PHG.0K.307.CLLC35 Equivalent & Substitute Parts

Part Overview

The PHG.0K.307.CLLC35 is a 7-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This connector is designed for applications requiring push-pull fastening, shielded construction, and waterproof ingress protection. The part is currently active in production with 708 units in stock. Equivalent and substitute parts are identified to provide procurement flexibility, inventory alternatives, and supply chain continuity for this connector category.

Substiute Parts

PHG.0K.307.CLLC35

LEMOIn Stock: 718PHG.0K.307.CLLC35 Datasheet

Current PartRFQ

K10K0C-P07LCC0-3500

ODUIn Stock: 854K10K0C-P07LCC0-3500 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PHG.0K.307.CLLC35 is determined by the following critical parameters:

• Connector Type & Position Count: Receptacle configuration with 7 female sockets
• Termination Method: Solder cup termination for PCB integration
• Fastening Mechanism: Push-pull coupling system
• Shell & Contact Materials: Brass shell with gold-plated mating contacts
• Ingress Protection: IP66/IP68 rating for sealed applications
• Insert Material: PEEK for mechanical stability and thermal performance
• Regulatory Compliance: ROHS3 and REACH compliance status

The substitute part K10K0C-P07LCC0-3500 (ODU MINI-SNAP® K series) meets these core substitution criteria while maintaining functional equivalence for circular connector receptacle applications.

Parameter Comparison

Engineering Selection Recommendations

Both the PHG.0K.307.CLLC35 and K10K0C-P07LCC0-3500 are active production parts with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial and commercial applications.

The LEMO PHG.0K.307.CLLC35 provides an extended operating temperature range (-55°C to 200°C) suitable for high-temperature environments. The ODU K10K0C-P07LCC0-3500 offers higher current capacity (4A versus 2.5A) with IP68 waterproof rating, making it suitable for submerged or high-moisture applications.

Selection between these parts should be based on specific application requirements regarding temperature extremes, current demands, and environmental exposure conditions. Both parts maintain equivalent mechanical and electrical interfaces for solder cup termination and push-pull coupling.

Frequently Asked Questions (FAQ)

Q: Can K10K0C-P07LCC0-3500 replace PHG.0K.307.CLLC35 in all applications?

A: Functional replacement is possible for applications within the operating temperature range of -40°C to 120°C. Applications requiring temperatures below -40°C or above 120°C require the LEMO part. Both parts maintain identical 7-position solder cup configuration and push-pull fastening.

Q: What are the differences in shell finish between these parts?

A: The LEMO part features chrome finish on brass shell. The ODU part features chrome over nickel plating on brass shell. Both finishes provide corrosion resistance; the nickel underplate in the ODU part offers additional protection in aggressive environments.

Q: Are there current rating limitations when substituting?

A: The LEMO PHG.0K.307.CLLC35 is rated for 2.5A maximum current. The ODU K10K0C-P07LCC0-3500 is rated for 4A. When substituting the LEMO part with the ODU part, application current must not exceed 2.5A to maintain design margin consistency with the original specification.

Q: Do both parts meet the same ingress protection standards?

A: The LEMO part meets IP66/IP68 standards. The ODU part meets IP68 standard. Both provide dust-tight and waterproof protection suitable for sealed connector applications. The LEMO part additionally meets IP66 (water jet resistant) specification.

Q: What is the cable opening compatibility between these parts?

A: LEMO PHG.0K.307.CLLC35 cable opening: 0.122" ~ 0.138" (3.10mm ~ 4.60mm). ODU K10K0C-P07LCC0-3500 cable opening: 0.118" ~ 0.138" (3.00mm ~ 4.60mm). The ODU part accommodates slightly smaller cable diameters at the lower end of the range.