PE-53807 Equivalent & Substitute Parts

Part Overview

The PE-53807 is a 26 µH shielded toroidal inductor rated for 450 mA with 620 mOhm DC resistance, designed for through-hole mounting in radial, vertical corner terminal configuration. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing production and maintenance applications. The part operates across -40°C to 130°C and meets RoHS non-compliant specifications with unlimited moisture sensitivity rating.

Substiute Parts

PE-53807

Pulse ElectronicsIn Stock: 867PE-53807 Datasheet

Current PartRFQ

PE-53807NL

Pulse ElectronicsIn Stock: 669PE-53807NL Datasheet

DirectRFQ

SH150T-0.45-26

Amgis, LLCIn Stock: 826SH150T-0.45-26 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PE-53807 are qualified based on the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

• Inductance value: 26 µH ±20%
• Current rating: 450 mA minimum
• DC resistance: 620 mOhm
• Mounting type: Through hole
• Package configuration: Radial corner terminals
• Operating temperature range: Minimum -40°C to 125°C

Substitution Logic:

PE-53807NL qualifies as a direct substitute with identical electrical specifications and mechanical form factor. The primary distinction is product status (active vs. obsolete) and RoHS compliance (ROHS3 compliant vs. non-compliant), making it suitable for new designs and production continuity.

SH150T-0.45-26 qualifies as a functional equivalent with matching inductance, current rating, and DC resistance. Key differences include shielding type (unshielded vs. shielded), core material (iron powder), terminal orientation (horizontal vs. vertical), and operating temperature maximum (125°C vs. 130°C). This part is suitable for applications where EMI shielding is not critical.

Parameter Comparison

Engineering Selection Recommendations

PE-53807NL is the preferred substitute for direct replacement applications. It maintains identical electrical and mechanical specifications while offering active product status and ROHS3 compliance. This part is recommended for new production designs and applications requiring regulatory compliance with modern environmental standards.

SH150T-0.45-26 serves as a functional alternative for applications where shielding requirements are not critical. The unshielded configuration may introduce EMI considerations in sensitive circuits. The horizontal terminal orientation differs from the vertical configuration of the main part, requiring PCB layout verification. The maximum operating temperature of 125°C is 5°C lower than the PE-53807, which may impact thermal margin calculations in high-temperature applications. This part is suitable for cost-optimized designs where EMI isolation is not a design constraint.

Frequently Asked Questions (FAQ)

Q: Can PE-53807NL be used as a direct replacement for PE-53807?

A: Yes. PE-53807NL provides identical inductance (26 µH), current rating (450 mA), DC resistance (620 mOhm), shielding, and mechanical form factor. The primary advantages are active product status and ROHS3 compliance. No circuit modifications are required.

Q: What are the key differences between PE-53807NL and SH150T-0.45-26?

A: Both parts share identical inductance, current rating, and DC resistance specifications. The primary differences are: shielding type (shielded vs. unshielded), terminal orientation (vertical vs. horizontal), core material (not specified vs. iron powder), and maximum operating temperature (130°C vs. 125°C). Terminal orientation requires PCB layout verification before substitution.

Q: Is SH150T-0.45-26 suitable for EMI-sensitive applications?

A: SH150T-0.45-26 is unshielded, which may not provide adequate EMI isolation for noise-sensitive circuits. Applications requiring electromagnetic shielding should use PE-53807 or PE-53807NL, both of which are shielded configurations.

Q: What packaging formats are available for these substitutes?

A: PE-53807NL is supplied in bulk packaging, while SH150T-0.45-26 is supplied in tray packaging. Packaging selection depends on production volume and handling requirements.

Q: Are all substitute parts RoHS compliant?

A: PE-53807NL and SH150T-0.45-26 are both ROHS3 compliant. The original PE-53807 is RoHS non-compliant. For applications requiring regulatory compliance, use PE-53807NL or SH150T-0.45-26.

Q: What is the temperature operating range difference between substitutes?

A: PE-53807 and PE-53807NL operate from -40°C to 130°C. SH150T-0.45-26 operates from -40°C to 125°C. Applications operating above 125°C require PE-53807 or PE-53807NL.