PCF14JT150R Equivalent & Substitute Parts

Part Overview

The PCF14JT150R is a 150 Ohms ±5% 0.25W through-hole resistor manufactured by Stackpole Electronics Inc in the CF series. This carbon film resistor features flame retardant coating and safety characteristics, designed for general-purpose applications requiring reliable performance across industrial temperature ranges. The part is currently active in production with ROHS3 compliance and REACH unaffected status. Equivalent and substitute parts are identified to provide procurement flexibility, alternative packaging options, and inventory availability across different distribution channels.

Substiute Parts

PCF14JT150R

Stackpole Electronics IncIn Stock: 1036PCF14JT150R Datasheet

Current PartRFQ

CF14JT150R

Stackpole Electronics IncIn Stock: 9760CF14JT150R Datasheet

DirectRFQ

CFM14JT150R

Stackpole Electronics IncIn Stock: 21586CFM14JT150R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PCF14JT150R is determined by the following electrical and mechanical parameters:

• Resistance value: 150 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Carbon Film (exact match required)
• Temperature coefficient: 0 / -400ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• Compliance: ROHS3 Compliant, REACH Unaffected (exact match required)

Substitute parts identified are CF14JT150R and CFM14JT150R, both manufactured by Stackpole Electronics Inc. These parts maintain identical electrical specifications and compliance certifications. Differences exist only in packaging format (Tape & Reel versus Cut Tape) and physical dimensions, which do not affect electrical performance or functional compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—PCF14JT150R, CF14JT150R, and CFM14JT150R—are active production components from Stackpole Electronics Inc with identical electrical specifications and full compliance certifications. Selection between these parts should be based on packaging and inventory requirements:

PCF14JT150R is supplied in Tape & Reel format and supports both axial and radial bend configurations, suitable for automated assembly processes requiring reel-based component feeding.

CF14JT150R is supplied in Cut Tape format with standard axial configuration, appropriate for manual assembly or lower-volume production runs.

CFM14JT150R is supplied in Cut Tape format with reduced physical dimensions (1.70mm x 3.30mm versus 2.30mm x 6.00mm), suitable for space-constrained applications where component size is a design consideration.

All parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility across global markets.

Frequently Asked Questions (FAQ)

Q: Can CF14JT150R be used as a direct replacement for PCF14JT150R?

A: Yes. Both parts have identical electrical specifications: 150 Ohms ±5%, 0.25W power rating, carbon film composition, and operating temperature range of -55°C to 155°C. The primary difference is packaging format (Cut Tape versus Tape & Reel). Electrical performance and functional compatibility are equivalent.

Q: What is the difference between PCF14JT150R and CFM14JT150R?

A: Electrical specifications are identical. The CFM14JT150R has smaller physical dimensions (1.70mm x 3.30mm versus 2.30mm x 6.00mm) and is supplied in Cut Tape format rather than Tape & Reel. The CFM series is suitable for applications where component size must be minimized.

Q: Are all three parts ROHS3 compliant?

A: Yes. PCF14JT150R, CF14JT150R, and CFM14JT150R are all ROHS3 compliant and REACH unaffected, meeting regulatory requirements for restricted substances in electrical and electronic equipment.

Q: Which part should be selected for automated assembly?

A: PCF14JT150R is supplied in Tape & Reel format, which is optimized for automated pick-and-place assembly equipment. CF14JT150R and CFM14JT150R are supplied in Cut Tape format, suitable for manual assembly or lower-volume production.

Q: Do packaging differences affect circuit performance?

A: No. Packaging format (Tape & Reel or Cut Tape) and physical dimensions do not affect electrical performance. All three parts deliver identical resistance, tolerance, power rating, and temperature characteristics in circuit applications.