PE810203 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The PE810203 is an AC power entry connector module manufactured by Curtis Industries, designed as a receptacle with male blades conforming to the IEC 320-C14 standard. This filtered power entry module is intended for panel-mount, snap-in installation in commercial applications requiring EMI/RFI filtering and integrated fuse accommodation. The product is currently active in inventory with 700 units available. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and regulatory approvals align with the original component's functional requirements.

Substiute Parts

PE810203

Curtis IndustriesIn Stock: 746PE810203 Datasheet

Current PartRFQ

FN380-4-22

Schaffner EMC Inc.In Stock: 1037FN380-4-22 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PE810203 is determined by strict alignment of the following critical parameters:

• Connector style and type: IEC 320-C14 receptacle with male blades
• Electrical specifications: 250VAC rated voltage and compatible current handling
• Mechanical interface: Panel mount, snap-in configuration with compatible panel thickness accommodation
• Functional features: Integrated EMI/RFI filtering, on-off switch, and fuse holder
• Regulatory compliance: Active product status with recognized approval agencies (CE, CSA, UL, VDE, TUV)
• Environmental compliance: ROHS3 compliance and REACH unaffected status

The substitute part FN380-4-22 meets these criteria through equivalent IEC 320-C14 connector geometry, identical three-position configuration, matching panel-mount snap-in installation method, integrated commercial-grade EMI/RFI filtering, on-off switch functionality, and fuse holder accommodation. Differences in termination method (Quick Connect versus Solder Eyelet) and filter current rating do not preclude substitution when the appliance inlet specifications are compatible with the application circuit design.

Parameter Comparison

Engineering Selection Recommendations

Both PE810203 and FN380-4-22 are active products with current manufacturing status and full ROHS3 compliance. Selection between these parts should be based on the following engineering considerations:

The PE810203 features Quick Connect termination (0.110" / 2.8mm), suitable for applications requiring rapid assembly or field replacement without soldering. The FN380-4-22 employs Solder Eyelet termination, appropriate for permanent circuit board integration where mechanical robustness and solder joint reliability are prioritized.

Regulatory approval coverage differs: PE810203 includes TUV certification in addition to CE, CSA, and UL; FN380-4-22 includes VDE certification. Both meet CSA and UL requirements. Application-specific regulatory requirements should determine final selection.

Panel thickness accommodation is functionally equivalent, with FN380-4-22 supporting marginally greater maximum thickness (0.126" versus 0.125").

Frequently Asked Questions (FAQ)

Q: Can FN380-4-22 directly replace PE810203 in existing designs?

A: Direct replacement is possible when the circuit design accommodates the termination method difference. PE810203 uses Quick Connect terminals; FN380-4-22 uses Solder Eyelet terminals. PCB layout and connector interface design must be verified for compatibility.

Q: Are the electrical ratings equivalent between these parts?

A: Both parts conform to IEC 320-C14 specifications with 250VAC rated voltage. PE810203 specifies 3A appliance inlet current rating. FN380-4-22 specifies 4A filter current rating. Application circuit requirements determine which rating is applicable.

Q: What is the significance of the filter current rating difference?

A: The filter current rating (4A for FN380-4-22) indicates the maximum current the integrated EMI/RFI filter can handle. The appliance inlet current rating (3A for PE810203) specifies the connector contact rating. These are distinct electrical parameters; both must be evaluated against application requirements.

Q: Do both parts accommodate the same fuse types?

A: Both parts include fuse holder accommodation. Fuse specifications are not provided in the component data. Fuse compatibility must be verified through detailed mechanical drawings and fuse holder specifications from the respective manufacturers.

Q: Are there packaging differences that affect procurement?

A: PE810203 is supplied in Bulk packaging; FN380-4-22 is supplied in Tray packaging. Inventory availability differs (700 units versus 985 units). Packaging format may affect handling, storage, and integration into assembly processes.

Q: Which certifications should I prioritize for my application?

A: Both parts hold CSA and UL certifications. PE810203 additionally includes CE and TUV; FN380-4-22 additionally includes VDE. Select the part whose certification portfolio aligns with your target market and regulatory jurisdiction requirements.