PD30ETP60PAM5SA Equivalent & Substitute Parts

Part Overview

The PD30ETP60PAM5SA is a retroreflective, polarized optical sensor manufactured by Carlo Gavazzi Inc., designed for detection applications requiring a sensing distance of 236.2" (6m). This sensor features PNP output configuration with red light source (625nm) and operates across a supply voltage range of 10V to 30V. The product is currently classified as obsolete, making identification of compatible substitute parts essential for system maintenance and component procurement.

Substiute Parts

PD30ETP60PAM5SA

Carlo Gavazzi Inc.In Stock: 933PD30ETP60PAM5SA Datasheet

Current PartRFQ

PD30ETPR60BPM5IO

Carlo Gavazzi Inc.In Stock: 1176PD30ETPR60BPM5IO Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PD30ETP60PAM5SA is determined by the following critical parameters:

• Sensing Method: Must be retroreflective and polarized
• Sensing Distance: Must match or exceed 236.2" (6m)
• Voltage Supply Range: Must accommodate 10V ~ 30V operation
• Response Time: Must be 500µs or faster
• Light Source: Red wavelength (620nm–625nm acceptable range)
• Ingress Protection: Must maintain IP68 and IP69K ratings
• Operating Temperature: Must support -25°C ~ 60°C range
• Connection Method: Must use connector-based interface

The substitute part PD30ETPR60BPM5IO meets these criteria while offering enhanced output flexibility (Push-Pull, NPN/PNP) and active product status, making it a valid replacement for the obsolete PD30ETP60PAM5SA.

Parameter Comparison

Engineering Selection Recommendations

The PD30ETPR60BPM5IO is a direct substitute for the PD30ETP60PAM5SA based on matching critical electrical and mechanical parameters. Key advantages of the substitute include:

• Active Product Status: The substitute maintains current manufacturing and support status, eliminating obsolescence concerns associated with the original part.
• Enhanced Output Flexibility: The Push-Pull, NPN/PNP output configuration provides broader system integration options while maintaining backward compatibility with existing PNP-only designs.
• Improved Connector Specification: M8 connector designation provides standardized industrial interface compatibility.
• Extended Ingress Protection: IP67 rating addition complements the existing IP68 and IP69K ratings.
• Compliance Status: REACH Unaffected designation confirms regulatory compliance for the substitute part.

Both parts operate within identical electrical parameters (10V–30V supply, 500µs response time) and maintain equivalent sensing performance (retroreflective, polarized, 6m distance, red light source, -25°C to 60°C operating range).

Frequently Asked Questions (FAQ)

Q: Can PD30ETPR60BPM5IO directly replace PD30ETP60PAM5SA in existing installations?

A: Yes. Both sensors share identical sensing distance (6m), supply voltage range (10V–30V), response time (500µs), light source (red), and operating temperature range (-25°C to 60°C). The substitute's Push-Pull output configuration is compatible with PNP-only circuits when configured for PNP operation.

Q: What is the difference in light source wavelength between the two parts?

A: The main part operates at 625nm (red), while the substitute operates at 620nm (red). Both wavelengths fall within the red spectrum and are functionally equivalent for retroreflective polarized sensing applications.

Q: Does the M8 connector on the substitute part affect compatibility?

A: The M8 connector is a standardized industrial connector type. Compatibility depends on the existing connector interface in the installation. Mechanical adapter solutions may be required if the original connector type differs.

Q: Why is the substitute part listed as active while the original is obsolete?

A: Product status reflects current manufacturing availability. The substitute represents the current-generation equivalent from the same manufacturer, ensuring ongoing supply and technical support.

Q: Are there differences in ingress protection ratings?

A: The substitute adds IP67 rating to the existing IP68 and IP69K ratings of the original part. This provides additional environmental protection options without reducing the original protection levels.

Q: What output configuration should be selected on the substitute part for direct replacement?

A: Configure the PD30ETPR60BPM5IO for PNP output to maintain electrical compatibility with the original PD30ETP60PAM5SA circuit design.