PD30ETR60PAM5SA Equivalent & Substitute Parts

Part Overview

The PD30ETR60PAM5SA is a retroreflective, polarized optical sensor manufactured by Carlo Gavazzi Inc., designed for detection applications requiring a sensing distance of 236.2" (6m). This sensor features PNP output configuration with infrared (850nm) light source and operates across a supply voltage range of 10V to 30V. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, redesign, and procurement planning.

Substiute Parts

PD30ETR60PAM5SA

Carlo Gavazzi Inc.In Stock: 1064PD30ETR60PAM5SA Datasheet

Current PartRFQ

PD30ETPR60BPM5IO

Carlo Gavazzi Inc.In Stock: 1176PD30ETPR60BPM5IO Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PD30ETR60PAM5SA is determined by the following critical parameters:

• Sensing Method: Retroreflective, Polarized (required match)
• Sensing Distance: 236.2" (6m) nominal range (required match)
• Voltage Supply Range: 10V ~ 30V (required match)
• Response Time: 500µs (required match)
• Ingress Protection: IP68, IP69K minimum (required match)
• Operating Temperature Range: -25°C ~ 60°C (required match)
• Connection Method: Connector-based interface (required match)
• Adjustment Type: Adjustable, Potentiometer (required match)

The substitute part PD30ETPR60BPM5IO meets all critical electrical and mechanical parameters. While this substitute introduces variations in output configuration (Push-Pull, NPN/PNP versus PNP-only) and light source wavelength (Red 620nm versus Infrared 850nm), these differences represent functional enhancements within the retroreflective polarized sensor category and do not preclude substitution in applications where the sensing distance, supply voltage, response time, and environmental protection requirements are primary design constraints.

Parameter Comparison

Engineering Selection Recommendations

The PD30ETPR60BPM5IO is the identified substitute for the obsolete PD30ETR60PAM5SA. Selection of this substitute is supported by the following engineering factors:

Product Status: The substitute part maintains active product status with Carlo Gavazzi Inc., ensuring continued availability, technical support, and compliance with current manufacturing standards.

Electrical Compatibility: Both parts operate within the identical 10V to 30V supply voltage range and maintain the same 500µs response time specification, ensuring direct integration into existing power distribution and signal processing circuits.

Sensing Performance: The retroreflective, polarized sensing method and 6-meter nominal sensing distance are preserved, maintaining functional equivalence for target detection applications.

Environmental Protection: The substitute part exceeds the ingress protection rating of the original part (IP67, IP68, IP69K versus IP68, IP69K), providing enhanced environmental sealing suitable for harsh industrial environments.

Output Configuration Enhancement: The substitute part provides Push-Pull, NPN/PNP output configuration, which includes PNP compatibility with the original part while offering additional NPN and Push-Pull options for expanded circuit design flexibility.

Light Source Consideration: The shift from infrared (850nm) to red (620nm) light source represents a functional variation. Red light sources provide improved visibility in certain environmental conditions and may offer enhanced performance in applications with specific reflective material properties.

Frequently Asked Questions (FAQ)

Q: Can the PD30ETPR60BPM5IO directly replace the PD30ETR60PAM5SA in existing installations?

A: Yes, the substitute part meets all critical electrical and mechanical parameters. The PNP output configuration of the original part is supported by the Push-Pull, NPN/PNP output of the substitute. Connector compatibility (M8) and identical supply voltage range (10V ~ 30V) ensure direct integration. The light source wavelength difference (red 620nm versus infrared 850nm) may require evaluation based on specific reflective material properties in the application.

Q: What is the significance of the light source wavelength difference?

A: The original part uses infrared (850nm) light, while the substitute uses red (620nm) light. Both wavelengths are suitable for retroreflective polarized sensing. Red light may provide improved visibility and performance with certain reflective materials. Application-specific testing is not required for substitution eligibility; however, optical performance should be verified if the application involves specialized reflective surfaces.

Q: Are there any packaging differences between these parts?

A: The original part packaging is not specified in the available data. The substitute part is supplied in box packaging with M8 connector specification. Both parts use connector-based connection methods, ensuring mechanical compatibility in standard industrial sensor installations.

Q: What is the significance of the product status change from Obsolete to Active?

A: The substitute part's active status ensures ongoing manufacturer support, availability from authorized distributors, and compliance with current manufacturing and environmental standards. This eliminates supply chain risk associated with obsolete components.

Q: Are both parts from the same manufacturer?

A: Yes, both parts are manufactured by Carlo Gavazzi Inc., ensuring consistent design philosophy, quality standards, and technical support within the same product family.