PI5C16210AE Bus Switch 10 x 1:1 Equivalent & Substitute Parts

Part Overview

The PI5C16210AE is a bus switch IC manufactured by Diodes Incorporated, designed for 10 x 1:1 switching applications in logic circuits. This component features a 48-TSSOP package and operates across a 4V to 5.5V supply range with an operating temperature range of -40°C to 85°C. The part is currently classified as obsolete, making identification of active equivalent and substitute parts essential for ongoing design support and production continuity.

Substiute Parts

PI5C16210AE

Diodes IncorporatedIn Stock: 1168PI5C16210AE Datasheet

Current PartRFQ

CBT16210DGG,112

NXP USA Inc.In Stock: 2113CBT16210DGG,112 Datasheet

MFR RecommendedRFQ

CBTD16210DGG,112

Nexperia USA Inc.In Stock: 925CBTD16210DGG,112 Datasheet

MFR RecommendedRFQ

SN74CBT16210CDGGR

Texas InstrumentsIn Stock: 4042SN74CBT16210CDGGR Datasheet

MFR RecommendedRFQ

SN74CBT16210CDGVR

Texas InstrumentsIn Stock: 773SN74CBT16210CDGVR Datasheet

MFR RecommendedRFQ

SN74CBT16210CDLR

Texas InstrumentsIn Stock: 2112SN74CBT16210CDLR Datasheet

MFR RecommendedRFQ

SN74CBT16210DGVR

Texas InstrumentsIn Stock: 6213SN74CBT16210DGVR Datasheet

MFR RecommendedRFQ

SN74CBT16210DL

Texas InstrumentsIn Stock: 658SN74CBT16210DL Datasheet

MFR RecommendedRFQ

SN74CBT16210DLR

Texas InstrumentsIn Stock: 717SN74CBT16210DLR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PI5C16210AE is determined by the following critical parameters:

• Circuit configuration: 10 x 1:1 topology with 2 independent circuits
• Voltage supply range: Single supply operation between 4V and 5.5V
• Operating temperature range: -40°C to 85°C
• Mounting type: Surface mount technology
• Package compatibility: 48-pin configurations (TSSOP, TVSOP, SSOP variants)
• Compliance standards: ROHS3 compliance, REACH unaffected status, and EAR99 classification

Active substitute parts from Texas Instruments, NXP USA Inc., and Nexperia USA Inc. maintain identical circuit functionality and electrical specifications. Package variants (48-TSSOP, 48-TVSOP, 48-SSOP) represent physical form factor differences while preserving electrical compatibility. Product status variations (Active, Last Time Buy) indicate availability and lifecycle stage but do not affect functional substitution.

Parameter Comparison

Engineering Selection Recommendations

For designs currently using the PI5C16210AE, the following active substitute parts are recommended based on product lifecycle status and compliance certifications:

Primary Recommendations (Active Status):

CBT16210DGG,112 from NXP USA Inc. and CBTD16210DGG,112 from Nexperia USA Inc. are both classified as active products with full availability. Both maintain identical electrical specifications and 48-TFSOP packaging, providing direct form-factor compatibility with the original PI5C16210AE design.

SN74CBT16210CDGGR from Texas Instruments is an active product available in Tape & Reel packaging with 48-TFSOP configuration, offering the same electrical performance and compliance profile.

Secondary Recommendations (Last Time Buy Status):

SN74CBT16210DGVR, SN74CBT16210DL, and SN74CBT16210DLR from Texas Instruments are classified as Last Time Buy, indicating limited future availability. These parts maintain full electrical and thermal compatibility but feature alternative package configurations (48-TVSOP and 48-SSOP variants). Selection of these parts requires PCB layout modifications to accommodate different package dimensions.

All substitute parts maintain ROHS3 compliance, REACH unaffected status, and EAR99 classification, ensuring regulatory alignment with the original component.

Frequently Asked Questions (FAQ)

Q: Can I use SN74CBT16210CDGVR as a direct replacement for PI5C16210AE without PCB modifications?

A: No. While SN74CBT16210CDGVR maintains identical electrical specifications and operating parameters, it uses a 48-TVSOP package (0.173" width) compared to the PI5C16210AE's 48-TFSOP package (0.240" width). PCB footprint modifications are required.

Q: What is the difference between 48-TSSOP, 48-TVSOP, and 48-SSOP packages?

A: These designations refer to different physical form factors for 48-pin surface-mount packages. TSSOP (Thin Shrink Small Outline Package) at 0.240" width is the original PI5C16210AE configuration. TVSOP (Thin Very Small Outline Package) at 0.173" width is narrower. SSOP (Shrink Small Outline Package) at 0.295" width is wider. All three are electrically compatible but require different PCB footprints.

Q: Why does the PI5C16210AE have a 4V minimum supply voltage while most substitutes specify 4.5V?

A: The PI5C16210AE supports operation down to 4V, while active substitute parts from NXP, Nexperia, and Texas Instruments specify a 4.5V minimum. If your design operates below 4.5V, the PI5C16210AE cannot be substituted with these active alternatives.

Q: Are Last Time Buy parts suitable for new production designs?

A: Last Time Buy status indicates limited future availability. For new production designs, active status parts (CBT16210DGG,112, CBTD16210DGG,112, or SN74CBT16210CDGGR) are recommended to ensure long-term supply chain stability.

Q: Do all substitute parts have the same moisture sensitivity level?

A: Yes. All substitute parts listed maintain MSL 1 (Unlimited) rating, identical to the PI5C16210AE, indicating no moisture sensitivity constraints during storage and handling.

Q: Which substitute part offers the best availability?

A: SN74CBT16210CDGGR from Texas Instruments shows the highest inventory level (3936 pcs) among active products, followed by SN74CBT16210DGVR (6135 pcs) in Last Time Buy status. CBT16210DGG,112 from NXP (2010 pcs) and CBTD16210DGG,112 from Nexperia (896 pcs) are also available in active status.