PCF14JT2M00 Equivalent & Substitute Parts

Part Overview

The PCF14JT2M00 is a 2 MOhms ±5% 0.25W carbon film through-hole resistor manufactured by Stackpole Electronics Inc. This component is part of the CF series and features flame retardant coating with safety characteristics. The part is currently active in production with ROHS3 compliance and REACH unaffected status. Substitute parts are identified when packaging formats differ or when equivalent performance specifications are maintained across alternative part numbers within the same manufacturer's product line.

Substiute Parts

PCF14JT2M00

Stackpole Electronics IncIn Stock: 817PCF14JT2M00 Datasheet

Current PartRFQ

CF14JT2M00

Stackpole Electronics IncIn Stock: 72785CF14JT2M00 Datasheet

DirectRFQ

CFM14JT2M00

Stackpole Electronics IncIn Stock: 12369CFM14JT2M00 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PCF14JT2M00 is determined by the following critical parameters: resistance value (2 MOhms), tolerance (±5%), power rating (0.25W), composition (carbon film), temperature coefficient (0 / -1500ppm/°C), and operating temperature range (-55°C to 155°C). All substitute parts must maintain identical electrical specifications across these parameters. Packaging format differences (Tape & Reel versus Cut Tape) and physical dimensions do not affect electrical equivalency when the core performance characteristics remain unchanged. Compliance certifications (ROHS3, REACH) must be maintained across all substitutes.

Parameter Comparison

Engineering Selection Recommendations

All three part numbers—PCF14JT2M00, CF14JT2M00, and CFM14JT2M00—are electrically equivalent and maintain identical performance specifications for resistance, tolerance, power rating, and temperature characteristics. Selection between these parts is determined by packaging requirements and availability. The PCF14JT2M00 is supplied in Tape & Reel format, while CF14JT2M00 and CFM14JT2M00 are supplied in Cut Tape format. All parts maintain active product status and full compliance with ROHS3 and REACH requirements. Physical dimension differences between the CF and CFM series do not affect electrical performance but may impact board layout considerations.

Frequently Asked Questions (FAQ)

Q: Can CF14JT2M00 replace PCF14JT2M00 in production applications? A: Yes. Both parts are electrically identical with matching resistance, tolerance, power rating, and temperature specifications. The difference is packaging format: PCF14JT2M00 uses Tape & Reel while CF14JT2M00 uses Cut Tape. Selection depends on assembly process requirements.

Q: What is the difference between CF14JT2M00 and CFM14JT2M00? A: Both parts have identical electrical specifications. The CFM14JT2M00 belongs to the CFM series and has smaller physical dimensions (0.067" Dia x 0.130" L) compared to the CF series (0.091" Dia x 0.236" L). Electrical performance is equivalent; physical size differences may affect PCB layout.

Q: Are all three parts ROHS3 compliant? A: Yes. PCF14JT2M00, CF14JT2M00, and CFM14JT2M00 are all ROHS3 compliant and REACH unaffected.

Q: Which part should I select for high-volume production? A: Selection is based on packaging and assembly equipment compatibility. CF14JT2M00 and CFM14JT2M00 in Cut Tape format are typically preferred for automated assembly. Availability and lead time should also be considered in the selection process.

Q: Do physical dimension differences affect circuit performance? A: No. Physical dimensions do not affect electrical performance. All three parts deliver identical resistance, tolerance, power rating, and temperature coefficient specifications. Dimension differences are relevant only for PCB layout and mechanical fit considerations.