PD30ETR60PASA Equivalent & Substitute Parts

Part Overview

The PD30ETR60PASA is a retroreflective, polarized optical sensor manufactured by Carlo Gavazzi Inc., designed for detection applications requiring a 6-meter (236.2") sensing distance. This sensor operates with PNP output configuration and infrared light source (850nm), suitable for industrial automation and positioning tasks. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure long-term component availability for new designs and replacements.

Substiute Parts

PD30ETR60PASA

Carlo Gavazzi Inc.In Stock: 1180PD30ETR60PASA Datasheet

Current PartRFQ

PD30ETPR60BPA2IO

Carlo Gavazzi Inc.In Stock: 821PD30ETPR60BPA2IO Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The PD30ETPR60BPA2IO qualifies as a functional substitute based on the following critical parameters that determine compatibility:

Core Compatibility Parameters:

• Sensing method: Both employ retroreflective, polarized detection
• Sensing distance: Both maintain 6-meter (236.220") detection range
• Supply voltage: Both operate within 10V ~ 30V range
• Response time: Both specify 500µs response
• Cable length: Both feature 78.74" (2m) cable
• Operating temperature: Both rated -25°C ~ 60°C
• Connection method: Both use cable connection
• Adjustment type: Both feature adjustable potentiometer

Differences Requiring Evaluation:

• Output configuration: Substitute offers Push-Pull, NPN/PNP (vs. PNP only on original)
• Light source: Substitute uses Red (620nm) instead of Infrared (850nm)
• Ingress protection: Substitute rated IP67, IP68, IP69K (vs. IP68, IP69K on original)
• Product status: Substitute is Active (vs. Obsolete original)

Parameter Comparison

Engineering Selection Recommendations

The PD30ETPR60BPA2IO is an active product from Carlo Gavazzi Inc. and serves as the functional equivalent for the obsolete PD30ETR60PASA. Both sensors maintain identical sensing distance, supply voltage range, response time, and operating temperature specifications, ensuring compatibility in applications requiring retroreflective, polarized detection at 6-meter range.

The substitute part offers enhanced output flexibility through Push-Pull, NPN/PNP configuration, accommodating both NPN and PNP logic requirements. The extended ingress protection rating (IP67 addition) provides improved environmental sealing. The shift from infrared (850nm) to red (620nm) light source represents the primary technical distinction and must be evaluated against specific application requirements, particularly regarding ambient light conditions and reflector compatibility.

Selection of the PD30ETPR60BPA2IO is supported by its active product status, ensuring ongoing availability and manufacturer support for new installations and field replacements.

Frequently Asked Questions (FAQ)

Q: Can PD30ETPR60BPA2IO directly replace PD30ETR60PASA in existing installations?

A: Direct replacement is feasible for applications where the output configuration and light source wavelength are compatible with the existing circuit design. The PNP output of the original is supported by the substitute's NPN/PNP Push-Pull configuration. However, the light source change from infrared to red requires verification that reflectors and ambient conditions remain suitable for the new wavelength.

Q: What is the primary reason for substitution?

A: The PD30ETR60PASA is classified as obsolete, limiting future availability. The PD30ETPR60BPA2IO is an active product offering equivalent sensing performance and distance specifications.

Q: Are the sensing distances identical?

A: Both sensors specify 6-meter sensing distance (236.2" vs. 236.220"), representing equivalent detection range for practical applications.

Q: Does the output configuration difference affect compatibility?

A: The substitute's Push-Pull, NPN/PNP output is backward-compatible with PNP-only requirements. Applications using PNP logic can configure the substitute accordingly. Existing PNP circuits require no modification.

Q: What is the significance of the light source change?

A: The original uses infrared (850nm); the substitute uses red (620nm). Red light is more visible to ambient conditions and may be affected differently by environmental factors. Reflector compatibility and ambient light interference must be evaluated for the specific application environment.

Q: Are ingress protection ratings compatible?

A: The substitute offers equal or superior protection. Both maintain IP68 and IP69K ratings; the substitute adds IP67 capability, providing enhanced environmental sealing.

Q: Is cable length identical?

A: Both sensors feature 78.74" (2m) cable length, maintaining identical connection specifications.