PCF14JT15M0 Equivalent & Substitute Parts

Part Overview

The PCF14JT15M0 is a 15 MOhms ±5% 0.25W (1/4W) through-hole resistor manufactured by Stackpole Electronics Inc. This carbon film resistor features flame retardant coating and safety characteristics, designed for axial or radial bend configurations. The part is currently active in production with full RoHS3 compliance. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same resistance value, tolerance, power rating, and package type.

Substiute Parts

PCF14JT15M0

Stackpole Electronics IncIn Stock: 1058PCF14JT15M0 Datasheet

Current PartRFQ

CF14JT15M0

Stackpole Electronics IncIn Stock: 802CF14JT15M0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PCF14JT15M0 is determined by strict equivalence across the following parameters:

• Resistance value: 15 MOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Carbon Film (exact match required)
• Package configuration: Axial or Radial Bend (mechanical compatibility)
• Temperature coefficient: 0 / -1500ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• Physical dimensions: 0.091" Dia x 0.236" L (exact match required)
• Compliance: RoHS3 Compliant (exact match required)

The CF14JT15M0 qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility. The primary distinction is package configuration: CF14JT15M0 is specified as axial-only, while PCF14JT15M0 supports both axial and radial bend configurations.

Parameter Comparison

Engineering Selection Recommendations

Both PCF14JT15M0 and CF14JT15M0 are active production parts with identical electrical characteristics and full RoHS3 compliance. Selection between these parts depends on mechanical package requirements:

• PCF14JT15M0 supports both axial and radial bend configurations, providing flexibility for applications requiring either lead orientation.
• CF14JT15M0 is specified for axial configuration only.

For applications requiring radial bend lead geometry, PCF14JT15M0 is the appropriate selection. For applications accepting axial-only configuration, CF14JT15M0 is functionally equivalent. Both parts maintain identical electrical performance, temperature stability, and regulatory compliance across the specified operating range.

Frequently Asked Questions (FAQ)

Q: Can CF14JT15M0 replace PCF14JT15M0 in all applications?

A: CF14JT15M0 is electrically equivalent to PCF14JT15M0. However, CF14JT15M0 is specified for axial package configuration only. If your application requires radial bend lead geometry, PCF14JT15M0 must be used. If your PCB layout accepts axial leads, CF14JT15M0 is a valid substitute.

Q: What is the difference between axial and radial bend package configurations?

A: Axial configuration has leads extending from opposite ends of the resistor body. Radial bend configuration allows the leads to be bent to a radial orientation. PCF14JT15M0 supports both configurations, while CF14JT15M0 is axial-only.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both PCF14JT15M0 and CF14JT15M0 share identical physical dimensions of 0.091" Dia x 0.236" L (2.30mm x 6.00mm).

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are RoHS3 compliant and REACH unaffected, meeting identical regulatory requirements.

Q: What is the temperature coefficient specification, and does it affect substitution?

A: Both parts specify 0 / -1500ppm/°C temperature coefficient. This parameter is identical across both parts and does not affect substitution eligibility.

Q: Are there inventory considerations when selecting between these parts?

A: PCF14JT15M0 has 1014 pieces in stock. CF14JT15M0 has 761 pieces in stock. Availability may influence selection if immediate delivery is required.