PE830203 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The PE830203 is an IEC 320-C14 power entry connector receptacle manufactured by Curtis Industries, designed for AC power applications requiring filtered EMI/RFI suppression. This panel-mount, snap-in module accommodates twin fused protection and operates at 250VAC with a 3A appliance inlet rating. The component is actively produced and maintains full compliance with CE, CSA, TUV, and UL certifications. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and regulatory approvals align with the original design requirements.

Substiute Parts

PE830203

Curtis IndustriesIn Stock: 804PE830203 Datasheet

Current PartRFQ

FN382-4-22

Schaffner EMC Inc.In Stock: 882FN382-4-22 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The FN382-4-22 (Schaffner EMC Inc.) qualifies as a substitute based on the following alignment criteria:

Electrical Compatibility:

• Identical connector style: IEC 320-C14
• Identical connector type: Receptacle, Male Blades - Module
• Identical number of positions: 3
• Identical filter type: Filtered (EMI, RFI) - Commercial
• Identical switch configuration: Switch On-Off
• Identical fuse accommodation: Twin Fused

Mechanical Compatibility:

• Identical mounting type: Panel Mount, Snap-In
• Compatible panel thickness range: 0.031" ~ 0.126" (0.79mm ~ 3.20mm) encompasses the original specification
• Identical panel cutout dimensions classification: Variable Size

Regulatory Compliance:

• Overlapping certifications: CSA, UL (both present in original)
• Identical RoHS status: ROHS3 Compliant
• Identical REACH status: REACH Unaffected
• Identical ECCN and HTSUS classifications

Termination Difference: The FN382-4-22 uses Solder Eyelet termination versus the PE830203's Quick Connect - 0.110" (2.8mm) termination. This represents a functional difference requiring circuit board design accommodation.

Parameter Comparison

Engineering Selection Recommendations

PE830203 Selection Criteria:

• Quick Connect termination required for rapid assembly or field replacement
• TUV certification mandatory for specific regional compliance
• CE marking required for European Union market deployment
• Bulk packaging preferred for high-volume manufacturing

FN382-4-22 Selection Criteria:

• Solder Eyelet termination compatible with PCB assembly processes
• VDE certification acceptable for European applications
• CSA and UL certifications sufficient for North American markets
• Tray packaging suitable for automated pick-and-place operations
• IP40 ingress protection rating provides enhanced environmental sealing
• UL94 V-2 material flammability rating specified for flame-resistant applications

Both components maintain active product status and full RoHS3 compliance. Selection between these parts depends on termination method compatibility with the target circuit board design and regional certification requirements.

Frequently Asked Questions (FAQ)

Q: Can FN382-4-22 directly replace PE830203 in existing designs? A: Electrical and mechanical compatibility is confirmed. The primary design consideration is termination method: PE830203 uses Quick Connect terminals while FN382-4-22 requires solder connections. Circuit board layout modification is necessary for substitution.

Q: Are the current and voltage ratings equivalent? A: The PE830203 specifies 3A at 250VAC for the appliance inlet. The FN382-4-22 provides 4A filter current rating. Both components support the same IEC 320-C14 connector standard and filtering classification.

Q: What are the panel thickness compatibility differences? A: PE830203 accommodates 0.031" to 0.125" panel thickness. FN382-4-22 accommodates 0.031" to 0.126" panel thickness. The FN382-4-22 range is marginally wider and fully encompasses the original specification.

Q: Do both parts meet the same regulatory standards? A: Both are ROHS3 compliant and REACH unaffected. PE830203 carries CE, CSA, TUV, and UL certifications. FN382-4-22 carries CSA, UL, and VDE certifications. Overlapping certifications (CSA, UL) confirm compatibility for North American applications. Regional requirements determine if TUV or VDE certification is mandatory.

Q: What is the difference in packaging? A: PE830203 is supplied in bulk packaging with 711 pieces in stock. FN382-4-22 is supplied in tray packaging with 850 pieces in stock. Packaging selection affects receiving, storage, and assembly line integration procedures.

Q: Does FN382-4-22 provide additional environmental protection? A: FN382-4-22 specifies IP40 ingress protection and UL94 V-2 material flammability rating. PE830203 does not list these specifications. These ratings indicate enhanced environmental sealing and flame resistance in the substitute part.