PDME2-24-D9-D Equivalent & Substitute Parts Reference

Part Overview

The PDME2-24-D9-D from CUI Inc. is an isolated DC-DC converter module designed for ITE (Commercial) applications, providing dual outputs of 9V and -9V at up to 111mA each. The product is currently active, RoHS3 compliant, and available in tube packaging with through hole mounting in a 14-DIP module (6 leads). Sourcing equivalent or substitute models is necessary for supply chain flexibility, alternate sourcing, and design robustness.

Substiute Parts

PDME2-24-D9-D

CUI Inc.In Stock: 722PDME2-24-D9-D Datasheet

Current PartRFQ

A2409D-2WR3

Mornsun America, LLCIn Stock: 1002A2409D-2WR3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are determined exclusively by matching the provided key electrical and mechanical parameters. The required matching parameters are: number of outputs, input voltage range, output voltages, maximum output current, power rating, isolation voltage, package type, mounting type, operating temperature range, efficiency, physical dimensions, application type, RoHS compliance, and product status.

Parameter Comparison

Engineering Selection Recommendations

Both PDME2-24-D9-D and A2409D-2WR3 models are RoHS3 compliant, active, provide the required isolation voltage, number of outputs, matching outputs and input ranges, and are supplied in the identical package dimensions and mounting format. These criteria establish component suitability exclusively within product status, RoHS compliance, and provided certifications.

Frequently Asked Questions (FAQ)

Q1: What are the essential parameters when selecting a substitute for PDME2-24-D9-D?
A1: Only the explicitly provided parameters are considered: number of outputs, input voltage range, output voltages, output currents, power rating, isolation voltage, package type, mounting style, operating temperature range, efficiency, application type, RoHS compliance, and product status.

Q2: Are there any package or mounting differences between PDME2-24-D9-D and A2409D-2WR3?
A2: Both parts use the 14-DIP Module with 6 leads and have identical physical dimensions and through hole mounting.

Q3: Is RoHS3 compliance and product status relevant for substitution?
A3: RoHS3 compliance and the 'active' product status are confirmed for both and are required for direct substitution.

Q4: Can the A2409D-2WR3 be used in ITE (Commercial) applications matching the original part?
A4: Both models specify suitability for ITE (Commercial) applications as per provided parameters.

Q5: Does the difference in listed power rating affect the substitution?
A5: The provided parameters confirm matching output voltages, currents, isolation, and mechanical compatibility; the higher listed power rating for A2409D-2WR3 does not violate substitution rules based on supplied information.