PCJ0E152MCL6GS Equivalent & Substitute Parts

Part Overview

The PCJ0E152MCL6GS is a 1500 µF, 2.5 V aluminum polymer capacitor manufactured by Nichicon in the PCJ series. This surface mount component is designed for general purpose applications requiring stable capacitance and low equivalent series resistance. The part is currently active in production with ROHS3 compliance and REACH affected status. Substitute parts may be required due to inventory constraints, supply chain disruptions, or specific application requirements where alternative electrical or mechanical characteristics are acceptable within design tolerances.

Substiute Parts

PCJ0E152MCL6GS

NichiconIn Stock: 1182PCJ0E152MCL6GS Datasheet

Current PartRFQ

PCF0E152MCL9GS

NichiconIn Stock: 1642PCF0E152MCL9GS Datasheet

SimilarRFQ

A765KN158M0ELAE010

KEMETIn Stock: 3641A765KN158M0ELAE010 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the PCJ0E152MCL6GS is determined by strict equivalence in the following critical parameters: capacitance (1500 µF), voltage rating (2.5 V), component type (aluminum polymer), operating temperature range (-55°C ~ 105°C), lifetime rating (2000 Hrs @ 105°C), mounting type (surface mount), and package configuration (radial, can - SMD). Variations in ESR, ripple current capability, and physical dimensions are permitted within the constraints of PCB layout and thermal management requirements. All substitute parts must maintain ROHS3 compliance and be rated for general purpose applications.

Parameter Comparison

Engineering Selection Recommendations

PCJ0E152MCL6GS and A765KN158M0ELAE010 are parametric equivalents with identical physical dimensions (8.00mm diameter, 10.00mm height), matching ESR (10 mOhm), and identical land size footprints (8.30mm x 8.30mm). Both parts maintain ROHS3 compliance and support the same operating temperature range and lifetime rating. Selection between these two parts depends on manufacturer preference and supply availability.

PCF0E152MCL9GS is a similar substitute with identical electrical specifications (1500 µF, 2.5 V, 2000 Hrs @ 105°C) but features a larger physical footprint (10.00mm diameter, 12.70mm height) and increased ESR (12 mOhm). This part is suitable only for applications where PCB layout accommodates the larger dimensions and where the 2 mOhm ESR increase does not impact thermal or ripple current performance. The PCF0E152MCL9GS offers higher ripple current capability (5.44 A @ 100 kHz) compared to the main part (5.22 A @ 100 kHz).

All three parts are active products with current manufacturing status and full compliance certifications. Selection should be based on PCB space constraints, thermal requirements, and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can PCF0E152MCL9GS be used as a direct replacement for PCJ0E152MCL6GS?

A: PCF0E152MCL9GS is electrically equivalent but physically larger. Direct replacement requires PCB layout modification to accommodate the increased dimensions (10.00mm diameter vs. 8.00mm, 12.70mm height vs. 10.00mm) and larger land size footprint (10.30mm x 10.30mm vs. 8.30mm x 8.30mm). The 2 mOhm ESR increase must be evaluated for thermal and ripple current performance in the specific application.

Q: Is A765KN158M0ELAE010 a drop-in replacement for PCJ0E152MCL6GS?

A: Yes. A765KN158M0ELAE010 is a parametric equivalent with identical physical dimensions, ESR, and electrical ratings. The part requires no PCB layout modifications and is suitable for direct substitution. The primary difference is the manufacturer (KEMET vs. Nichicon).

Q: What are the key differences between the three parts?

A: PCJ0E152MCL6GS and A765KN158M0ELAE010 are physically and electrically identical with 10 mOhm ESR. PCF0E152MCL9GS is larger (10.00mm vs. 8.00mm diameter) with 12 mOhm ESR but offers higher ripple current capability (5.44 A vs. 5.22 A @ 100 kHz). All three maintain identical capacitance, voltage rating, temperature range, and lifetime specifications.

Q: Are all three parts RoHS compliant?

A: Yes. PCJ0E152MCL6GS, PCF0E152MCL9GS, and A765KN158M0ELAE010 are all ROHS3 compliant. A765KN158M0ELAE010 has REACH Unaffected status, while the Nichicon parts (PCJ0E152MCL6GS and PCF0E152MCL9GS) have REACH Affected status.

Q: What is the impact of ESR differences on circuit performance?

A: ESR affects impedance and thermal dissipation. PCJ0E152MCL6GS and A765KN158M0ELAE010 both feature 10 mOhm ESR. PCF0E152MCL9GS has 12 mOhm ESR, resulting in slightly higher impedance and thermal dissipation. For applications sensitive to ESR, PCJ0E152MCL6GS or A765KN158M0ELAE010 are preferred.

Q: Can PCJ0E152MCL6GS be used in high-frequency ripple current applications?

A: PCJ0E152MCL6GS supports 5.22 A ripple current @ 100 kHz. Application suitability depends on specific circuit requirements. PCF0E152MCL9GS offers higher ripple current capability (5.44 A @ 100 kHz) if increased margin is required.