PI3V712-AZLE Equivalent & Substitute Parts

Part Overview

The PI3V712-AZLE is a video switch IC manufactured by Diodes Incorporated, designed for multiplexing and demultiplexing applications in video signal routing. This 7-channel VGA interface component operates at 3.3V supply voltage with a 1GHz bandwidth and RGB feature support. The product is classified as obsolete, making identification of compatible substitute components essential for ongoing system support and new design implementations.

Substiute Parts

PI3V712-AZLE

Diodes IncorporatedIn Stock: 17262PI3V712-AZLE Datasheet

Current PartRFQ

NX5DV715HF,118

NXP USA Inc.In Stock: 5805NX5DV715HF,118 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PI3V712-AZLE is determined by the following critical parameters:

• Package Compatibility: Both main and substitute parts must use the 32-WFQFN Exposed Pad package in 3x6 form factor to ensure PCB footprint compatibility
• Interface Category: Substitute parts must function as video switch or multiplexer/demultiplexer interface components
• Supply Voltage Range: The substitute must operate within or encompass the 3.3V supply requirement
• Bandwidth Performance: Minimum -3dB bandwidth of 600MHz or higher supports video signal integrity
• On-State Resistance: Maximum on-state resistance of 4Ohm or lower maintains signal quality
• RGB Feature Support: Video switch functionality with RGB signal handling capability
• Compliance Standards: RoHS3 compliance and MSL Level 1 rating required for manufacturing and storage compatibility

The NX5DV715HF,118 from NXP USA Inc. meets these substitution criteria despite differences in channel count and specific bandwidth specifications.

Parameter Comparison

Engineering Selection Recommendations

The NX5DV715HF,118 serves as a functional substitute for the PI3V712-AZLE based on the following engineering criteria:

Package Compatibility: Both components utilize the 32-WFQFN Exposed Pad package in 3x6 dimensions, ensuring direct PCB footprint compatibility without layout modifications.

Compliance Alignment: Both parts maintain ROHS3 compliance and MSL Level 1 rating, satisfying manufacturing process requirements and storage condition standards.

Supply Voltage: The NX5DV715HF,118 operates across a 2V to 5.5V range, which encompasses the PI3V712-AZLE's 3.3V requirement, providing operational compatibility.

Signal Integrity: The substitute part's 600MHz bandwidth and 4Ohm on-state resistance remain within acceptable parameters for video signal routing applications, though at reduced performance margins compared to the original 1GHz specification.

Functional Capability: Both components provide RGB video switching functionality with multiplexer/demultiplexer circuit topology, supporting equivalent application requirements.

Product Status: Both components are classified as obsolete, indicating equivalent lifecycle status and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: Can the NX5DV715HF,118 directly replace the PI3V712-AZLE without PCB modifications?

A: Yes. Both components share identical 32-WFQFN Exposed Pad packaging in 3x6 form factor, enabling direct footprint compatibility. No PCB layout changes are required.

Q: What is the primary functional difference between these components?

A: The PI3V712-AZLE provides 7 channels with 1GHz bandwidth, while the NX5DV715HF,118 provides 2 channels with 600MHz bandwidth. Channel count and bandwidth performance differ, but both support RGB video switching applications.

Q: Are there supply voltage compatibility concerns?

A: No. The NX5DV715HF,118 operates across 2V to 5.5V, which includes the PI3V712-AZLE's 3.3V operating point. The substitute part functions correctly at the original component's supply voltage.

Q: Do both parts meet the same compliance standards?

A: Yes. Both components are ROHS3 compliant with MSL Level 1 rating, satisfying identical manufacturing and storage requirements.

Q: What performance trade-offs exist with this substitution?

A: The substitute part operates at 600MHz bandwidth versus the original 1GHz, and provides 2 channels instead of 7. On-state resistance increases from 3Ohm to 4Ohm. These differences may impact applications requiring maximum channel density or highest bandwidth performance.

Q: Are both components currently available?

A: Both parts are classified as obsolete. Availability through authorized distributors should be confirmed before design implementation.