PCF14JT2K00 Equivalent & Substitute Parts

Part Overview

The PCF14JT2K00 is a 2 kOhms ±5% 0.25W through-hole resistor manufactured by Stackpole Electronics Inc. This carbon film resistor features flame retardant coating and safety characteristics, designed for general-purpose applications requiring reliable performance across industrial temperature ranges. The part is Active status and ROHS3 compliant. Substitute parts may be required due to inventory availability, lead time constraints, or specific packaging requirements for board assembly processes.

Substiute Parts

PCF14JT2K00

Stackpole Electronics IncIn Stock: 2090PCF14JT2K00 Datasheet

Current PartRFQ

CF14JT2K00

Stackpole Electronics IncIn Stock: 9472CF14JT2K00 Datasheet

DirectRFQ

CFM14JT2K00

Stackpole Electronics IncIn Stock: 23029CFM14JT2K00 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the PCF14JT2K00 is determined by strict equivalence across the following electrical and mechanical parameters:

• Resistance value: 2 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Carbon Film (exact match required)
• Temperature coefficient: 0 / -400ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• Features: Flame Retardant Coating, Safety (exact match required)
• Compliance: ROHS3 Compliant, REACH Unaffected (exact match required)

The substitute parts CF14JT2K00 and CFM14JT2K00 meet all electrical specifications. Package configuration (axial vs. radial bend) and physical dimensions may vary while maintaining functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PCF14JT2K00, CF14JT2K00, and CFM14JT2K00—are electrically and functionally equivalent for applications requiring a 2 kOhms ±5% 0.25W carbon film resistor with flame retardant coating and safety features. All parts maintain Active product status and full compliance with ROHS3 and REACH requirements.

Selection between these parts should be based on:

• Package configuration requirements: PCF14JT2K00 and CF14JT2K00 support both axial and axial configurations with identical physical dimensions (2.30mm x 6.00mm). CFM14JT2K00 is a compact axial variant with reduced dimensions (1.70mm x 3.30mm).
• Board layout constraints: CFM14JT2K00 is suitable for space-constrained applications requiring smaller component footprint.
• Inventory availability: CF14JT2K00 (9369 pcs) and CFM14JT2K00 (22962 pcs) offer higher stock levels compared to PCF14JT2K00 (2077 pcs).

Frequently Asked Questions (FAQ)

Q: Can CF14JT2K00 be used as a direct replacement for PCF14JT2K00?

A: Yes. CF14JT2K00 is electrically and mechanically equivalent to PCF14JT2K00. Both parts share identical electrical specifications (2 kOhms ±5%, 0.25W, carbon film composition, temperature coefficient, and operating range) and physical dimensions (0.091" Dia x 0.236" L). The primary difference is package designation; CF14JT2K00 is specified as axial configuration only.

Q: What are the dimensional differences between CFM14JT2K00 and the other substitutes?

A: CFM14JT2K00 is a compact variant with reduced physical dimensions of 0.067" Dia x 0.130" L (1.70mm x 3.30mm), compared to 0.091" Dia x 0.236" L (2.30mm x 6.00mm) for PCF14JT2K00 and CF14JT2K00. All three parts are electrically identical and suitable for the same circuit applications. CFM14JT2K00 is recommended for applications with space constraints or high-density board layouts.

Q: Are all substitute parts ROHS3 and REACH compliant?

A: Yes. PCF14JT2K00, CF14JT2K00, and CFM14JT2K00 are all ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and use.

Q: Which substitute part should be selected for new designs?

A: For new designs, CFM14JT2K00 is recommended due to its compact form factor, higher inventory availability (22962 pcs), and full electrical and compliance equivalence. This part provides design flexibility for space-constrained applications while maintaining all required performance characteristics.