PH10-8F-E Equivalent & Substitute Parts

Part Overview

The PH10-8F-E is a yellow 8 stud spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 10-12 AWG wire. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing procurement and system maintenance. The terminal features insulation with heat shrink construction and tin-plated copper contact material suitable for free-hanging in-line mounting applications.

Substiute Parts

PH10-8F-E

Panduit CorpIn Stock: 707PH10-8F-E Datasheet

Current PartRFQ

PV10-8F-L

Panduit CorpIn Stock: 1445PV10-8F-L Datasheet

SimilarRFQ

0191640070

MolexIn Stock: 35520191640070 Datasheet

SimilarRFQ

8-55872-3

TE Connectivity AMP ConnectorsIn Stock: 9658-55872-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PH10-8F-E is determined by strict alignment with the following core parameters: wire gauge (10-12 AWG), stud size (8 stud), termination method (crimp), mounting configuration (free-hanging in-line), contact material (copper), and terminal classification (standard). All identified substitute parts meet these fundamental electrical and mechanical requirements. Dimensional variations in overall length, width, and insulation diameter are documented but do not preclude functional substitution within the specified wire gauge and stud size category. Color variations are noted where applicable. Compliance certifications and product status are provided to support procurement decisions for obsolete part replacement.

Parameter Comparison

Engineering Selection Recommendations

PV10-8F-L (Panduit Corp) is the primary substitute for the PH10-8F-E. Both components are manufactured by Panduit Corp within the Pan-Term® series, share identical wire gauge and stud size specifications, and maintain functional compatibility. The PV10-8F-L is active in production status and ROHS3 compliant. Dimensional differences include reduced overall length (1.040" versus 1.200") and insulation diameter (0.225" versus 0.240"). The insulation material differs (vinyl versus polyolefin with heat shrink). This part is suitable for direct replacement in applications where dimensional tolerance permits.

0191640070 (Molex) provides cross-manufacturer substitution with identical electrical specifications. This component is manufactured under the Perma-Seal series and is ROHS3 compliant. Notable differences include increased overall length (1.390" versus 1.200"), larger insulation diameter (0.300" versus 0.240"), and NiAc insulation material with heat shrink construction. The contact finish is electro-tin rather than standard tin. This part accommodates applications requiring extended termination length and larger insulation envelope.

8-55872-3 (TE Connectivity AMP Connectors) offers substitution with color differentiation (blue versus yellow). This component maintains identical wire gauge, stud size, and termination specifications. Overall length (1.388" versus 1.200") and insulation diameter (0.240" matching the main part) are documented. Contact finish is EDP tin. RoHS compliance is confirmed. Color variation may require system-level assessment for application suitability.

All three substitute parts satisfy the core electrical and mechanical requirements for 10-12 AWG, 8 stud crimp spade terminals. Selection should account for dimensional constraints, insulation material compatibility, and color coding requirements specific to the end application.

Frequently Asked Questions (FAQ)

Q: Can PV10-8F-L directly replace PH10-8F-E in all applications?

A: PV10-8F-L meets all core electrical specifications (10-12 AWG wire gauge, 8 stud size, crimp termination). Dimensional differences exist: overall length is 1.040" compared to 1.200", and insulation diameter is 0.225" compared to 0.240". Insulation material differs (vinyl versus polyolefin with heat shrink). Direct replacement is suitable where these dimensional and material variations are compatible with the mechanical assembly and environmental requirements.

Q: What is the significance of the color difference in 8-55872-3?

A: The 8-55872-3 is blue rather than yellow. Color coding in terminal applications typically indicates wire gauge or circuit function. Substitution with a different color requires verification that the application does not depend on color-based identification or circuit tracing. Electrical specifications remain equivalent.

Q: How do insulation material differences affect substitution?

A: PH10-8F-E uses polyolefin with heat shrink insulation. PV10-8F-L uses vinyl insulation. 0191640070 uses NiAc with heat shrink. Material selection affects temperature rating, chemical resistance, and flexibility. Substitution is valid where the alternative insulation material meets the environmental and thermal requirements of the application.

Q: Are all substitute parts RoHS compliant?

A: PV10-8F-L is ROHS3 compliant. 0191640070 is ROHS3 compliant. 8-55872-3 is RoHS compliant. The main part PH10-8F-E lists RoHS status as not applicable due to its obsolete classification. All active substitutes meet current RoHS requirements.

Q: What packaging options are available?

A: PH10-8F-E original packaging is not specified. PV10-8F-L is available in bulk packaging. 0191640070 is available in bulk packaging. 8-55872-3 is available in bulk packaging. Bulk packaging is standard for all active substitute parts.

Q: Do dimensional variations affect crimp tool compatibility?

A: All parts maintain the 8 stud size and 10-12 AWG wire gauge, which are the primary parameters determining crimp tool compatibility. Variations in overall length and insulation diameter do not alter the crimp interface. Existing crimp tools for 8 stud, 10-12 AWG terminals remain compatible with all substitute parts.