PI90LV01TEX Equivalent & Substitute Parts

Part Overview

The PI90LV01TEX is a 1/0 Driver LVDS interface IC manufactured by Diodes Incorporated in SOT-23-5 surface mount packaging. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing design support and production continuity. The PI90LV01TEX operates across a 3V to 3.6V supply voltage range with a maximum data rate of 660Mbps, serving as a low-voltage differential signaling driver for single-channel applications.

Substiute Parts

PI90LV01TEX

Diodes IncorporatedIn Stock: 17127PI90LV01TEX Datasheet

Current PartRFQ

PI90LV01ATEX

Diodes IncorporatedIn Stock: 3479PI90LV01ATEX Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PI90LV01TEX is determined by strict equivalence across the following critical parameters:

• Protocol and Function: LVDS driver with 1/0 configuration (single driver, no receiver)
• Electrical Performance: 660Mbps data rate capability
• Supply Voltage Range: 3V to 3.6V operation
• Temperature Range: -40°C to 105°C operating specification
• Physical Package: SOT-23-5 surface mount package (SC-74A, SOT-753)
• Compliance Standards: ROHS3 compliance and REACH unaffected status
• Manufacturer: Diodes Incorporated

The PI90LV01ATEX meets all substitution criteria as a manufacturer-recommended equivalent, with identical electrical specifications and packaging while offering active product status.

Parameter Comparison

Engineering Selection Recommendations

The PI90LV01ATEX is the direct substitute for the PI90LV01TEX. Both components are manufactured by Diodes Incorporated and maintain identical electrical and mechanical specifications across all critical parameters. The primary distinction is product status: the PI90LV01TEX is obsolete while the PI90LV01ATEX carries active status, ensuring continued availability and manufacturing support.

Both parts satisfy ROHS3 compliance requirements and REACH regulatory status. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints for either component. Selection of the PI90LV01ATEX provides design continuity with the added benefit of active product lifecycle support from the manufacturer.

Frequently Asked Questions (FAQ)

Q: Can the PI90LV01ATEX directly replace the PI90LV01TEX in existing designs?

A: Yes. The PI90LV01ATEX is electrically and mechanically equivalent to the PI90LV01TEX. Both components share identical pin configurations, package dimensions (SOT-23-5), supply voltage requirements (3V to 3.6V), data rate specifications (660Mbps), and operating temperature ranges (-40°C to 105°C). No circuit modifications are required.

Q: What is the difference between these two part numbers?

A: The PI90LV01ATEX is the active production variant of the PI90LV01TEX. The primary difference is product lifecycle status: PI90LV01TEX is obsolete, while PI90LV01ATEX is actively manufactured and supported by Diodes Incorporated. Electrical and physical specifications are identical.

Q: Are there packaging options available for the PI90LV01ATEX?

A: The PI90LV01ATEX is available in both Cut Tape (CT) and Digi-Reel® packaging formats, as well as Tape & Reel (TR) configuration. The PI90LV01TEX was supplied in Cut Tape packaging. Selection of packaging format depends on production volume and assembly requirements.

Q: Do both parts meet current regulatory compliance standards?

A: Yes. Both the PI90LV01TEX and PI90LV01ATEX are ROHS3 compliant and REACH unaffected. Both components carry MSL rating 1 (Unlimited), indicating no moisture sensitivity limitations for storage or handling.

Q: What is the data rate capability of these LVDS drivers?

A: Both components support a maximum data rate of 660Mbps for LVDS signaling applications. This specification applies to the single driver channel (1/0 configuration) in the SOT-23-5 package.