PD30CND10PPDU Equivalent & Substitute Parts

Part Overview

The PD30CND10PPDU is a reflective diffuse optical sensor manufactured by Carlo Gavazzi Inc., designed for 1-meter (39.370") sensing distance applications. This sensor features PNP output configuration with red light source (660nm) and operates across a 10V to 30V supply voltage range. The product is classified as obsolete, making identification of compatible substitute parts essential for system maintenance and new design implementations where equivalent functionality is required.

Substiute Parts

PD30CND10PPDU

Carlo Gavazzi Inc.In Stock: 855PD30CND10PPDU Datasheet

Current PartRFQ

PD30CTDR10BPM5IO

Carlo Gavazzi Inc.In Stock: 784PD30CTDR10BPM5IO Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PD30CND10PPDU is determined by the following critical parameters:

• Sensing Method & Distance: Reflective, diffuse operation at 39.370" (1m) range
• Supply Voltage Compatibility: 10V ~ 30V operating range
• Response Time: 500µs switching speed
• Ingress Protection: IP67 rating for environmental sealing
• Operating Temperature Range: -25°C ~ 60°C
• Light Source Type: Red wavelength (660nm nominal)

The substitute part PD30CTDR10BPM5IO maintains these core functional parameters while offering enhanced features including push-pull output configuration (supporting both NPN and PNP modes), adjustable potentiometer-based sensing, and M8 connector interface. The substitute remains within the same product series (PD) and manufacturer ecosystem.

Parameter Comparison

Engineering Selection Recommendations

The PD30CTDR10BPM5IO serves as a direct functional substitute for the obsolete PD30CND10PPDU. Both sensors maintain identical core specifications for sensing distance, supply voltage range, response time, ingress protection rating, and operating temperature limits. The substitute part offers active product status, ensuring ongoing manufacturer support and availability.

The PD30CTDR10BPM5IO provides enhanced output flexibility through push-pull configuration supporting both NPN and PNP modes, accommodating diverse control circuit requirements. The M8 connector interface replaces the cable connection method, offering improved mechanical reliability and standardized industrial connectivity. Potentiometer-based adjustment provides field-configurable sensitivity compared to the teaching method of the original part.

Red light source wavelength differs slightly (617nm versus 660nm), remaining within the red spectrum range suitable for standard reflective sensing applications. This minor wavelength variation does not affect functional compatibility for typical diffuse reflective target detection.

Frequently Asked Questions (FAQ)

Q: Can the PD30CTDR10BPM5IO directly replace the PD30CND10PPDU in existing installations?

A: Yes, the substitute maintains identical sensing distance (1m), supply voltage range (10V–30V), response time (500µs), IP67 ingress protection, and operating temperature range (-25°C to 60°C). The push-pull output configuration supports PNP operation, ensuring signal compatibility. Connection method differs (M8 connector versus cable), requiring mechanical interface adaptation.

Q: What are the key differences between these two sensors?

A: Primary differences include product status (active versus obsolete), output configuration (push-pull NPN/PNP versus PNP only), connection interface (M8 connector versus cable), adjustment method (potentiometer versus teaching), and red light wavelength (617nm versus 660nm). Functional sensing parameters remain equivalent.

Q: Is the wavelength difference between 617nm and 660nm significant for substitution?

A: Both wavelengths fall within the red spectrum range used for reflective diffuse sensing. The 43nm difference does not affect compatibility for standard target detection applications. Specific reflective material properties may exhibit minor response variations, but functional substitution remains valid for typical industrial sensing scenarios.

Q: What connector type is used on the PD30CTDR10BPM5IO?

A: The substitute part uses an M8 connector interface, providing standardized industrial connectivity. This differs from the 2-meter cable connection on the original PD30CND10PPDU, requiring mechanical interface adaptation during installation.

Q: Are both sensors compliant with the same certifications?

A: Both parts carry identical ECCN (EAR99) and HTSUS (8541.49.8000) classifications. The substitute part includes REACH Unaffected status. Both maintain IEC 60529 IP67 ingress protection rating.