PDTC124XT,215 Equivalent & Substitute Parts

Part Overview

The PDTC124XT,215 is a pre-biased NPN bipolar junction transistor (BJT) manufactured by Nexperia USA Inc. in the TO-236AB surface mount package. This component is designed for general-purpose switching and amplification applications requiring a 50 V collector-emitter breakdown voltage rating with 100 mA maximum collector current. The device is actively produced and carries AEC-Q100 automotive qualification, making it suitable for automotive and industrial applications. Equivalent and substitute parts are identified based on matching electrical characteristics, package compatibility, and compliance certifications to ensure functional interchangeability in circuit designs.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN - Pre-Biased	—
Current - Collector (Ic) (Max)	100	mA
Voltage - Collector Emitter Breakdown (Max)	50	V
Resistor - Base (R1)	22	kOhms
Resistor - Emitter Base (R2)	47	kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce	80 @ 5mA, 5V	—
Vce Saturation (Max) @ Ib, Ic	150mV @ 500µA, 10mA	—
Current - Collector Cutoff (Max)	1	µA
Power - Max	250	mW
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Grade	Automotive	—
Qualification	AEC-Q100	—

Substitute Part Grouping Explanation

Substitute parts for the PDTC124XT,215 are classified into two categories based on electrical and mechanical compatibility:

Direct Substitutes (Electrical and Package Equivalents): Parts that maintain identical or functionally equivalent electrical specifications and package form factors. These parts share the same base resistor values (R1 = 22 kOhms, R2 = 47 kOhms), maximum collector current (100 mA), collector-emitter breakdown voltage (50 V), and surface mount TO-236-3/SOT-23-3 package designation. Direct substitutes include MMUN2234LT1G and SMMUN2234LT1G from onsemi, and DDTC124XCA-7-F and DTC124XCAT116 from Diodes Incorporated and Rohm Semiconductor respectively.

Similar Substitutes (Electrical Equivalents with Package Variations): Parts that maintain core electrical specifications but differ in package form factor or secondary characteristics such as transition frequency or power dissipation rating. These parts are suitable for applications where package footprint differences are acceptable. Similar substitutes include DDTC124GUA-7-F (SOT-323), DDTC124TCA-7-F (SOT-23-3 with different hFE characteristics), DDTC124TE-7-F (SOT-523), and DDTC124TUA-7-F (SOT-323).

Restricted Substitutes (Electrical Deviations): Parts with differing base resistor networks or collector current ratings that require circuit re-evaluation. DTC124XKAT146 (50 mA maximum collector current) and DTC143XKAT146 (different resistor values: R1 = 4.7 kOhms, R2 = 10 kOhms) fall into this category and are not recommended as direct replacements without design verification.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) mA	Vce(BR) V	R1 kOhms	R2 kOhms	hFE (Min)	Vce Sat (Max) mV	Package	Power (Max) mW
PDTC124XT,215	Nexperia USA Inc.	100	50	22	47	80 @ 5mA, 5V	150 @ 500µA, 10mA	TO-236AB	250
MMUN2234LT1G	onsemi	100	50	22	47	80 @ 5mA, 10V	250 @ 1mA, 10mA	SOT-23-3	246
SMMUN2234LT1G	onsemi	100	50	22	47	80 @ 5mA, 10V	250 @ 1mA, 10mA	SOT-23-3	246
DDTC124GUA-7-F	Diodes Incorporated	100	50	—	22	56 @ 5mA, 5V	300 @ 500µA, 10mA	SOT-323	200
DDTC124TCA-7-F	Diodes Incorporated	100	50	22	—	100 @ 1mA, 5V	300 @ 500µA, 5mA	SOT-23-3	200
DDTC124TE-7-F	Diodes Incorporated	100	50	22	—	100 @ 1mA, 5V	300 @ 500µA, 5mA	SOT-523	150
DDTC124TUA-7-F	Diodes Incorporated	100	50	22	—	100 @ 1mA, 5V	300 @ 500µA, 5mA	SOT-323	200
DDTC124XCA-7-F	Diodes Incorporated	100	50	22	47	68 @ 5mA, 5V	300 @ 500µA, 10mA	SOT-23-3	200
DTC124XCAT116	Rohm Semiconductor	100	50	22	47	68 @ 5mA, 5V	300 @ 500µA, 10mA	SST3	200
DTC124XKAT146	Rohm Semiconductor	50	50	22	47	68 @ 5mA, 5V	300 @ 500µA, 10mA	SMT3	200
DTC143XKAT146	Rohm Semiconductor	100	50	4.7	10	30 @ 10mA, 5V	300 @ 500µA, 10mA	SMT3	200

Engineering Selection Recommendations

Recommended Direct Substitutes:

MMUN2234LT1G and SMMUN2234LT1G from onsemi are functionally equivalent to the PDTC124XT,215. Both parts maintain identical base resistor networks (R1 = 22 kOhms, R2 = 47 kOhms), maximum collector current (100 mA), and collector-emitter breakdown voltage (50 V). These parts are actively produced, RoHS3 compliant, and carry unlimited moisture sensitivity level (MSL 1). The primary difference is packaging format (Tape & Reel versus Cut Tape), which does not affect electrical performance. Both parts are suitable for direct replacement in existing designs.

