PCF14JT2M70 Equivalent & Substitute Parts

Part Overview

The PCF14JT2M70 is a 2.7 MOhms ±5% 0.25W carbon film through-hole resistor manufactured by Stackpole Electronics Inc. This component is designed for general-purpose electronic applications requiring high-resistance values with standard tolerance and power dissipation characteristics. The part is currently in active production status with full RoHS3 compliance and REACH unaffected certification. Substitute parts are identified when packaging format changes are acceptable while maintaining identical electrical specifications and performance characteristics.

Substiute Parts

PCF14JT2M70

Stackpole Electronics IncIn Stock: 986PCF14JT2M70 Datasheet

Current PartRFQ

CF14JT2M70

Stackpole Electronics IncIn Stock: 13287CF14JT2M70 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PCF14JT2M70 is determined by strict equivalence in the following electrical and mechanical parameters:

• Resistance value: 2.7 MOhms
• Tolerance: ±5%
• Power rating: 0.25W (1/4W)
• Composition: Carbon Film
• Temperature coefficient: 0 / -1500ppm/°C
• Operating temperature range: -55°C to 155°C
• Manufacturer: Stackpole Electronics Inc
• Series: CF
• Product status: Active
• Compliance certifications: RoHS3 Compliant, REACH Unaffected

The primary difference between the main part and its substitute is the packaging format. The PCF14JT2M70 is supplied in Tape & Reel (TR) format with Panasert packaging, while the substitute CF14JT2M70 is supplied in Cut Tape (CT) format with Axial packaging. Both parts share identical physical dimensions (0.091" Dia x 0.236" L / 2.30mm x 6.00mm) and electrical characteristics, making them functionally interchangeable in applications where packaging format does not impose supply chain or assembly constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the PCF14JT2M70 and CF14JT2M70 are active production components from Stackpole Electronics Inc with full RoHS3 compliance and REACH unaffected certification. Selection between these parts should be based on supply chain requirements and assembly process compatibility. The Tape & Reel format of the PCF14JT2M70 is suitable for high-volume automated assembly operations, while the Cut Tape format of the CF14JT2M70 accommodates lower-volume production runs or manual assembly workflows. Both parts deliver identical electrical performance and environmental compliance across the specified operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can CF14JT2M70 be used as a direct replacement for PCF14JT2M70?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format: PCF14JT2M70 is supplied in Tape & Reel format, while CF14JT2M70 is supplied in Cut Tape format. Selection depends on assembly process requirements, not component performance.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts share identical resistance (2.7 MOhms), tolerance (±5%), power rating (0.25W), temperature coefficient (0 / -1500ppm/°C), and operating temperature range (-55°C to 155°C).

Q: What is the significance of the packaging format difference?

A: Packaging format affects supply chain logistics and assembly automation compatibility. Tape & Reel format is optimized for high-speed automated pick-and-place assembly. Cut Tape format is suitable for lower-volume production or manual assembly. Both formats contain identical components.

Q: Do both parts meet the same compliance standards?

A: Yes. Both PCF14JT2M70 and CF14JT2M70 are RoHS3 compliant and REACH unaffected, meeting identical regulatory requirements.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical dimensions of 0.091" Dia x 0.236" L (2.30mm x 6.00mm) and are suitable for the same PCB footprints and through-hole mounting applications.