PI7C8150BMAIE Equivalent & Substitute Parts

Part Overview

The PI7C8150BMAIE is a PCI-to-PCI Bridge Interface IC manufactured by Diodes Incorporated, housed in a 208-FQFP (28x28) package. This component functions as a specialized interface for PCI-to-PCI bridging applications. The product is classified as Obsolete, making identification of functionally equivalent alternatives necessary for ongoing system support and new design implementations where legacy PCI bridging functionality is required.

Substiute Parts

PI7C8150BMAIE

Diodes IncorporatedIn Stock: 800PI7C8150BMAIE Datasheet

Current PartRFQ

89HP0508PZBABGI8

Renesas Electronics CorporationIn Stock: 110689HP0508PZBABGI8 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the PI7C8150BMAIE is based on the following critical parameters:

• Functional Category: Interface IC for specialized bridging applications
• Mounting Type: Surface Mount compatibility
• Regulatory Compliance: ROHS3 Compliant and EAR99 classification
• Moisture Sensitivity: MSL 3 rating
• Supply Voltage Range: Operating voltage compatibility within 3V ~ 3.6V or equivalent low-voltage specifications

The identified substitute, 89HP0508PZBABGI8 from Renesas Electronics Corporation, operates within the Interface category and maintains equivalent regulatory compliance standards. While package geometry differs (100-CABGA versus 208-FQFP), both components are surface-mount interface ICs designed for specialized signal bridging applications.

Parameter Comparison

Engineering Selection Recommendations

Selection between the PI7C8150BMAIE and 89HP0508PZBABGI8 should be based on the following factors:

Product Status Consideration: The PI7C8150BMAIE is Obsolete, while the 89HP0508PZBABGI8 is Active. For new designs or long-term production requirements, the Active status of the Renesas component provides supply chain continuity and manufacturer support.

Regulatory Compliance: Both components maintain ROHS3 compliance and EAR99 export classification. The 89HP0508PZBABGI8 carries REACH Unaffected status, whereas the PI7C8150BMAIE is REACH Affected. This distinction may influence procurement decisions in regions with strict REACH compliance requirements.

Package Geometry: The PI7C8150BMAIE uses a 208-FQFP (28x28) package, while the 89HP0508PZBABGI8 uses a 100-CABGA (9x9) package. PCB layout and footprint compatibility must be evaluated during design integration.

Moisture Sensitivity: Both components share identical MSL 3 (168 Hours) ratings, ensuring equivalent handling and storage requirements.

Frequently Asked Questions (FAQ)

Q: Can the 89HP0508PZBABGI8 directly replace the PI7C8150BMAIE on existing PCBs?

A: Direct PCB replacement is not possible due to different package geometries. The PI7C8150BMAIE uses a 208-FQFP (28x28) package, while the 89HP0508PZBABGI8 uses a 100-CABGA (9x9) package. PCB redesign and re-layout are required for substitution.

Q: What is the significance of the Obsolete status for the PI7C8150BMAIE?

A: Obsolete status indicates the manufacturer has discontinued production. The 89HP0508PZBABGI8, classified as Active, represents a current production alternative for applications requiring interface bridging functionality.

Q: Are there any compliance differences between these two parts?

A: Both components are ROHS3 compliant and carry EAR99 export classification. The primary compliance difference is REACH status: the PI7C8150BMAIE is REACH Affected, while the 89HP0508PZBABGI8 is REACH Unaffected. This may impact procurement in REACH-regulated regions.

Q: Do both components have the same moisture sensitivity requirements?

A: Yes. Both the PI7C8150BMAIE and 89HP0508PZBABGI8 are rated MSL 3 (168 Hours), requiring identical handling, storage, and reflow procedures.

Q: What supply voltage specifications apply to these interface ICs?

A: The PI7C8150BMAIE operates at 3V ~ 3.6V supply voltage. The 89HP0508PZBABGI8 supply voltage specification is not provided in the available parameters.