PE820206 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The PE820206 is an AC power entry connector module manufactured by Curtis Industries, designed as a receptacle with male blades conforming to the IEC 320-C14 standard. This filtered power entry module is rated for 6A at 250VAC and features panel-mount, snap-in installation with integrated EMI/RFI filtering, on-off switch functionality, and twin-fused fuse holder accommodation. The product is currently active in production with 777 units in stock. Substitute parts are identified when equivalent electrical ratings, connector standards, filtering characteristics, and mechanical mounting specifications align with the original design requirements.

Substiute Parts

PE820206

Curtis IndustriesIn Stock: 833PE820206 Datasheet

Current PartRFQ

FN382-6-21

Schaffner EMC Inc.In Stock: 1229FN382-6-21 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PE820206 is determined by strict alignment of the following critical parameters:

• Connector Standard & Type: IEC 320-C14 receptacle with male blades configuration
• Electrical Ratings: 6A current capacity and 250VAC voltage rating
• Filtering: EMI/RFI commercial-grade filtering
• Switching & Fusing: On-off switch with twin-fused fuse holder
• Mechanical Interface: Panel-mount, snap-in installation with compatible panel thickness accommodation
• Number of Positions: 3-position configuration
• Regulatory Compliance: Active product status with recognized safety certifications

The FN382-6-21 (Schaffner EMC Inc.) meets these substitution criteria through equivalent connector standard, filtering architecture, switching functionality, and fuse accommodation. Variations in termination method (solder eyelet vs. quick connect) and packaging format (tray vs. bulk) do not preclude substitution when mechanical and electrical requirements are satisfied.

Parameter Comparison

Engineering Selection Recommendations

Selection between PE820206 and FN382-6-21 is based on the following engineering criteria:

PE820206 Selection Factors:

• Quick-connect termination (0.110" / 2.8mm) is required for rapid assembly or modular circuit integration
• Bulk packaging format aligns with high-volume procurement workflows
• TUV certification is a mandatory requirement for the application

FN382-6-21 Selection Factors:

• Solder eyelet termination is compatible with permanent PCB or harness integration
• Tray packaging format supports controlled component handling and traceability
• VDE certification satisfies European regulatory requirements
• Ingress protection rating (IP40) provides enhanced environmental sealing

Both parts maintain ROHS3 compliance and active product status. Certification overlap (CSA, UL) ensures interchangeability for applications requiring these specific approvals. Termination method represents the primary design consideration; circuit architecture must accommodate either quick-connect or solder eyelet integration.

Frequently Asked Questions (FAQ)

Q: Can FN382-6-21 directly replace PE820206 in an existing assembly?

A: Direct replacement depends on termination compatibility. PE820206 uses quick-connect terminals (0.110" / 2.8mm), while FN382-6-21 uses solder eyelet termination. If the circuit design accommodates solder eyelet connection, substitution is electrically and mechanically valid. If quick-connect is mandatory, FN382-6-21 is not suitable without circuit redesign.

Q: Are the electrical ratings equivalent between these parts?

A: Both parts are rated for 6A current capacity at 250VAC with IEC 320-C14 connector standard. Electrical performance is equivalent for applications within these specifications.

Q: What is the significance of the panel thickness tolerance difference?

A: PE820206 accommodates panel thickness of 0.031" ~ 0.125" (0.79mm ~ 3.18mm), while FN382-6-21 accommodates 0.031" ~ 0.126" (0.79mm ~ 3.20mm). The 0.001" (0.02mm) difference at the upper limit is negligible for standard panel materials and does not affect practical substitution.

Q: Do both parts provide equivalent EMI/RFI filtering?

A: Both parts feature commercial-grade EMI/RFI filtering. Specific filter performance characteristics are not provided in the technical data; filtering architecture is equivalent for standard industrial applications.

Q: Which certifications are common to both parts?

A: CSA and UL certifications are present on both PE820206 and FN382-6-21. PE820206 additionally carries CE and TUV approvals; FN382-6-21 additionally carries VDE approval. Application requirements determine which certification set is mandatory.

Q: Does packaging format affect electrical or mechanical performance?

A: No. PE820206 is supplied in bulk packaging; FN382-6-21 is supplied in tray packaging. Packaging format affects logistics, traceability, and handling procedures but does not alter component electrical or mechanical specifications.

Q: Is the IP40 ingress protection rating on FN382-6-21 a functional advantage?

A: IP40 rating on FN382-6-21 indicates enhanced environmental sealing against solid particle ingress. PE820206 does not specify an ingress protection rating. If environmental protection is a design requirement, FN382-6-21 provides documented sealing performance.