PCF14JT2R00 Equivalent & Substitute Parts

Part Overview

The PCF14JT2R00 is a 2 Ohms ±5% 0.25W through hole resistor manufactured by Stackpole Electronics Inc. This carbon film resistor features flame retardant coating and safety characteristics, designed for axial and radial bend configurations. The part is currently active in production with ROHS3 compliance and REACH unaffected status. Substitute parts are identified to address packaging format variations, inventory availability, and dimensional specifications while maintaining electrical performance equivalence.

Substiute Parts

PCF14JT2R00

Stackpole Electronics IncIn Stock: 1155PCF14JT2R00 Datasheet

Current PartRFQ

CF14JT2R00

Stackpole Electronics IncIn Stock: 1102CF14JT2R00 Datasheet

DirectRFQ

CFM14JT2R00

Stackpole Electronics IncIn Stock: 17186CFM14JT2R00 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PCF14JT2R00 are qualified based on the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Resistance value: 2 Ohms
• Tolerance: ±5%
• Power rating: 0.25W (1/4W)
• Composition: Carbon Film
• Temperature coefficient: ±400ppm/°C
• Operating temperature range: -55°C to 155°C

Mechanical and Packaging Variations:

• Package/Case format: Axial configuration
• Supplier device package: Axial or Panasert
• Packaging type: Tape & Reel (TR) or Cut Tape (CT)
• Physical dimensions: Variations permitted within axial resistor standards

Compliance Requirements:

• RoHS3 Compliant
• REACH Unaffected status

Substitutes CF14JT2R00 and CFM14JT2R00 meet all electrical specifications and compliance requirements while differing in packaging format and physical dimensions.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PCF14JT2R00, CF14JT2R00, and CFM14JT2R00—are active production components from Stackpole Electronics Inc with identical electrical specifications and full compliance certifications (ROHS3 and REACH Unaffected).

PCF14JT2R00 supports both axial and radial bend configurations in Tape & Reel packaging with standard axial dimensions (2.30mm x 6.00mm).

CF14JT2R00 is a direct axial configuration variant in Tape & Reel packaging, maintaining identical dimensions to the main part.

CFM14JT2R00 is the manufacturer-recommended substitute, available in Cut Tape packaging with reduced physical dimensions (1.70mm x 3.30mm). This variant is suitable for applications requiring compact form factors or cut tape distribution formats. Inventory availability for CFM14JT2R00 is significantly higher (17,131 pcs) compared to the main part (1,084 pcs) and CF14JT2R00 (993 pcs).

Selection between these parts depends on packaging format requirements (Tape & Reel versus Cut Tape), physical space constraints, and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can CF14JT2R00 be used as a direct replacement for PCF14JT2R00?

A: Yes. Both parts share identical electrical specifications (2 Ohms ±5%, 0.25W, carbon film composition, ±400ppm/°C temperature coefficient, -55°C to 155°C operating range) and compliance status (ROHS3, REACH Unaffected). The primary difference is package configuration: PCF14JT2R00 supports axial and radial bend, while CF14JT2R00 is axial only. Physical dimensions are identical.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, suitable for automated assembly processes. Cut Tape packaging provides components on cut segments of carrier tape, typically for lower-volume applications or manual assembly. Both formats contain the same component; the difference is distribution and handling method.

Q: Can CFM14JT2R00 be used in place of PCF14JT2R00 despite smaller physical dimensions?

A: Electrical substitution is valid; CFM14JT2R00 meets all electrical requirements. However, physical dimensions differ (1.70mm x 3.30mm versus 2.30mm x 6.00mm). Verify that the smaller form factor is compatible with your PCB layout, component spacing, and mechanical assembly requirements before substitution.

Q: Are all three parts ROHS3 compliant?

A: Yes. PCF14JT2R00, CF14JT2R00, and CFM14JT2R00 are all ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Which substitute part has the best inventory availability?

A: CFM14JT2R00 has the highest inventory level at 17,131 pcs. CF14JT2R00 has 993 pcs, and PCF14JT2R00 has 1,084 pcs in stock.