PEB22504HT-V11 Equivalent & Substitute Parts

Part Overview

The PEB22504HT-V11 is a specialized wireless interface IC manufactured by Infineon Technologies in a 100-LQFP package. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations. The part operates within a supply voltage range of 3.13V to 3.46V and is designed for wireless interface applications. Due to its obsolete status, substitute parts must be evaluated based on matching electrical specifications and package compatibility within the interface IC category.

Substiute Parts

PEB22504HT-V11

Infineon TechnologiesIn Stock: 828PEB22504HT-V11 Datasheet

Current PartRFQ

DS250DF810ABVT

Texas InstrumentsIn Stock: 2295DS250DF810ABVT Datasheet

MFR RecommendedRFQ

ST8024CTR

STMicroelectronicsIn Stock: 1560ST8024CTR Datasheet

MFR RecommendedRFQ

Z84C1008VEG

ZilogIn Stock: 2277Z84C1008VEG Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PEB22504HT-V11 are identified based on the following criteria:

Functional Category Match: All substitute parts are classified as specialized interface ICs, maintaining the same functional category as the main part.

Surface Mount Technology: All candidates utilize surface mount mounting technology, consistent with the original component.

Moisture Sensitivity Level: Substitute parts maintain MSL 3 (168 Hours) rating, ensuring equivalent handling and storage requirements.

REACH Compliance: All substitute parts maintain REACH Unaffected status, matching the regulatory profile of the original component.

Supply Voltage Consideration: While the main part specifies 3.13V ~ 3.46V operation, substitute parts may operate across different voltage ranges depending on their specific application requirements. Selection must verify voltage compatibility with system design parameters.

Package Diversity: Substitute parts are available in different package configurations (135-BGA, 28-TSSOP, 44-PLCC), reflecting the specialized nature of interface ICs where form factors vary by application.

Parameter Comparison

Engineering Selection Recommendations

DS250DF810ABVT (Texas Instruments): This part maintains active product status and ROHS3 compliance. The 135-FCBGA package represents a different form factor optimized for retimer interface applications. Selection requires confirmation that the BGA footprint is compatible with PCB design constraints and that the unspecified supply voltage range accommodates system requirements.

ST8024CTR (STMicroelectronics): This part is actively manufactured with ROHS3 compliance and operates across a wide supply voltage range (2.7V ~ 6.5V), providing flexibility for integration into systems with varying power specifications. The 28-TSSOP package offers a significantly smaller footprint compared to the original 100-LQFP, requiring PCB layout redesign. This part is optimized for smart card reader and writer applications.

Z84C1008VEG (Zilog): This part carries Last Time Buy status, indicating limited future availability. It operates at 5V supply voltage and is housed in a 44-PLCC package. ROHS3 compliance is confirmed. This option is suitable for access control systems applications but should be considered only when long-term supply continuity is not a primary concern.

Frequently Asked Questions (FAQ)

Q: Can the PEB22504HT-V11 be directly replaced with any of these substitute parts?

A: Direct replacement depends on application-specific requirements. All substitute parts share the interface IC category and surface mount technology, but differ in package configuration, supply voltage range, and application focus. PCB layout and electrical system design must be evaluated for each candidate.

Q: What is the primary difference between the substitute parts?

A: The substitute parts differ primarily in package type (135-BGA, 28-TSSOP, 44-PLCC), supply voltage specifications, and target applications (retimer, smart card reader/writer, access control systems). These differences reflect the specialized nature of interface ICs, where form factor and voltage requirements are application-dependent.

Q: Does the package change affect compatibility?

A: Yes. Package changes require PCB redesign, including footprint modification, trace routing adjustments, and thermal management considerations. The 135-BGA package requires BGA assembly capability; the 28-TSSOP and 44-PLCC packages use traditional lead-based soldering.

Q: Are all substitute parts currently available?

A: DS250DF810ABVT and ST8024CTR maintain active product status with current inventory. Z84C1008VEG is in Last Time Buy status, indicating limited future availability and potential supply constraints.

Q: How do supply voltage ranges affect selection?

A: The original part operates at 3.13V ~ 3.46V. ST8024CTR (2.7V ~ 6.5V) offers the widest voltage compatibility. Z84C1008VEG operates at fixed 5V. DS250DF810ABVT supply voltage is not specified and requires manufacturer datasheet verification before selection.

Q: What compliance certifications should be verified?

A: All parts maintain REACH Unaffected and MSL 3 (168 Hours) status. DS250DF810ABVT, ST8024CTR, and Z84C1008VEG are ROHS3 compliant. Verify ECCN and HTSUS classifications for export and procurement compliance in your jurisdiction.