PD30CNP06PPM5MU Equivalent & Substitute Parts

Part Overview

The PD30CNP06PPM5MU is a retroreflective, polarized optical sensor manufactured by Carlo Gavazzi Inc., designed for detection applications requiring a sensing distance of 236.2" (6m). This sensor features PNP output configuration with infrared light source (660nm) and operates across a supply voltage range of 10V to 30V. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance and component procurement.

Substiute Parts

PD30CNP06PPM5MU

Carlo Gavazzi Inc.In Stock: 803PD30CNP06PPM5MU Datasheet

Current PartRFQ

PD30CTPR60BPM5IO

Carlo Gavazzi Inc.In Stock: 783PD30CTPR60BPM5IO Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PD30CNP06PPM5MU is determined by the following critical parameters that must remain consistent or compatible:

• Sensing Method: Retroreflective, Polarized (core functional requirement)
• Sensing Distance: 236.2" (6m) or equivalent range
• Supply Voltage: 10V ~ 30V (must support this range)
• Response Time: 500µs (performance specification)
• Ingress Protection: IP67 (environmental sealing requirement)
• Connection Method: Connector-based interface

The substitute part PD30CTPR60BPM5IO maintains these critical parameters while introducing enhanced features including push-pull output configuration (compatible with PNP systems), active product status, and extended temperature range. The shift from infrared (660nm) to red light source (620nm) represents a wavelength variation within the same optical spectrum family, acceptable for retroreflective sensing applications.

Parameter Comparison

Engineering Selection Recommendations

The PD30CTPR60BPM5IO is a functionally equivalent substitute for the obsolete PD30CNP06PPM5MU based on the following engineering criteria:

• Both sensors maintain identical retroreflective, polarized sensing methodology and 6-meter detection range
• Supply voltage compatibility (10V ~ 30V) ensures direct integration into existing power architectures
• Response time specification (500µs) is preserved, maintaining system timing requirements
• IP67 ingress protection rating is consistent across both models
• The substitute part features active product status with current manufacturing support, addressing obsolescence concerns
• Push-pull output configuration of the substitute provides enhanced flexibility while remaining compatible with PNP-based control circuits
• Extended operating temperature range (-25°C ~ 60°C) of the substitute offers improved thermal performance margin

Frequently Asked Questions (FAQ)

Q: Can PD30CTPR60BPM5IO directly replace PD30CNP06PPM5MU in existing installations?

A: Yes. Both sensors share identical supply voltage range, response time, sensing distance, and ingress protection specifications. The push-pull output configuration of the substitute is compatible with PNP circuit requirements. Connector type compatibility (M8 on substitute) must be verified against existing wiring harnesses.

Q: What is the significance of the light source change from infrared (660nm) to red (620nm)?

A: Both wavelengths operate within the visible-to-near-infrared spectrum suitable for retroreflective polarized sensing. The wavelength difference does not affect the core sensing methodology or detection range for retroreflective applications.

Q: Why is the substitute part listed as active while the original is obsolete?

A: Product status reflects manufacturing availability and support lifecycle. The substitute represents the current generation equivalent within Carlo Gavazzi Inc.'s optical sensor product line, ensuring continued component availability and technical support.

Q: Are there temperature performance differences between these models?

A: The substitute part extends the upper operating temperature limit from 55°C to 60°C, providing a 5-degree margin improvement. Both models maintain the same lower temperature limit of -25°C.

Q: What connector specifications apply to each model?

A: The original part uses a generic connector interface. The substitute specifies M8 connector type, which is a standard industrial connector format. Mechanical compatibility with existing installation must be confirmed during integration planning.