PHG.1K.306.CLLC55Z Equivalent & Substitute Parts

Part Overview

The PHG.1K.306.CLLC55Z is a 6-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This connector is designed for applications requiring push-pull fastening, shielded construction, and IP66/IP68 ingress protection. The part is currently active in production with 868 units in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component substitution within specified electrical and mechanical parameters.

Substiute Parts

PHG.1K.306.CLLC55Z

LEMOIn Stock: 878PHG.1K.306.CLLC55Z Datasheet

Current PartRFQ

K21K0C-P06LFG0-550S

ODUIn Stock: 700K21K0C-P06LFG0-550S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PHG.1K.306.CLLC55Z are identified based on the following critical parameters that determine functional equivalence:

• Connector Configuration: 6-position receptacle with female sockets
• Termination Method: Solder cup for direct PCB or cable attachment
• Fastening Mechanism: Push-pull coupling system
• Electrical Performance: Current rating of 7A or greater
• Environmental Protection: IP68 waterproof rating (meets or exceeds IP66/IP68 requirement)
• Material Compatibility: Brass shell with gold-plated mating contacts and PEEK insert
• Regulatory Compliance: ROHS3 compliant status

The ODU K21K0C-P06LFG0-550S meets these core substitution criteria as a 6-position circular connector receptacle with female sockets, solder cup termination, push-pull fastening, shielded construction, and ROHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

Both the PHG.1K.306.CLLC55Z and K21K0C-P06LFG0-550S are active production parts with ROHS3 compliance and REACH unaffected status. The ODU substitute provides equivalent electrical performance with a higher current rating (7.5A versus 7A) and meets IP68 waterproof specifications.

Selection between these parts should account for the operating temperature range differential: the LEMO part supports -55°C to 200°C operation, while the ODU part operates within -40°C to 120°C. Applications requiring extended low-temperature operation below -40°C or sustained high-temperature operation above 120°C necessitate the LEMO PHG.1K.306.CLLC55Z. For standard industrial and commercial applications within the ODU temperature range, the K21K0C-P06LFG0-550S provides functional equivalence with additional current capacity margin.

Frequently Asked Questions (FAQ)

Q: Can the K21K0C-P06LFG0-550S directly replace the PHG.1K.306.CLLC55Z in all applications?

A: Direct replacement is possible for applications operating within -40°C to 120°C. Applications requiring operation below -40°C or above 120°C require the LEMO part to maintain specified performance.

Q: What are the key compatibility factors for these connectors?

A: Both connectors share identical 6-position configuration, female socket receptacle design, solder cup termination, push-pull fastening, and PEEK insert material. Cable opening ranges overlap within 5.10mm to 5.50mm, ensuring mechanical compatibility for standard cable gauges.

Q: How do the current ratings differ between these parts?

A: The LEMO PHG.1K.306.CLLC55Z is rated for 7A, while the ODU K21K0C-P06LFG0-550S is rated for 7.5A. The ODU part provides 7% additional current capacity. Circuit designs operating at or near the 7A limit should account for this differential when selecting the substitute.

Q: Are both parts compliant with current regulatory standards?

A: Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

Q: What packaging differences exist between these parts?

A: The LEMO part is supplied in standard packaging, while the ODU part is supplied in bulk packaging. Procurement quantities and handling procedures may differ accordingly.