PCF14JT2M20 Equivalent & Substitute Parts

Part Overview

The PCF14JT2M20 is a 2.2 MOhms ±5% 0.25W carbon film through-hole resistor manufactured by Stackpole Electronics Inc. This component is classified as Active product status and is designed for general-purpose electronic applications requiring precision resistive elements. The part is packaged in Tape & Reel (TR) format with axial and radial bend configurations. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility allow direct replacement in circuit designs, particularly when packaging format or lead configuration differences do not impact board-level assembly or performance requirements.

Substiute Parts

PCF14JT2M20

Stackpole Electronics IncIn Stock: 862PCF14JT2M20 Datasheet

Current PartRFQ

CF14JT2M20

Stackpole Electronics IncIn Stock: 93148CF14JT2M20 Datasheet

DirectRFQ

CFM14JT2M20

Stackpole Electronics IncIn Stock: 10849CFM14JT2M20 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PCF14JT2M20 is determined by strict equivalence across the following critical parameters: resistance value (2.2 MOhms), tolerance (±5%), power rating (0.25W), composition (carbon film), temperature coefficient (0 / -1500ppm/°C), operating temperature range (-55°C to 155°C), and compliance certifications (ROHS3, REACH Unaffected). Packaging format differences (Tape & Reel versus Cut Tape) and physical dimensions do not affect electrical performance or functional compatibility. The identified substitute parts maintain identical electrical specifications and regulatory compliance, differing only in packaging delivery method and physical form factor.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PCF14JT2M20, CF14JT2M20, and CFM14JT2M20—maintain identical electrical performance specifications and regulatory compliance status. Selection between these parts should be based on procurement requirements and assembly methodology. The PCF14JT2M20 in Tape & Reel packaging is suitable for high-volume automated assembly operations. The CF14JT2M20 in Cut Tape packaging provides flexibility for mixed-volume production runs. The CFM14JT2M20, also in Cut Tape format, represents the manufacturer-recommended variant within the CFM series. All parts are Active status products manufactured by Stackpole Electronics Inc and carry ROHS3 compliance and REACH Unaffected designation, meeting current regulatory requirements for electronic component deployment.

Frequently Asked Questions (FAQ)

Q: Can CF14JT2M20 be used as a direct replacement for PCF14JT2M20? A: Yes. Both parts share identical electrical specifications: 2.2 MOhms resistance, ±5% tolerance, 0.25W power rating, carbon film composition, and operating temperature range of -55°C to 155°C. The difference is packaging format (Cut Tape versus Tape & Reel), which does not affect circuit performance.

Q: What is the difference between PCF14JT2M20 and CFM14JT2M20? A: Electrical specifications are identical across resistance, tolerance, power rating, temperature coefficient, and operating range. The CFM14JT2M20 belongs to the CFM series and features a smaller physical form factor (0.067" Dia x 0.130" L versus 0.091" Dia x 0.236" L). Both are packaged in Cut Tape format. Physical dimensions may impact board layout considerations but do not affect electrical compatibility.

Q: Are all three parts RoHS and REACH compliant? A: Yes. PCF14JT2M20, CF14JT2M20, and CFM14JT2M20 are all ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory standards for electronic component manufacturing and deployment.

Q: Which part should be selected for automated assembly? A: PCF14JT2M20 in Tape & Reel packaging is optimized for high-volume automated pick-and-place assembly operations. CF14JT2M20 and CFM14JT2M20 in Cut Tape packaging are suitable for manual assembly or lower-volume production environments.

Q: Do packaging differences affect electrical performance? A: No. Packaging format (Tape & Reel or Cut Tape) is a logistics and assembly consideration only. All three parts deliver identical electrical performance in circuit applications.