DDTC124XCA-7-F from Diodes Incorporated is electrically compatible with the PDTC124XT,215, sharing identical base resistor values, maximum collector current, and breakdown voltage. This part is actively produced and RoHS3 compliant. The SOT-23-3 package is mechanically equivalent to the TO-236AB package. The slightly lower hFE minimum (68 versus 80) and higher saturation voltage (300 mV versus 150 mV) represent minor deviations that are acceptable for most switching applications.

DTC124XCAT116 from Rohm Semiconductor is electrically equivalent to the PDTC124XT,215 with identical resistor networks and electrical ratings. The SST3 package is mechanically compatible with TO-236-3 designations. This part is actively produced and RoHS3 compliant.

Conditional Substitutes:

DDTC124TCA-7-F and DDTC124TUA-7-F from Diodes Incorporated are suitable substitutes where the emitter-base resistor (R2) specification is not critical to circuit function. These parts maintain the 22 kOhms base resistor and 100 mA collector current rating but lack specified R2 values. Both are actively produced and RoHS3 compliant.

DDTC124TE-7-F from Diodes Incorporated is suitable for applications where power dissipation is not a limiting factor. This part has a reduced maximum power rating (150 mW versus 250 mW) and uses the SOT-523 package, which is physically smaller than TO-236AB. Selection requires verification that circuit power requirements do not exceed 150 mW.

Not Recommended as Direct Substitutes:

DTC124XKAT146 from Rohm Semiconductor has a reduced maximum collector current (50 mA versus 100 mA) and is not suitable for applications requiring the full 100 mA rating.

DTC143XKAT146 from Rohm Semiconductor has significantly different base resistor values (R1 = 4.7 kOhms, R2 = 10 kOhms) and lower DC current gain (30 versus 80), resulting in different circuit behavior. This part requires complete circuit re-evaluation and is not recommended as a substitute.

Frequently Asked Questions (FAQ)

Q: Can MMUN2234LT1G be used as a direct replacement for PDTC124XT,215?

A: Yes. MMUN2234LT1G is a direct electrical equivalent with identical base resistor values (22 kOhms and 47 kOhms), maximum collector current (100 mA), and collector-emitter breakdown voltage (50 V). Both parts use compatible surface mount packages (SOT-23-3 and TO-236AB are mechanically equivalent). The primary difference is packaging format (Tape & Reel versus Cut Tape), which does not affect circuit performance.

Q: What is the difference between DDTC124XCA-7-F and PDTC124XT,215?

A: Both parts share identical base resistor networks, maximum collector current (100 mA), and breakdown voltage (50 V). The DDTC124XCA-7-F has a slightly lower DC current gain minimum (68 versus 80 at 5 mA, 5 V) and higher saturation voltage (300 mV versus 150 mV). These differences are minor and acceptable for most switching applications. The SOT-23-3 package is mechanically compatible with TO-236AB.

Q: Why is DTC124XKAT146 not recommended as a substitute?

A: DTC124XKAT146 has a maximum collector current rating of 50 mA, which is half the 100 mA rating of PDTC124XT,215. Applications requiring the full 100 mA collector current cannot use this part without circuit modification.

Q: Can DDTC124TE-7-F replace PDTC124XT,215 in all applications?

A: DDTC124TE-7-F is electrically compatible but has a reduced maximum power dissipation rating (150 mW versus 250 mW). This part is suitable only for applications where circuit power dissipation does not exceed 150 mW. The SOT-523 package is also physically smaller than TO-236AB, which may affect PCB layout compatibility.

Q: What does "pre-biased" mean in the context of these transistors?

A: Pre-biased transistors have integrated base resistor networks that establish a defined bias condition without external resistors. The PDTC124XT,215 contains internal resistors (R1 = 22 kOhms, R2 = 47 kOhms) that set the transistor's operating point. Substitute parts must have matching resistor values to maintain equivalent circuit behavior.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed in this document are RoHS3 compliant and carry unlimited moisture sensitivity level (MSL 1), matching the compliance status of PDTC124XT,215.

Q: What is the significance of the package designation TO-236AB versus SOT-23-3?

A: TO-236AB and SOT-23-3 are equivalent package designations for the same three-lead surface mount package. Both refer to the same physical form factor with identical pin spacing and dimensions. Parts specified with either designation are mechanically interchangeable on PCBs designed for this package type.

Q: Can DDTC124GUA-7-F be used in place of PDTC124XT,215?

A: DDTC124GUA-7-F is electrically compatible for most applications but uses the SOT-323 package, which is physically smaller than TO-236AB. The SOT-323 package has a different footprint and pin spacing, requiring PCB redesign. Additionally, DDTC124GUA-7-F lacks a specified base resistor (R1) value, which may affect circuit behavior in applications sensitive to base bias conditions.

Q: What is the difference between onsemi MMUN2234LT1G and SMMUN2234LT1G?

A: Both parts are electrically identical with the same electrical specifications and package designation (SOT-23-3). The difference is in packaging format: MMUN2234LT1G is supplied in Tape & Reel format, while SMMUN2234LT1G is also supplied in Tape & Reel format. Both are suitable for automated assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message