PCF14JT910R Equivalent & Substitute Parts

Part Overview

The PCF14JT910R is a 910 Ohms ±5% 0.25W through-hole resistor manufactured by Stackpole Electronics Inc in the CF series. This carbon film resistor features flame retardant coating and safety characteristics, designed for axial or radial bend configurations. The part is Active status and widely used in electronic assemblies requiring standard resistance values with moderate tolerance specifications. Substitute parts are identified to address packaging format variations and series alternatives while maintaining electrical and mechanical compatibility.

Substiute Parts

PCF14JT910R

Stackpole Electronics IncIn Stock: 788PCF14JT910R Datasheet

Current PartRFQ

CF14JT910R

Stackpole Electronics IncIn Stock: 12099CF14JT910R Datasheet

DirectRFQ

CFM14JT910R

Stackpole Electronics IncIn Stock: 5645CFM14JT910R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PCF14JT910R are qualified based on the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Resistance value: 910 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Carbon Film (exact match required)
• Temperature coefficient: 0 / -400ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)

Mechanical Compatibility Criteria:

• Package type: Axial configuration (primary criterion)
• Termination count: 2 terminations (exact match required)
• Compliance: ROHS3 Compliant, REACH Unaffected (exact match required)

Packaging Format Variations: Substitutes may differ in supplier packaging format (Tape & Reel vs. Cut Tape) and physical dimensions while maintaining electrical performance and axial lead configuration.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PCF14JT910R, CF14JT910R, and CFM14JT910R—are electrically and mechanically equivalent for 910 Ohm 1/4W carbon film resistor applications. Selection between these parts is determined by packaging and supply chain requirements rather than electrical performance.

PCF14JT910R is supplied in Tape & Reel format and supports both axial and radial bend configurations, suitable for automated assembly processes requiring bulk packaging.

CF14JT910R is supplied in Cut Tape format with standard axial configuration, appropriate for manual assembly or mixed-volume production environments.

CFM14JT910R is supplied in Cut Tape format with compact axial dimensions (0.067" Dia x 0.130" L), suitable for space-constrained applications or where smaller form factor is required.

All parts maintain Active product status, ROHS3 compliance, and REACH unaffected status, ensuring regulatory compatibility across applications.

Frequently Asked Questions (FAQ)

Q: Can CF14JT910R replace PCF14JT910R in production? A: Yes. Both parts are electrically identical 910 Ohm ±5% 1/4W carbon film resistors. The difference is packaging format: PCF14JT910R uses Tape & Reel while CF14JT910R uses Cut Tape. Compatibility depends on assembly equipment and supply chain requirements.

Q: What is the primary difference between CFM14JT910R and the other substitutes? A: CFM14JT910R is electrically equivalent but has a smaller physical size (0.067" Dia x 0.130" L versus 0.091" Dia x 0.236" L). This compact form factor is suitable for applications with space constraints. All electrical parameters remain identical.

Q: Are all three parts ROHS3 compliant? A: Yes. PCF14JT910R, CF14JT910R, and CFM14JT910R are all ROHS3 compliant and REACH unaffected, meeting regulatory requirements for restricted substance use.

Q: Can radial bend configuration be used with CF14JT910R or CFM14JT910R? A: CF14JT910R and CFM14JT910R are specified for axial configuration only. PCF14JT910R explicitly supports both axial and radial bend configurations. If radial bend is required, PCF14JT910R is the appropriate selection.

Q: What packaging format should be selected for high-volume automated assembly? A: PCF14JT910R in Tape & Reel format is optimized for automated pick-and-place assembly. CF14JT910R and CFM14JT910R in Cut Tape format are suitable for lower-volume or manual assembly processes.

Q: Are the temperature coefficients identical across all substitutes? A: Yes. All three parts have identical temperature coefficient specifications of 0 / -400ppm/°C and operating temperature range of -55°C to 155°C.