PCF14JT10K0 Equivalent & Substitute Parts

Part Overview

The PCF14JT10K0 is a 10 kOhms ±5% 0.25W carbon film through-hole resistor manufactured by Stackpole Electronics Inc. This component is classified as Active product status and is designed for general-purpose resistive applications requiring flame retardant coating and safety features. The part is supplied in Tape & Reel (TR) packaging with axial and radial bend configuration options. Equivalent and substitute parts are identified to provide procurement flexibility while maintaining electrical and mechanical compatibility within specified parameters.

Substiute Parts

PCF14JT10K0

Stackpole Electronics IncIn Stock: 816PCF14JT10K0 Datasheet

Current PartRFQ

CF14JT10K0

Stackpole Electronics IncIn Stock: 324410CF14JT10K0 Datasheet

DirectRFQ

CFM14JT10K0

Stackpole Electronics IncIn Stock: 33486CFM14JT10K0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PCF14JT10K0 are qualified based on the following electrical and mechanical parameters:

• Resistance value: 10 kOhms
• Tolerance: ±5%
• Power rating: 0.25W (1/4W)
• Composition: Carbon Film
• Temperature coefficient: 0 / -500ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Features: Flame Retardant Coating, Safety
• Compliance: ROHS3 Compliant, REACH Unaffected
• Package type: Axial configuration
• Manufacturer: Stackpole Electronics Inc
• Series: CF or CFM

Substitutes are grouped into two categories: direct equivalents (identical electrical and mechanical specifications with packaging variation) and manufacturer-recommended alternatives (same electrical specifications with dimensional variation).

Parameter Comparison

Engineering Selection Recommendations

CF14JT10K0 is a direct electrical and mechanical equivalent to PCF14JT10K0, with identical resistance, tolerance, power rating, temperature characteristics, and physical dimensions. The primary difference is packaging format: CF14JT10K0 is supplied in Cut Tape (CT) format versus Tape & Reel (TR) for the main part. Both maintain ROHS3 compliance and REACH Unaffected status. Selection between these two depends on procurement and assembly requirements.

CFM14JT10K0 is a manufacturer-recommended alternative from the CFM series. It maintains identical electrical specifications (10 kOhms ±5%, 0.25W, carbon film composition, temperature coefficient, and operating range) and compliance certifications. The CFM14JT10K0 features a smaller physical dimension (0.067" Dia x 0.130" L versus 0.091" Dia x 0.236" L), making it suitable for space-constrained applications. This part is also supplied in Cut Tape (CT) format. Selection of CFM14JT10K0 requires verification that the reduced physical footprint is compatible with the target application's mechanical layout and assembly process.

Frequently Asked Questions (FAQ)

Q: Can CF14JT10K0 be used as a direct replacement for PCF14JT10K0?

A: Yes. CF14JT10K0 is electrically and mechanically equivalent to PCF14JT10K0. Both parts share identical resistance (10 kOhms), tolerance (±5%), power rating (0.25W), composition (carbon film), temperature characteristics, and physical dimensions. The difference is packaging format: CF14JT10K0 is supplied in Cut Tape (CT) while PCF14JT10K0 is supplied in Tape & Reel (TR).

Q: What are the key differences between CF14JT10K0 and CFM14JT10K0?

A: Both parts are electrically identical with 10 kOhms resistance, ±5% tolerance, 0.25W power rating, and identical temperature coefficients and operating ranges. The primary difference is physical size: CFM14JT10K0 is smaller (0.067" Dia x 0.130" L) compared to CF14JT10K0 (0.091" Dia x 0.236" L). Both are ROHS3 compliant and REACH Unaffected. Selection depends on available board space and assembly compatibility.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. PCF14JT10K0, CF14JT10K0, and CFM14JT10K0 are all ROHS3 compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: Can CFM14JT10K0 be used in applications designed for PCF14JT10K0?

A: CFM14JT10K0 is electrically compatible with PCF14JT10K0. However, the reduced physical dimensions must be verified for mechanical compatibility with the target application's circuit board layout, component spacing, and assembly process before implementation.

Q: What packaging formats are available for these parts?

A: PCF14JT10K0 is supplied in Tape & Reel (TR) format. CF14JT10K0 and CFM14JT10K0 are supplied in Cut Tape (CT) format. Selection depends on procurement volume, assembly equipment, and inventory management requirements.