PCF14JT820R Equivalent & Substitute Parts

Part Overview

The PCF14JT820R is a 820 Ohms ±5% 0.25W through-hole resistor manufactured by Stackpole Electronics Inc in the CF series. This carbon film resistor features flame retardant coating and safety characteristics, designed for axial or radial bend configurations in Tape & Reel packaging. The part is Active status and widely used in electronic circuits requiring precision resistive elements. Substitute parts are identified to address packaging format availability, inventory requirements, or specific application constraints while maintaining electrical and mechanical compatibility.

Substiute Parts

PCF14JT820R

Stackpole Electronics IncIn Stock: 938PCF14JT820R Datasheet

Current PartRFQ

CF14JT820R

Stackpole Electronics IncIn Stock: 51511CF14JT820R Datasheet

DirectRFQ

CFM14JT820R

Stackpole Electronics IncIn Stock: 13962CFM14JT820R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for PCF14JT820R is determined by the following electrical and mechanical parameters:

Electrical parameters: Resistance value (820 Ohms), tolerance (±5%), power rating (0.25W), composition (carbon film), temperature coefficient (0 / -400ppm/°C), and operating temperature range (-55°C to 155°C) must remain constant across all substitutes.

Mechanical parameters: Package/case type (axial configuration), number of terminations (2), and physical dimensions must be compatible with the application circuit board layout.

Compliance parameters: RoHS3 compliance and REACH unaffected status must be maintained.

Packaging format differences (Tape & Reel versus Cut Tape) and physical size variations within the axial category are permitted substitution variables, provided all electrical specifications and compliance certifications remain unchanged.

Parameter Comparison

Engineering Selection Recommendations

CF14JT820R is a direct electrical equivalent to PCF14JT820R with identical electrical specifications and compliance certifications. The primary difference is packaging format: CF14JT820R is supplied in Cut Tape format rather than Tape & Reel. This substitute is suitable when Cut Tape packaging meets procurement and assembly requirements. Both parts maintain ROHS3 compliance and REACH unaffected status.

CFM14JT820R is a manufacturer-recommended substitute from the CFM series with identical electrical specifications and compliance certifications. Physical dimensions are reduced (0.067" Dia x 0.130" L versus 0.091" Dia x 0.236" L), resulting in a smaller form factor. This substitute is applicable when space constraints or miniaturization requirements are present in the circuit design. CFM14JT820R maintains ROHS3 compliance and REACH unaffected status.

All three parts are Active status products from Stackpole Electronics Inc, ensuring continued availability and manufacturing support.

Frequently Asked Questions (FAQ)

Q: Can CF14JT820R replace PCF14JT820R in my circuit?

A: Yes. CF14JT820R is electrically identical to PCF14JT820R with the same resistance (820 Ohms), tolerance (±5%), power rating (0.25W), temperature coefficient, and operating temperature range. The difference is packaging format: CF14JT820R uses Cut Tape instead of Tape & Reel. Physical dimensions are identical (0.091" Dia x 0.236" L). Verify that Cut Tape packaging is compatible with your assembly process.

Q: What is the difference between PCF14JT820R and CFM14JT820R?

A: Both parts have identical electrical specifications: 820 Ohms ±5%, 0.25W power rating, carbon film composition, and operating temperature range of -55°C to 155°C. The primary difference is physical size: CFM14JT820R is smaller (0.067" Dia x 0.130" L) compared to PCF14JT820R (0.091" Dia x 0.236" L). CFM14JT820R is suitable for applications requiring compact form factors. Both maintain ROHS3 compliance.

Q: Are all three parts ROHS3 compliant?

A: Yes. PCF14JT820R, CF14JT820R, and CFM14JT820R are all ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Can I use CFM14JT820R if my circuit board layout was designed for PCF14JT820R?

A: CFM14JT820R has different physical dimensions (smaller form factor). Verify that the reduced size (0.067" Dia x 0.130" L) is compatible with your circuit board layout, component spacing, and assembly equipment. Electrical performance is identical, but mechanical fit must be confirmed.

Q: What packaging formats are available for 820 Ohm ±5% 0.25W resistors from Stackpole?

A: PCF14JT820R is supplied in Tape & Reel format. CF14JT820R and CFM14JT820R are supplied in Cut Tape format. Select packaging based on your procurement volume, assembly process, and inventory management requirements.