valid when packaging format flexibility is acceptable for the application.

Parameter Comparison

Engineering Selection Recommendations

Both the PIC16F785T-E/SS and PIC16F785-E/SS are active production parts from Microchip Technology with identical electrical specifications and functional capabilities. Selection between these parts should be based on packaging and supply chain requirements. The Tape & Reel format of the main part is optimized for high-volume automated assembly processes, while the Tube packaging of the substitute part is suitable for lower-volume applications or manual assembly workflows. Both parts maintain ROHS3 compliance and carry unlimited moisture sensitivity classification (MSL 1), indicating no special storage or handling requirements. The choice between these parts does not impact circuit design, firmware compatibility, or functional performance.

Frequently Asked Questions (FAQ)

Q: Are the PIC16F785T-E/SS and PIC16F785-E/SS electrically identical?

A: Yes. Both parts share identical electrical specifications, including processor architecture, memory configuration, I/O count, voltage supply range, operating temperature range, and peripheral functionality. The only difference is the packaging format.

Q: What is the difference between Tape & Reel and Tube packaging?

A: Tape & Reel packaging supplies components on a continuous carrier tape wound on a reel, optimized for automated pick-and-place assembly. Tube packaging supplies components in a plastic tube, typically used for lower-volume or manual assembly applications. Both formats contain the same component.

Q: Can I substitute PIC16F785-E/SS for PIC16F785T-E/SS in my design?

A: Yes, provided your assembly process can accommodate Tube packaging instead of Tape & Reel. No circuit design or firmware changes are required.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS3 compliance status, REACH status, and moisture sensitivity classification. Regulatory and environmental compliance is equivalent.

Q: Which part should I select for high-volume production?

A: The PIC16F785T-E/SS in Tape & Reel format is the standard choice for high-volume automated assembly. The PIC16F785-E/SS in Tube format is suitable when Tape & Reel availability is constrained or when assembly volume does not justify reel-based logistics.