PCF14JT220R Equivalent & Substitute Parts

Part Overview

The PCF14JT220R is a 220 Ohms ±5% 0.25W through-hole resistor manufactured by Stackpole Electronics Inc in the CF series. This carbon film resistor features flame retardant coating and safety characteristics, designed for axial or radial bend configurations in Tape & Reel packaging. The part maintains Active product status and is ROHS3 compliant. Substitute parts are identified to address packaging format availability, inventory requirements, or specific application constraints while maintaining electrical and mechanical compatibility.

Substiute Parts

PCF14JT220R

Stackpole Electronics IncIn Stock: 1284PCF14JT220R Datasheet

Current PartRFQ

CF14JT220R

Stackpole Electronics IncIn Stock: 242796CF14JT220R Datasheet

DirectRFQ

CFM14JT220R

Stackpole Electronics IncIn Stock: 110398CFM14JT220R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PCF14JT220R are qualified based on the following electrical and mechanical parameters:

Electrical equivalence is established through matching resistance value (220 Ohms), tolerance (±5%), power rating (0.25W), composition (carbon film), temperature coefficient (0 / -400ppm/°C), and operating temperature range (-55°C ~ 155°C). All substitute parts maintain identical electrical specifications and compliance certifications (ROHS3, REACH Unaffected).

Mechanical compatibility is determined by package type (axial configuration), number of terminations (2), and physical dimensions within acceptable ranges for through-hole applications. The primary distinction among substitutes is packaging format: the main part is supplied in Tape & Reel (TR) format, while direct substitutes are available in Cut Tape (CT) format. Secondary variations include dimensional differences in the CFM14JT220R, which features a smaller form factor (0.067" Dia x 0.130" L versus 0.091" Dia x 0.236" L).

All substitute parts are manufactured by Stackpole Electronics Inc and maintain Active product status.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PCF14JT220R, CF14JT220R, and CFM14JT220R—are Active products manufactured by Stackpole Electronics Inc and maintain identical ROHS3 and REACH compliance certifications. Selection between these parts is determined by packaging and dimensional requirements rather than electrical performance.

The PCF14JT220R in Tape & Reel format is suitable for high-volume automated assembly processes. The CF14JT220R in Cut Tape format provides identical electrical and dimensional specifications with alternative packaging for lower-volume or manual assembly applications. The CFM14JT220R, also in Cut Tape format, offers a compact form factor (0.067" Dia x 0.130" L) while maintaining all electrical specifications, making it suitable for space-constrained PCB layouts where the smaller axial package is compatible with board design constraints.

Frequently Asked Questions (FAQ)

Q: Can CF14JT220R replace PCF14JT220R in my application?

A: Yes. Both parts are electrically identical 220 Ohms ±5% 0.25W carbon film resistors with matching temperature coefficients and operating ranges. The primary difference is packaging format: PCF14JT220R is supplied in Tape & Reel, while CF14JT220R is supplied in Cut Tape. Both use identical axial package dimensions (0.091" Dia x 0.236" L). Selection depends on your assembly process requirements.

Q: What are the dimensional differences between CF14JT220R and CFM14JT220R?

A: The CF14JT220R measures 0.091" Dia x 0.236" L (2.30mm x 6.00mm), while the CFM14JT220R measures 0.067" Dia x 0.130" L (1.70mm x 3.30mm). The CFM14JT220R is a compact variant. Both maintain identical electrical specifications. Verify PCB layout compatibility before substitution, as the smaller form factor may affect lead spacing and mounting hole positioning.

Q: Are all three parts ROHS3 compliant?

A: Yes. PCF14JT220R, CF14JT220R, and CFM14JT220R are all ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Which part should I select for high-volume production?

A: PCF14JT220R in Tape & Reel packaging is optimized for high-volume automated assembly. CF14JT220R and CFM14JT220R in Cut Tape format are suitable for lower-volume or manual assembly processes.

Q: Can I use CFM14JT220R as a direct replacement for PCF14JT220R?

A: Electrically, yes. However, the CFM14JT220R has a smaller physical form factor (0.067" Dia x 0.130" L versus 0.091" Dia x 0.236" L). Verify that your PCB layout, lead spacing, and mounting hole positions accommodate the compact dimensions before substitution.