PCF14JT82R0 Equivalent & Substitute Parts

Part Overview

The PCF14JT82R0 is an 82 Ohms ±5% 0.25W through-hole resistor manufactured by Stackpole Electronics Inc in the CF series. This carbon film resistor features flame retardant coating and safety characteristics, designed for axial or radial bend configurations. The part is Active status and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Substitute parts are identified when equivalent electrical specifications and compliance certifications are maintained across alternative packaging formats or series variants.

Substiute Parts

PCF14JT82R0

Stackpole Electronics IncIn Stock: 1019PCF14JT82R0 Datasheet

Current PartRFQ

CF14JT82R0

Stackpole Electronics IncIn Stock: 89220CF14JT82R0 Datasheet

DirectRFQ

CFM14JT82R0

Stackpole Electronics IncIn Stock: 53192CFM14JT82R0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PCF14JT82R0 is determined by strict equivalence in the following electrical and compliance parameters:

• Resistance value: 82 Ohms
• Tolerance: ±5%
• Power rating: 0.25W (1/4W)
• Composition: Carbon Film
• Temperature coefficient: 0 / -400ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Flame retardant coating and safety features
• RoHS3 compliance
• REACH unaffected status
• Manufacturer: Stackpole Electronics Inc

Substitute parts may differ in packaging format (Tape & Reel versus Cut Tape) or series designation (CF versus CFM) while maintaining identical electrical performance and regulatory compliance. Physical dimensions may vary between series variants.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PCF14JT82R0, CF14JT82R0, and CFM14JT82R0—maintain Active product status and identical electrical specifications. Selection between these parts is determined by packaging and physical form factor requirements:

CF14JT82R0 is functionally equivalent to PCF14JT82R0 with identical dimensions but supplied in Cut Tape packaging instead of Tape & Reel format.

CFM14JT82R0 is electrically equivalent but features a smaller physical form factor (0.067" Dia x 0.130" L versus 0.091" Dia x 0.236" L). This series variant is suitable for space-constrained applications while maintaining all electrical and compliance specifications.

All parts carry ROHS3 compliance and REACH unaffected status, supporting regulatory requirements for modern electronic assemblies.

Frequently Asked Questions (FAQ)

Q: Can CF14JT82R0 replace PCF14JT82R0 in existing designs?

A: Yes. Both parts are electrically identical with matching resistance, tolerance, power rating, temperature coefficient, and operating range. The difference is packaging format: CF14JT82R0 is supplied in Cut Tape while PCF14JT82R0 is supplied in Tape & Reel. Physical dimensions are identical.

Q: What is the primary difference between CFM14JT82R0 and the other variants?

A: CFM14JT82R0 belongs to the CFM series and has a smaller physical form factor (0.067" Dia x 0.130" L compared to 0.091" Dia x 0.236" L). All electrical parameters remain equivalent. Use CFM14JT82R0 when board space is limited.

Q: Are all three parts RoHS and REACH compliant?

A: Yes. PCF14JT82R0, CF14JT82R0, and CFM14JT82R0 are all ROHS3 compliant and REACH unaffected, meeting regulatory requirements for electronic component use.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (Tape & Reel versus Cut Tape) is a supply and handling consideration only. Electrical performance is identical across all three parts.

Q: Can CFM14JT82R0 be used in applications designed for the standard CF series?

A: Yes, provided the smaller physical dimensions (0.067" Dia x 0.130" L) are compatible with the PCB layout and mechanical constraints. Electrical specifications are fully equivalent.