PCF14JT62R0 Equivalent & Substitute Parts

Part Overview

The PCF14JT62R0 is a 62 Ohms ±5% 0.25W through-hole resistor manufactured by Stackpole Electronics Inc in the CF series. This carbon film resistor features flame retardant coating and safety characteristics, designed for axial or radial bend configurations. The part is Active status and widely used in electronic assemblies requiring standard resistance values with moderate tolerance specifications. Substitute parts are identified to address packaging format availability, inventory requirements, or specific application constraints while maintaining electrical and mechanical compatibility.

Substiute Parts

PCF14JT62R0

Stackpole Electronics IncIn Stock: 948PCF14JT62R0 Datasheet

Current PartRFQ

CF14JT62R0

Stackpole Electronics IncIn Stock: 33791CF14JT62R0 Datasheet

DirectRFQ

CFM14JT62R0

Stackpole Electronics IncIn Stock: 1181CFM14JT62R0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for PCF14JT62R0 is determined by the following electrical and mechanical parameters:

• Resistance value: 62 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Carbon Film (exact match required)
• Temperature coefficient: 0 / -400ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• Features: Flame Retardant Coating, Safety (exact match required)
• Compliance: ROHS3 Compliant, REACH Unaffected (exact match required)

Packaging format (Tape & Reel vs. Cut Tape) and physical dimensions may vary between substitute parts. The CF14JT62R0 and CFM14JT62R0 meet all electrical specifications and compliance requirements, making them functionally equivalent to the PCF14JT62R0 for circuit applications where the specified parameters are required.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PCF14JT62R0, CF14JT62R0, and CFM14JT62R0—are Active status products from Stackpole Electronics Inc and meet ROHS3 compliance and REACH unaffected requirements. Selection between these parts depends on packaging and dimensional requirements:

• PCF14JT62R0: Use when Tape & Reel packaging is required for automated assembly processes. Supports both axial and radial bend configurations.
• CF14JT62R0: Use when Cut Tape packaging is preferred. Maintains standard axial dimensions (0.091" Dia x 0.236" L).
• CFM14JT62R0: Use when space constraints require a smaller form factor. Reduced dimensions (0.067" Dia x 0.130" L) while maintaining all electrical specifications.

All parts satisfy identical electrical requirements: 62 Ohms ±5%, 0.25W power rating, carbon film composition, and -55°C to 155°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can CF14JT62R0 be used as a direct replacement for PCF14JT62R0?

A: Yes. Both parts have identical electrical specifications (62 Ohms ±5%, 0.25W, carbon film, -55°C to 155°C operating range) and compliance certifications. The primary difference is packaging format: PCF14JT62R0 is supplied in Tape & Reel, while CF14JT62R0 is supplied in Cut Tape. PCF14JT62R0 also supports radial bend configuration, whereas CF14JT62R0 is axial only.

Q: What are the dimensional differences between these parts?

A: PCF14JT62R0 and CF14JT62R0 share identical dimensions: 0.091" Dia x 0.236" L (2.30mm x 6.00mm). CFM14JT62R0 has reduced dimensions of 0.067" Dia x 0.130" L (1.70mm x 3.30mm) while maintaining all electrical specifications.

Q: Are all three parts ROHS3 compliant?

A: Yes. PCF14JT62R0, CF14JT62R0, and CFM14JT62R0 are all ROHS3 compliant and REACH unaffected.

Q: Which part should be selected for automated assembly?

A: PCF14JT62R0 in Tape & Reel packaging is optimized for automated pick-and-place assembly processes.

Q: Can CFM14JT62R0 be used in applications with space constraints?

A: Yes. CFM14JT62R0 provides the same electrical performance as PCF14JT62R0 and CF14JT62R0 in a smaller physical form factor, making it suitable for compact circuit designs.