PCF14JT910K Equivalent & Substitute Parts

Part Overview

The PCF14JT910K is a 910 kOhms ±5% 0.25W through-hole resistor manufactured by Stackpole Electronics Inc. This carbon film resistor features flame retardant coating and safety characteristics, designed for axial or radial bend configurations in Tape & Reel packaging. The part maintains Active product status with full RoHS3 compliance and REACH unaffected designation. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and procurement optimization when the primary packaging format or inventory availability requires alternative sourcing.

Substiute Parts

PCF14JT910K

Stackpole Electronics IncIn Stock: 1046PCF14JT910K Datasheet

Current PartRFQ

CF14JT910K

Stackpole Electronics IncIn Stock: 28631CF14JT910K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PCF14JT910K are determined by strict equivalence across the following electrical and mechanical parameters:

• Resistance value: 910 kOhms
• Tolerance: ±5%
• Power rating: 0.25W (1/4W)
• Composition: Carbon Film
• Temperature coefficient: 0 / -850ppm/°C
• Operating temperature range: -55°C to 155°C
• Features: Flame Retardant Coating, Safety
• Termination count: 2
• Manufacturer: Stackpole Electronics Inc
• Series: CF
• Product status: Active
• Compliance: RoHS3 Compliant, REACH Unaffected

The primary distinction between the main part and substitute parts lies in packaging format. The PCF14JT910K is supplied in Tape & Reel (TR) configuration with Panasert supplier device packaging. Substitute parts may differ in packaging delivery method while maintaining identical electrical performance and physical dimensions.

Parameter Comparison

Engineering Selection Recommendations

Both PCF14JT910K and CF14JT910K are Active products from Stackpole Electronics Inc with identical electrical specifications and physical dimensions. Selection between these parts is determined by packaging and procurement requirements rather than functional performance.

The PCF14JT910K in Tape & Reel format is suitable for high-volume automated assembly operations. The CF14JT910K in Cut Tape format provides flexibility for lower-volume applications, prototype builds, or mixed-component procurement scenarios.

Both parts maintain full RoHS3 compliance and REACH unaffected status, ensuring regulatory alignment for applications subject to environmental and hazardous substance restrictions. Inventory availability and supply chain logistics should guide final part selection when electrical and mechanical requirements are equivalent.

Frequently Asked Questions (FAQ)

Q: Can CF14JT910K be used as a direct replacement for PCF14JT910K?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format: PCF14JT910K is supplied in Tape & Reel (TR) configuration, while CF14JT910K is supplied in Cut Tape (CT) configuration. Functional performance in the circuit is equivalent.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging delivers components on continuous tape wound on reels, optimized for automated pick-and-place assembly at high volumes. Cut Tape packaging provides individual tape segments, suitable for manual assembly, lower-volume production, or component-level procurement.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts measure 0.091" diameter by 0.236" length (2.30mm x 6.00mm). They are compatible with identical PCB footprints and mounting configurations.

Q: Do both parts meet the same compliance standards?

A: Yes. Both PCF14JT910K and CF14JT910K are RoHS3 compliant and REACH unaffected, meeting identical regulatory requirements for restricted substance use and environmental compliance.

Q: What determines substitutability for this resistor?

A: Substitutability is determined by resistance value (910 kOhms), tolerance (±5%), power rating (0.25W), composition (carbon film), temperature coefficient (0 / -850ppm/°C), operating temperature range (-55°C to 155°C), and physical dimensions. Packaging format does not affect electrical performance or circuit compatibility.