PIC10F220T-I/MC Equivalent & Substitute Parts

Part Overview

The PIC10F220T-I/MC is an 8-bit microcontroller from Microchip Technology's PIC® 10F series, designed for embedded applications requiring minimal footprint and low power consumption. This device features 384B of FLASH program memory, 16x8 bytes of RAM, and operates at 8MHz with a supply voltage range of 2V to 5.5V. The component is mounted in an 8-DFN (2x3) package and is currently in active production status. Identifying equivalent and substitute parts is essential for supply chain continuity, design flexibility, and procurement optimization when the primary part number becomes unavailable or when alternative packaging formats are required.

Substiute Parts

PIC10F220T-I/MC

Microchip TechnologyIn Stock: 741PIC10F220T-I/MC Datasheet

Current PartRFQ

PIC10F220-I/MC

Microchip TechnologyIn Stock: 1946PIC10F220-I/MC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PIC10F220T-I/MC is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications in the following key areas:

Microcontroller core architecture and instruction set compatibility (PIC® 10F series, 8-bit core) Program memory capacity and type (384B FLASH, 256 x 12 organization) RAM capacity (16 x 8 bytes) Operating frequency (8MHz) Supply voltage range (2V ~ 5.5V) Peripheral configuration (POR, WDT) I/O pin count (4 pins) Data converter specifications (A/D 2x8b) Operating temperature range (-40°C ~ 85°C) Package type (8-VFDFN Exposed Pad) Compliance certifications (ROHS3, REACH Unaffected)

The primary distinction between the main part and its substitute lies in the packaging format: the main part is supplied in Tape & Reel (TR) format, while the substitute is supplied in Tube format. Both formats contain identical die and electrical specifications, with the difference being only in the delivery and handling method.

Parameter Comparison

Engineering Selection Recommendations

Both the PIC10F220T-I/MC and PIC10F220-I/MC are active production devices from Microchip Technology with identical electrical and functional specifications. Selection between these parts should be based on procurement and assembly requirements:

The PIC10F220T-I/MC in Tape & Reel format is suitable for high-volume automated assembly operations where reel-fed component handling is standard.

The PIC10F220-I/MC in Tube format is suitable for lower-volume production, manual assembly, or applications where tube packaging is preferred for handling and storage.

Both parts maintain full ROHS3 compliance and REACH unaffected status, ensuring regulatory compliance across all markets. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity restrictions for either part.

Frequently Asked Questions (FAQ)

Q: Are PIC10F220T-I/MC and PIC10F220-I/MC electrically identical?

A: Yes. Both parts contain identical die, instruction set, memory configuration, and electrical specifications. The only difference is the packaging format used for delivery and handling.

Q: Can I substitute PIC10F220-I/MC (Tube) for PIC10F220T-I/MC (Tape & Reel) in my design?

A: Yes, provided your assembly process can accommodate tube-packaged components. The electrical and functional performance will be identical.

Q: What is the significance of the packaging format difference?

A: Tape & Reel format is optimized for automated pick-and-place assembly equipment. Tube format is used for manual handling or lower-volume assembly. The component itself is unchanged.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical ROHS3 compliance, REACH unaffected status, and MSL rating of 1 (Unlimited).

Q: Can I use either part interchangeably on the same PCB?

A: Yes. Both parts use the same 8-VFDFN Exposed Pad package with identical pinout, footprint, and electrical characteristics. PCB design and assembly procedures remain unchanged.

Q: What should I verify before switching between these part numbers?

A: Confirm that your assembly process and component handling equipment support the packaging format of the substitute part. No electrical or functional verification is required due to complete specification equivalence.