PD30ETP60PASA Equivalent & Substitute Parts

Part Overview

The PD30ETP60PASA is a retroreflective, polarized optical sensor manufactured by Carlo Gavazzi Inc., designed for detection applications requiring a 6-meter (236.2") sensing distance. This sensor operates with PNP output configuration and is housed in a cable connection format with IP68/IP69K ingress protection. The product is currently classified as obsolete, making identification of compatible substitute parts essential for system maintenance and component procurement.

Substiute Parts

PD30ETP60PASA

Carlo Gavazzi Inc.In Stock: 928PD30ETP60PASA Datasheet

Current PartRFQ

PD30ETPR60BPA2IO

Carlo Gavazzi Inc.In Stock: 821PD30ETPR60BPA2IO Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PD30ETP60PASA is determined by the following critical parameters that must remain consistent or compatible:

Core Functional Parameters:

• Sensing method: Retroreflective, Polarized
• Sensing distance: 6 meters (236.2")
• Supply voltage range: 10V ~ 30V
• Response time: 500µs
• Light source wavelength: Red spectrum (620nm–625nm)
• Operating temperature range: -25°C ~ 60°C
• Ingress protection: IP67 or higher

Output Configuration Compatibility: The PD30ETP60PASA features PNP output. Substitute parts with push-pull or NPN/PNP configurable output are acceptable when the system design permits output stage adaptation or when the substitute provides selectable output modes.

Connection and Mechanical Compatibility:

• Cable connection method
• Cable length: 2 meters (78.74")
• Adjustment type: Potentiometer-based

Parameter Comparison

Engineering Selection Recommendations

The PD30ETPR60BPA2IO serves as a direct functional substitute for the PD30ETP60PASA based on the following engineering criteria:

Functional Equivalence: Both sensors maintain identical sensing distance (6 meters), supply voltage range (10V–30V), response time (500µs), and operating temperature specifications (-25°C to 60°C). The retroreflective, polarized sensing method and red light source wavelengths are within acceptable tolerance (620nm vs. 625nm).

Output Configuration Consideration: The substitute part features push-pull output with selectable NPN/PNP modes, providing greater flexibility than the fixed PNP configuration of the original part. Systems designed for PNP operation can utilize the PNP mode of the substitute without modification.

Product Status Advantage: The PD30ETPR60BPA2IO is classified as active, ensuring ongoing availability, technical support, and supply chain continuity compared to the obsolete status of the original part.

Compliance and Certification: The substitute part carries REACH Unaffected status, confirming regulatory compliance for European markets and hazardous substance restrictions.

Frequently Asked Questions (FAQ)

Q: Can the PD30ETPR60BPA2IO directly replace the PD30ETP60PASA without circuit modifications?

A: The substitute part is functionally compatible when the system accepts PNP output. The push-pull output configuration of the substitute includes a selectable PNP mode that operates within the same electrical parameters as the original part. Verify that your application controller supports the cable connection interface and potentiometer adjustment method.

Q: What is the difference in light source wavelength between the two parts?

A: The original part uses red light at 625nm, while the substitute operates at 620nm. Both wavelengths fall within the red spectrum and are compatible with standard retroreflective targets. The 5nm difference does not affect sensing distance or polarization performance.

Q: Does the substitute part offer improved ingress protection?

A: The PD30ETPR60BPA2IO supports IP67, IP68, and IP69K ratings, compared to the original part's IP68 and IP69K ratings. The addition of IP67 capability provides flexibility for applications with varying environmental requirements while maintaining the same maximum protection levels.

Q: Is the cable length identical between the two parts?

A: Both parts feature 2-meter (78.74") cable lengths, ensuring mechanical compatibility with existing installation infrastructure and cable routing.

Q: What does the push-pull output configuration mean for my application?

A: Push-pull output provides both NPN and PNP switching modes, allowing the sensor to interface with a wider range of controller inputs. If your system requires PNP operation, the substitute part's PNP mode delivers equivalent performance to the original fixed PNP configuration.

Q: Are there any packaging differences between the original and substitute parts?

A: The original part has no specified packaging designation, while the substitute is supplied in box packaging. This difference affects only storage and shipment; the sensor itself and its functional specifications remain unchanged.