PD30CNB15PPM5RT Equivalent & Substitute Parts

Part Overview

The PD30CNB15PPM5RT is a reflective, diffuse optical sensor manufactured by Carlo Gavazzi Inc., designed for 150mm (5.906") sensing distance applications with PNP output configuration. This sensor operates across a 10V to 30V supply range and features infrared (660nm) light source technology with IP67 ingress protection rating.

The product is currently classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain system functionality, ensure supply chain continuity, and support ongoing maintenance and replacement requirements for existing installations.

Substiute Parts

PD30CNB15PPM5RT

Carlo Gavazzi Inc.In Stock: 855PD30CNB15PPM5RT Datasheet

Current PartRFQ

PD30CTBR20BPM5IO

Carlo Gavazzi Inc.In Stock: 995PD30CTBR20BPM5IO Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PD30CNB15PPM5RT is determined by the following critical parameters:

• Voltage Supply Compatibility: Supply voltage range must overlap or encompass 10V ~ 30V
• Output Configuration: PNP output is required for direct circuit compatibility
• Sensing Distance: Functional sensing distance must be adequate for the application (150mm reference)
• Ingress Protection: IP67 rating must be maintained for environmental protection
• Connection Method: Connector-based interface required
• Operating Temperature Range: Must support -25°C ~ 55°C minimum operating envelope

The substitute part PD30CTBR20BPM5IO is identified as a Carlo Gavazzi Inc. optical sensor within the same product series (PD). While this substitute employs background suppression sensing technology rather than reflective diffuse sensing, it maintains compatibility across voltage supply, connector interface, ingress protection, and operating temperature parameters. The substitute offers extended sensing distance (200mm) and dual output configuration capability (Push-Pull, NPN/PNP), providing operational flexibility for replacement scenarios.

Parameter Comparison

Engineering Selection Recommendations

The PD30CNB15PPM5RT is obsolete and no longer in active production. The PD30CTBR20BPM5IO is classified as active and available for procurement, making it the primary substitute option for replacement applications.

Both sensors maintain identical voltage supply specifications (10V ~ 30V) and IP67 ingress protection, ensuring compatibility with existing power distribution and environmental protection requirements. The substitute part supports PNP output configuration through its Push-Pull, NPN/PNP dual-output design, allowing direct integration into circuits designed for the original sensor.

The substitute sensor operates across an extended temperature range (-25°C ~ 60°C versus -25°C ~ 55°C), providing additional thermal margin. Response time increases from 500µs to 1ms; this parameter difference must be evaluated against specific application timing requirements.

Selection of the substitute part should be based on product availability, supply chain requirements, and application-specific sensing distance and response time tolerances.

Frequently Asked Questions (FAQ)

Q: Can the PD30CTBR20BPM5IO directly replace the PD30CNB15PPM5RT in existing circuits?

A: Direct replacement is possible for applications where the substitute's extended sensing distance (200mm versus 150mm) and increased response time (1ms versus 500µs) are acceptable. Both sensors support identical voltage supply ranges (10V ~ 30V) and maintain PNP output capability through the substitute's dual-output configuration. Connector interface compatibility must be verified for the specific installation.

Q: What is the primary difference between reflective diffuse sensing and background suppression sensing?

A: The main part uses reflective diffuse sensing, which detects objects based on light reflection from the target surface. The substitute uses background suppression sensing, which distinguishes between target objects and background surfaces at extended distances. This difference may affect performance in applications with reflective backgrounds or varying surface characteristics.

Q: Are there packaging differences between these sensors?

A: The main part packaging is not specified in available documentation. The substitute part is supplied in box packaging. Connector interface specifications should be verified; the substitute features M8 connector compatibility.

Q: Does the substitute part meet the same environmental protection standards?

A: Both sensors maintain IP67 ingress protection rating, ensuring equivalent environmental sealing and protection against dust and water ingress.

Q: What is the significance of the product status difference?

A: The main part is classified as obsolete and is no longer manufactured. The substitute part is active and available for procurement, ensuring long-term supply chain availability and support.