PD30ETD10NAM5SA Equivalent & Substitute Parts

Part Overview

The PD30ETD10NAM5SA is a reflective, diffuse optical sensor manufactured by Carlo Gavazzi Inc., designed for detection applications requiring a 1-meter (39.370") sensing distance. This sensor operates with NPN output configuration and infrared light source (617nm), suitable for industrial automation and positioning tasks. The product is classified as obsolete, making identification of compatible substitute parts essential for system maintenance and new design implementations. Substitute parts must maintain equivalent sensing distance, voltage supply range, response time, and output characteristics to ensure functional compatibility.

Substiute Parts

PD30ETD10NAM5SA

Carlo Gavazzi Inc.In Stock: 1153PD30ETD10NAM5SA Datasheet

Current PartRFQ

PD30ETDR10BPM5IO

Carlo Gavazzi Inc.In Stock: 916PD30ETDR10BPM5IO Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PD30ETD10NAM5SA are identified based on the following critical parameters that determine functional equivalence:

• Sensing Distance: 39.37" (1m) — must match to maintain detection range
• Sensing Method: Reflective, Diffuse — optical detection principle must remain consistent
• Voltage Supply Range: 10V ~ 30V — power supply compatibility
• Response Time: 500µs — detection speed requirement
• Light Source Wavelength: 617nm (Red/Infrared spectrum) — optical characteristics
• Ingress Protection: IP67 or higher — environmental sealing requirement
• Operating Temperature Range: -25°C ~ 60°C — thermal operating envelope
• Connection Method: Connector-based interface — physical integration requirement

The substitute part PD30ETDR10BPM5IO meets these criteria while offering an active product status and enhanced output configuration flexibility (Push-Pull, NPN/PNP).

Parameter Comparison

Engineering Selection Recommendations

The PD30ETDR10BPM5IO is a direct functional substitute for the obsolete PD30ETD10NAM5SA. Both sensors share identical sensing distance, voltage supply range, response time, and operating temperature specifications. The substitute part maintains the same optical detection principle (reflective, diffuse) and wavelength (617nm).

Key advantages of the substitute part:

• Active Product Status: The PD30ETDR10BPM5IO is currently in active production, ensuring long-term availability and supply chain stability.
• Enhanced Output Configuration: Push-Pull output with NPN/PNP capability provides greater circuit design flexibility compared to the NPN-only configuration of the main part.
• Improved Connector Standard: M8 connector interface aligns with modern industrial sensor standards.
• Expanded Ingress Protection: IP67 rating addition provides broader environmental sealing options.
• REACH Compliance: The substitute part carries REACH Unaffected status, confirming regulatory compliance for European markets.

For applications currently using PD30ETD10NAM5SA, direct replacement with PD30ETDR10BPM5IO is supported. Circuit design modifications may be required if the original design specifically utilizes NPN-only output; however, the substitute's NPN/PNP capability accommodates both configurations.

Frequently Asked Questions (FAQ)

Q: Can PD30ETDR10BPM5IO directly replace PD30ETD10NAM5SA in existing installations?

A: Yes. Both sensors operate at identical sensing distance (1m), voltage supply (10V–30V), response time (500µs), and temperature range (-25°C to 60°C). The substitute part's Push-Pull output with NPN/PNP configuration is backward compatible with NPN-only circuit designs.

Q: What is the difference between the connector types?

A: The main part uses a generic connector interface, while the substitute specifies M8 connector standard. M8 is an industrial standard connector type that provides improved mechanical reliability and standardized mating cycles.

Q: Are there any output configuration considerations?

A: The main part provides NPN output only. The substitute offers Push-Pull output with selectable NPN/PNP configuration. Existing NPN circuits will function without modification. PNP capability is available for alternative circuit topologies if required.

Q: Does the light source wavelength difference affect substitution?

A: Both parts operate at 617nm wavelength within the red/infrared spectrum. This wavelength is identical in optical characteristics and detection performance for reflective, diffuse sensing applications.

Q: What is the significance of the product status change from Obsolete to Active?

A: Active product status ensures continued manufacturing, availability, and technical support. The substitute part is recommended for new designs and long-term system maintenance where supply continuity is required.

Q: Are there compliance or certification differences?

A: The substitute part carries REACH Unaffected status, confirming compliance with European chemical regulations. Both parts maintain equivalent ingress protection ratings (IP68, IP69K minimum).