Request Quote
(Ships tomorrow)
PI3B16211AE Equivalent & Substitute Parts
Part Overview
The PI3B16211AE is a 12 x 1:1 bus switch logic IC manufactured by Diodes Incorporated in a 56-TSSOP package. This component is classified as obsolete, which necessitates identification of active equivalent and substitute parts for ongoing design support and procurement. Bus switches of this configuration are used for signal routing and multiplexing applications requiring low-capacitance, high-speed switching characteristics. Active alternatives from major manufacturers ensure design continuity and supply chain reliability.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | PI3B16211AE |
| Manufacturer | Diodes Incorporated |
| Type | Bus Switch |
| Circuit Configuration | 12 x 1:1 |
| Independent Circuits | 2 |
| Voltage Supply Source | Single Supply |
| Voltage - Supply Range | 3V ~ 3.6V |
| Operating Temperature Range | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240", 6.10mm Width) |
| Supplier Device Package | 56-TSSOP |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Product Status | Obsolete |
Substitute Part Grouping Explanation
Substitution of the PI3B16211AE is determined by strict equivalence in the following parameters:
- Circuit Configuration: 12 x 1:1 topology with 2 independent circuits
- Voltage Supply Range: Substitute parts must operate within or encompass the 3V ~ 3.6V range
- Operating Temperature: -40°C ~ 85°C operational window
- Mounting Type: Surface mount only
- Package Compatibility: 56-pin packages (56-TSSOP, 56-TFSOP, 56-TVSOP, 56-SSOP, 56-BSSOP)
- Compliance: ROHS3 compliant, MSL 1, REACH unaffected
Substitute parts are grouped by manufacturer and product status. All identified substitutes are active products from Texas Instruments and Renesas Electronics Corporation, ensuring long-term availability and technical support. Package variants (TSSOP, TFSOP, TVSOP, SSOP, BSSOP) are functionally equivalent but differ in physical dimensions and tape/reel configurations.
Parameter Comparison
| Part Number | Manufacturer | Circuit | Voltage Supply (V) | Temp Range (°C) | Package Type | Product Status | Inventory (Pcs) |
|---|---|---|---|---|---|---|---|
| PI3B16211AE | Diodes Incorporated | 12 x 1:1 | 3.0 ~ 3.6 | -40 ~ 85 | 56-TFSOP | Obsolete | 965 |
| QS3VH16211PAG | Renesas Electronics | 12 x 1:1 | 2.3 ~ 3.6 | -40 ~ 85 | 56-TFSOP | Active | 1196 |
| QS3VH16211PAG8 | Renesas Electronics | 12 x 1:1 | 2.3 ~ 3.6 | -40 ~ 85 | 56-TFSOP | Active | 3763 |
| SN74CB3Q16211DGGR | Texas Instruments | 12 x 1:1 | 2.3 ~ 3.6 | -40 ~ 85 | 56-TFSOP | Active | 6300 |
| SN74CB3Q16211DGVR | Texas Instruments | 12 x 1:1 | 2.3 ~ 3.6 | -40 ~ 85 | 56-TVSOP | Active | 1137 |
| SN74CB3Q16211DL | Texas Instruments | 12 x 1:1 | 2.3 ~ 3.6 | -40 ~ 85 | 56-BSSOP | Active | 1002 |
| SN74CB3Q16211DLR | Texas Instruments | 12 x 1:1 | 2.3 ~ 3.6 | -40 ~ 85 | 56-BSSOP | Active | 905 |
| SN74CBTLV16211DGG | Texas Instruments | 12 x 1:1 | 2.3 ~ 3.6 | -40 ~ 85 | 56-TFSOP | Active | 962 |
| SN74CBTLV16211DL | Texas Instruments | 12 x 1:1 | 2.3 ~ 3.6 | -40 ~ 85 | 56-BSSOP | Active | 999 |
| SN74CBTLV16211DLR | Texas Instruments | 12 x 1:1 | 2.3 ~ 3.6 | -40 ~ 85 | 56-BSSOP | Active | 2426 |
| SN74CBTLV16211GR | Texas Instruments | 12 x 1:1 | 2.3 ~ 3.6 | -40 ~ 85 | 56-TFSOP | Active | 5061 |
Engineering Selection Recommendations
All identified substitute parts maintain functional equivalence to the PI3B16211AE through identical circuit topology (12 x 1:1 configuration with 2 independent circuits), compatible operating temperature range (-40°C ~ 85°C), and surface mount packaging. All substitutes are active products with ROHS3 compliance and MSL 1 rating, ensuring regulatory compliance and handling consistency with the original part.
Renesas Electronics QS3VH Series: The QS3VH16211PAG and QS3VH16211PAG8 variants offer extended lower voltage operation (2.3V minimum versus 3V minimum), providing broader supply voltage compatibility. QS3VH16211PAG8 offers highest inventory availability (3763 units) in Cut Tape & Digi-Reel packaging.
Texas Instruments 74CB3Q Series: The SN74CB3Q16211DGGR provides the highest inventory level (6300 units) in 56-TFSOP package. SN74CB3Q16211DL and SN74CB3Q16211DLR variants are available in 56-BSSOP package for applications requiring different board layout footprints.
Texas Instruments 74CBTLV Series: The SN74CBTLV16211GR offers substantial inventory (5061 units) in 56-TFSOP package. SN74CBTLV16211DLR provides the second-highest inventory (2426 units) in 56-BSSOP configuration.
Package selection (TFSOP, TVSOP, BSSOP, SSOP) depends on PCB layout requirements and assembly equipment compatibility. All variants maintain electrical equivalence within the specified parameters.
Frequently Asked Questions (FAQ)
Q: Can I directly replace PI3B16211AE with any of the listed substitutes?
A: Yes, all listed substitutes are electrically and functionally equivalent within the specified parameters. However, package type selection depends on your PCB footprint design. Verify that your assembly equipment supports the chosen package variant (56-TFSOP, 56-TVSOP, 56-BSSOP, or 56-SSOP).
Q: What is the difference between 56-TFSOP and 56-BSSOP packages?
A: Both are 56-pin surface mount packages but differ in physical dimensions. 56-TFSOP has a width of 0.240" (6.10mm), while 56-BSSOP has a width of 0.295" (7.50mm). PCB footprint and assembly tooling must match the selected package type.
Q: Why do some substitutes have lower minimum voltage (2.3V vs 3V)?
A: Renesas QS3VH and Texas Instruments 74CB3Q/74CBTLV series support extended voltage ranges. If your design operates at 3V ~ 3.6V, both the original PI3B16211AE specification and the broader 2.3V ~ 3.6V substitutes are compatible. The extended range provides additional design flexibility for future applications.
Q: Are all substitutes ROHS3 compliant?
A: Yes, all identified substitutes maintain ROHS3 compliance and MSL 1 rating, matching the original part's regulatory and handling requirements.
Q: What packaging options are available for high-volume procurement?
A: Tape & Reel (TR) options are available from Texas Instruments (SN74CB3Q16211DGVR, SN74CB3Q16211DLR, SN74CBTLV16211DLR) and Renesas Electronics (QS3VH16211PAG8). Cut Tape & Digi-Reel options are available from Texas Instruments (SN74CBTLV16211GR) and Renesas Electronics (QS3VH16211PAG8).
Q: Which substitute offers the best inventory availability?
A: SN74CB3Q16211DGGR from Texas Instruments provides the highest inventory level at 6300 units, followed by SN74CBTLV16211GR at 5061 units and QS3VH16211PAG8 at 3763 units.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts




