PE880203 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The PE880203 is an active AC power entry connector module manufactured by Curtis Industries, designed as a receptacle with male blades in the IEC 320-C14 configuration. This component functions as a filtered power inlet for panel-mount applications, incorporating EMI/RFI filtering, an on-off switch, and a twin-fused holder. The part is stocked at 859 units and maintains full compliance with ROHS3, CE, CSA, TUV, and UL standards. Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part's specifications, enabling direct replacement in applications where the primary part becomes unavailable or when alternative packaging or termination methods are required.

Substiute Parts

PE880203

Curtis IndustriesIn Stock: 908PE880203 Datasheet

Current PartRFQ

FN388-4-21

Schaffner EMC Inc.In Stock: 944FN388-4-21 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PE880203 is determined by strict alignment of the following critical parameters:

• Connector style and type (IEC 320-C14, Receptacle, Male Blades - Module)
• Number of positions (3)
• Filter classification (Filtered, EMI/RFI, Commercial grade)
• Switch functionality (On-Off capability)
• Fuse accommodation and twin-fused holder configuration
• Mounting method (Panel Mount, Flange)
• Regulatory compliance (minimum: CSA, UL)
• RoHS compliance status (ROHS3)

The substitute part FN388-4-21 meets these criteria. Variations in termination method (Quick Connect versus Solder Eyelet), packaging format (Bulk versus Tray), and panel cutout specifications do not preclude substitution when the core electrical and mechanical parameters remain equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both PE880203 and FN388-4-21 maintain active product status and satisfy ROHS3 compliance requirements. The PE880203 carries CE, CSA, TUV, and UL certifications, while FN388-4-21 holds CSA, UL, and VDE certifications. Selection between these parts depends on termination requirements: the PE880203 uses Quick Connect terminals suitable for direct connection to 0.110" (2.8mm) receptacles, whereas FN388-4-21 employs Solder Eyelet termination for direct PCB or wire soldering. The FN388-4-21 offers additional flexibility with front or rear side mount capability and accommodates panel thicknesses from 0.79mm to 3.20mm. Packaging format differs (Bulk versus Tray), which may influence procurement and inventory management strategies. Both parts support identical electrical specifications for IEC 320-C14 applications with commercial-grade EMI/RFI filtering and twin-fused protection.

Frequently Asked Questions (FAQ)

Q: Can FN388-4-21 directly replace PE880203 in existing assemblies?

A: Direct replacement depends on termination compatibility. If the existing assembly uses Quick Connect terminals, the PE880203's 0.110" (2.8mm) connectors are required. If the assembly accommodates solder eyelet termination, FN388-4-21 is compatible. Both parts share identical IEC 320-C14 connector geometry, filtering, and switching functionality.

Q: What are the key differences between these substitute parts?

A: The primary differences are termination method (Quick Connect versus Solder Eyelet), packaging format (Bulk versus Tray), panel thickness accommodation range, and certification scope. Electrical performance, connector style, filter type, and fuse configuration remain equivalent.

Q: Are both parts suitable for the same voltage and current applications?

A: The PE880203 specifies 3A at 250VAC for the appliance inlet. The FN388-4-21 specifies 4A at the filter stage. Both parts are designed for IEC 320-C14 applications and support identical connector configurations. Verify application requirements against the specific current and voltage ratings of each part.

Q: What certifications apply to both parts?

A: Both PE880203 and FN388-4-21 hold CSA and UL certifications. The PE880203 additionally carries CE and TUV approvals, while FN388-4-21 includes VDE certification. All certifications are current and active.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (Bulk for PE880203, Tray for FN388-4-21) affects only procurement, storage, and handling. Electrical and mechanical specifications remain unchanged regardless of packaging method.