PCF14JT62K0 Equivalent & Substitute Parts

Part Overview

The PCF14JT62K0 is a 62 kOhms ±5% 0.25W carbon film through-hole resistor manufactured by Stackpole Electronics Inc. This component is packaged in Tape & Reel (TR) format with axial and radial bend configurations. The part is Active in product status and meets ROHS3 compliance requirements. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity when the primary part number becomes unavailable or when alternative packaging formats are required for specific assembly processes.

Substiute Parts

PCF14JT62K0

Stackpole Electronics IncIn Stock: 1017PCF14JT62K0 Datasheet

Current PartRFQ

CF14JT62K0

Stackpole Electronics IncIn Stock: 23322CF14JT62K0 Datasheet

DirectRFQ

CFM14JT62K0

Stackpole Electronics IncIn Stock: 5934CFM14JT62K0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PCF14JT62K0 is determined by the following electrical and mechanical parameters:

Electrical Parameters (Must Match):

• Resistance value: 62 kOhms
• Tolerance: ±5%
• Power rating: 0.25W (1/4W)
• Composition: Carbon Film
• Temperature coefficient: 0 / -500ppm/°C
• Operating temperature range: -55°C to 155°C

Mechanical Parameters (Must Match):

• Package type: Axial configuration
• Number of terminations: 2
• Physical dimensions: 0.091" Dia x 0.236" L (2.30mm x 6.00mm) for standard axial; 0.067" Dia x 0.130" L (1.70mm x 3.30mm) for compact axial

Compliance Parameters (Must Match):

• RoHS3 Compliant
• REACH Unaffected
• ECCN: EAR99
• HTSUS: 8533.10.0065

Packaging format variations (Tape & Reel, Cut Tape) do not affect electrical or mechanical compatibility and are considered acceptable substitutes for component selection purposes.

Parameter Comparison

Engineering Selection Recommendations

CF14JT62K0 is a direct electrical and mechanical equivalent to PCF14JT62K0. Both parts share identical electrical specifications, physical dimensions, and compliance certifications. The primary difference is packaging format: CF14JT62K0 is supplied in Cut Tape (CT) format versus Tape & Reel (TR) for the main part. This substitute is suitable for applications where Cut Tape packaging is compatible with assembly processes. Inventory availability for CF14JT62K0 is significantly higher (23,304 pcs) compared to PCF14JT62K0 (986 pcs).

CFM14JT62K0 is a manufacturer-recommended substitute from the CFM series. All electrical parameters, compliance certifications, and operating characteristics are identical to PCF14JT62K0. The CFM14JT62K0 features a compact axial package with reduced physical dimensions (0.067" Dia x 0.130" L versus 0.091" Dia x 0.236" L). This substitute is applicable for space-constrained designs or applications requiring miniaturized component footprints. CFM14JT62K0 inventory is available at 5,853 pcs.

Both substitute parts maintain Active product status and full ROHS3 and REACH compliance. Selection between CF14JT62K0 and CFM14JT62K0 depends on packaging format requirements and physical space constraints within the target application.

Frequently Asked Questions (FAQ)

Q: Can CF14JT62K0 be used as a direct replacement for PCF14JT62K0?

A: Yes. CF14JT62K0 is electrically and mechanically equivalent. Both parts have identical resistance (62 kOhms), tolerance (±5%), power rating (0.25W), composition (carbon film), temperature coefficient, and operating temperature range. Physical dimensions are identical. The difference is packaging format: CF14JT62K0 uses Cut Tape (CT) while PCF14JT62K0 uses Tape & Reel (TR). Compatibility depends on assembly equipment compatibility with Cut Tape format.

Q: What are the differences between CF14JT62K0 and CFM14JT62K0?

A: Both parts are electrically identical with matching resistance, tolerance, power rating, and operating specifications. The primary difference is physical size. CF14JT62K0 measures 0.091" Dia x 0.236" L (2.30mm x 6.00mm), while CFM14JT62K0 measures 0.067" Dia x 0.130" L (1.70mm x 3.30mm). CFM14JT62K0 is a compact variant suitable for space-constrained applications. Both are supplied in Cut Tape (CT) format.

Q: Are all three parts RoHS and REACH compliant?

A: Yes. PCF14JT62K0, CF14JT62K0, and CFM14JT62K0 are all ROHS3 Compliant and REACH Unaffected. All three parts meet the same environmental and regulatory requirements.

Q: Which substitute should I select for a new design?

A: Selection depends on specific application requirements. If standard axial package dimensions are acceptable and Cut Tape packaging is compatible with assembly processes, CF14JT62K0 offers higher inventory availability. If space constraints require a compact footprint, CFM14JT62K0 is the appropriate choice. Both are Active products with full compliance certifications.

Q: Can these parts be used interchangeably on the same PCB?

A: CF14JT62K0 and PCF14JT62K0 can be used interchangeably on the same PCB due to identical physical dimensions. CFM14JT62K0 has a smaller footprint and cannot be used interchangeably without PCB layout modification, as the component body dimensions differ.

Q: What is the temperature operating range for all substitute parts?

A: All three parts operate across the same temperature range: -55°C to 155°C. Temperature coefficient is 0 / -500ppm/°C for all variants.