PH10-10F-E Equivalent & Substitute Parts

Part Overview

The PH10-10F-E is a yellow insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 10-12 AWG wire onto a 10 stud. This component is classified as obsolete, indicating that direct procurement from original inventory may become limited. Identifying equivalent and substitute parts ensures continuity of supply and maintains design compatibility in applications requiring 10-12 AWG spade terminal connections with 10 stud mounting.

Substiute Parts

PH10-10F-E

Panduit CorpIn Stock: 942PH10-10F-E Datasheet

Current PartRFQ

PH10-10R-E

Panduit CorpIn Stock: 893PH10-10R-E Datasheet

SimilarRFQ

PV10-10F-L

Panduit CorpIn Stock: 1482PV10-10F-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PH10-10F-E is determined by strict alignment of the following critical parameters:

Primary Compatibility Criteria:

• Wire gauge range: 10-12 AWG
• Stud size: 10 Stud
• Termination method: Crimp
• Contact material: Copper
• Contact finish: Tin
• Mounting type: Free Hanging (In-Line)

Secondary Compatibility Considerations:

• Insulation material and diameter
• Overall length and width dimensions
• Terminal type (spade versus circular ring)
• Color coding (yellow)

The substitute parts identified maintain compatibility with the primary criteria. Variations in insulation material (polyolefin heat shrink versus vinyl), overall dimensions, and terminal geometry (spade versus ring) represent functional alternatives within the same electrical and mechanical class.

Parameter Comparison

Engineering Selection Recommendations

PH10-10R-E (Ring Terminal Alternative): This substitute maintains identical wire gauge (10-12 AWG), stud size (10), termination method (crimp), and overall length (1.200"). The primary difference is terminal geometry: circular ring configuration versus spade configuration. The PH10-10R-E is active product status with ROHS3 compliance, providing improved supply availability compared to the obsolete PH10-10F-E. Selection of this substitute is appropriate when circular ring terminals are functionally compatible with the application mounting interface.

PV10-10F-L (Spade Terminal Alternative): This substitute maintains the same terminal type (spade), wire gauge (10-12 AWG), stud size (10), and termination method (crimp). The PV10-10F-L features vinyl insulation instead of polyolefin heat shrink, with slightly reduced overall length (1.040" versus 1.200") and insulation diameter (0.225" versus 0.240"). The PV10-10F-L is active product status with ROHS3 compliance. This substitute is appropriate when spade terminal geometry is required and vinyl insulation is acceptable for the application environment.

Both substitutes provide ROHS3 compliance and active product status, ensuring long-term supply chain viability.

Frequently Asked Questions (FAQ)

Q: Can PH10-10R-E be used as a direct replacement for PH10-10F-E?

A: PH10-10R-E is electrically and mechanically compatible for 10-12 AWG wire termination on 10 stud applications. The primary difference is terminal geometry: PH10-10R-E features a circular ring terminal, while PH10-10F-E features a spade terminal. Substitution is valid only if the application mounting interface accepts circular ring terminals.

Q: What is the difference between PV10-10F-L and PH10-10F-E?

A: Both are spade terminals for 10-12 AWG wire on 10 stud. Key differences include: insulation material (vinyl versus polyolefin heat shrink), overall length (1.040" versus 1.200"), and insulation diameter (0.225" versus 0.240"). PV10-10F-L is active product with ROHS3 compliance, while PH10-10F-E is obsolete.

Q: Are the insulation materials interchangeable?

A: Polyolefin heat shrink and vinyl insulation provide different environmental protection characteristics. Selection between PH10-10F-E (polyolefin heat shrink) and PV10-10F-L (vinyl) depends on application temperature, moisture, and chemical exposure requirements. Both materials are suitable for standard electrical termination applications.

Q: Does the 0.16" difference in overall length affect compatibility?

A: The length difference between PH10-10F-E (1.200") and PV10-10F-L (1.040") may affect fit in space-constrained applications. Verify available mounting clearance before substitution.

Q: Are all three parts RoHS compliant?

A: PH10-10F-E is marked as "Not applicable" for RoHS status (obsolete product). Both PH10-10R-E and PV10-10F-L are ROHS3 compliant, meeting current regulatory requirements for new designs and procurement.

Q: What is the wire gauge compatibility range?

A: All three parts accommodate 10-12 AWG wire. This range covers both 10 AWG and 12 AWG conductors with appropriate crimp termination.