PCSB2/0-5S-4Y Equivalent & Substitute Parts

Part Overview

The PCSB2/0-5S-4Y is an inline tap connector terminal manufactured by Panduit Corp, designed for screw termination of conductors ranging from 2/0 to 14 AWG. This fully insulated terminal accommodates five wire entries and features a clear polycarbonate body. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal configuration.

Substiute Parts

PCSB2/0-5S-4Y

Panduit CorpIn Stock: 1101PCSB2/0-5S-4Y Datasheet

Current PartRFQ

PCSB2/0-4-6

Panduit CorpIn Stock: 763PCSB2/0-4-6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PCSB2/0-5S-4Y is limited by the following critical parameters that must remain constant:

Fixed Parameters (Non-Negotiable):

• Manufacturer: Panduit Corp
• Terminal Type: Inline, Tap
• Wire Gauge Range: 2/0-14 AWG
• Termination Method: Screw
• Insulation Type: Fully Insulated
• Color: Clear
• Regulatory Compliance: ROHS3 Compliant, REACH Affected

Variable Parameter (Allows Substitution):

• Number of Wire Entries: The PCSB2/0-5S-4Y features five wire entries. Substitute parts may feature a different number of wire entries if all other parameters remain aligned.

The PCSB2/0-4-6 qualifies as a substitute based on matching all fixed parameters while differing only in the number of wire entries (four entries versus five).

Parameter Comparison

Engineering Selection Recommendations

The PCSB2/0-4-6 is the active equivalent for the obsolete PCSB2/0-5S-4Y. Both terminals share identical electrical and mechanical specifications for wire gauge accommodation, termination methodology, and insulation characteristics. The primary distinction is the reduction from five wire entries to four wire entries in the substitute part.

Selection of the PCSB2/0-4-6 is supported by:

• Active product status ensuring ongoing availability and manufacturing support
• Full compliance with ROHS3 and REACH regulatory requirements
• Identical wire gauge range (2/0-14 AWG) and screw termination capability
• Matching insulation type and color specification
• Bulk packaging availability for production environments

The reduction in wire entry count must be evaluated against application requirements. Applications requiring exactly five simultaneous wire connections cannot use the four-entry substitute without circuit redesign.

Frequently Asked Questions (FAQ)

Q: Can the PCSB2/0-4-6 directly replace the PCSB2/0-5S-4Y in all applications?

A: The PCSB2/0-4-6 is electrically and mechanically compatible with the PCSB2/0-5S-4Y for wire gauge range, termination method, and insulation characteristics. However, the reduction from five wire entries to four wire entries requires evaluation of the specific circuit configuration. Applications requiring five simultaneous connections cannot use the four-entry substitute without modification.

Q: What is the significance of the wire gauge range 2/0-14 AWG?

A: This range indicates the terminal accommodates conductors from 2/0 AWG (approximately 67.4 mm²) down to 14 AWG (approximately 2.08 mm²). Both the main part and substitute maintain this identical range, ensuring compatibility across the full spectrum of conductor sizes.

Q: Are there regulatory compliance differences between the main part and substitute?

A: No. Both the PCSB2/0-5S-4Y and PCSB2/0-4-6 are ROHS3 Compliant and REACH Affected. Regulatory status is identical between the two parts.

Q: Why is the PCSB2/0-5S-4Y classified as obsolete?

A: Product status reflects Panduit Corp's manufacturing and support decisions. The obsolete designation indicates the part is no longer in active production. The PCSB2/0-4-6 represents the active alternative within the PCSB series.

Q: Does packaging differ between these parts?

A: The PCSB2/0-5S-4Y packaging is not specified in available documentation. The PCSB2/0-4-6 is supplied in bulk packaging, suitable for production and high-volume applications.

Q: What is the base product number significance?

A: Both parts share the base product number PCS, indicating they belong to the same terminal family within the Panduit product line. This common heritage supports functional and dimensional compatibility within the series.