PCF14JT30R0 Equivalent & Substitute Parts

Part Overview

The PCF14JT30R0 is a 30 Ohm ±5% 0.25W through-hole resistor manufactured by Stackpole Electronics Inc in the CF series. This carbon film resistor features flame retardant coating and safety characteristics, designed for axial or radial bend configurations in Tape & Reel packaging. The part maintains Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility allow direct functional replacement in circuit applications.

Substiute Parts

PCF14JT30R0

Stackpole Electronics IncIn Stock: 693PCF14JT30R0 Datasheet

Current PartRFQ

CF14JT30R0

Stackpole Electronics IncIn Stock: 161781CF14JT30R0 Datasheet

DirectRFQ

CFM14JT30R0

Stackpole Electronics IncIn Stock: 1213CFM14JT30R0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PCF14JT30R0 are qualified based on the following electrical and mechanical parameters:

• Resistance value: 30 Ohms
• Tolerance: ±5%
• Power rating: 0.25W (1/4W)
• Composition: Carbon Film
• Temperature coefficient: 0 / -400ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Features: Flame Retardant Coating, Safety
• RoHS and REACH compliance status

Packaging format differences (Tape & Reel versus Cut Tape) and physical dimensions do not affect electrical equivalency. The CF14JT30R0 and CFM14JT30R0 maintain identical electrical specifications and environmental compliance ratings, qualifying them as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PCF14JT30R0, CF14JT30R0, and CFM14JT30R0—are Active status products from Stackpole Electronics Inc with identical electrical specifications and full compliance with ROHS3 and REACH requirements. Selection between these parts is determined by packaging and form factor requirements rather than electrical performance.

The PCF14JT30R0 in Tape & Reel format is suitable for high-volume automated assembly processes. The CF14JT30R0 in Cut Tape format provides flexibility for lower-volume or mixed-component applications. The CFM14JT30R0, also in Cut Tape format, offers a smaller physical footprint (0.067" Dia x 0.130" L versus 0.091" Dia x 0.236" L) while maintaining identical electrical performance, making it applicable to space-constrained circuit designs.

Frequently Asked Questions (FAQ)

Q: Can CF14JT30R0 replace PCF14JT30R0 in production?

A: Yes. Both parts share identical electrical specifications (30 Ohms ±5%, 0.25W, carbon film composition, temperature coefficient, and operating range). The difference is packaging format: PCF14JT30R0 is supplied in Tape & Reel while CF14JT30R0 is supplied in Cut Tape. Electrical performance and compliance are equivalent.

Q: What is the physical size difference between CFM14JT30R0 and the other parts?

A: CFM14JT30R0 has a smaller axial package dimension of 0.067" Dia x 0.130" L (1.70mm x 3.30mm), compared to 0.091" Dia x 0.236" L (2.30mm x 6.00mm) for PCF14JT30R0 and CF14JT30R0. All three maintain identical electrical specifications.

Q: Are all three parts ROHS3 and REACH compliant?

A: Yes. PCF14JT30R0, CF14JT30R0, and CFM14JT30R0 are all ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Which part should I select for automated assembly?

A: PCF14JT30R0 in Tape & Reel packaging is optimized for automated pick-and-place assembly. CF14JT30R0 and CFM14JT30R0 in Cut Tape format are suitable for manual or semi-automated processes.

Q: Can CFM14JT30R0 be used in space-constrained applications?

A: Yes. CFM14JT30R0 provides the same electrical performance as PCF14JT30R0 and CF14JT30R0 in a smaller physical package, making it suitable for compact circuit board layouts where space is limited.