PCF14JB10K0 Equivalent & Substitute Parts

Part Overview

The PCF14JB10K0 is a 10 kOhms ±5% 0.25W (1/4W) through-hole resistor with axial leads, manufactured by Stackpole Electronics Inc. This carbon film resistor features flame retardant coating and safety characteristics, designed for general-purpose electronic applications requiring reliable fixed resistance values in through-hole configurations. The part maintains Active product status with 779 units in current inventory. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to supply constraints, design standardization, or inventory optimization.

Substiute Parts

PCF14JB10K0

Stackpole Electronics IncIn Stock: 801PCF14JB10K0 Datasheet

Current PartRFQ

CF14JB10K0

Stackpole Electronics IncIn Stock: 725CF14JB10K0 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PCF14JB10K0 are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution criteria are:

• Resistance Value: Exact match at 10 kOhms
• Tolerance: Exact match at ±5%
• Power Rating: Exact match at 0.25W (1/4W)
• Composition: Carbon Film construction
• Package Configuration: Axial through-hole leads
• Temperature Coefficient: 0 / -500ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Physical Dimensions: 0.091" Dia x 0.236" L (2.30mm x 6.00mm)
• Termination Count: 2 leads

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Manufacturer differences within the same series or between series do not affect functional interchangeability when all electrical and mechanical specifications are identical.

Parameter Comparison

Engineering Selection Recommendations

Both PCF14JB10K0 and CF14JB10K0 are Active products manufactured by Stackpole Electronics Inc with identical electrical specifications and mechanical configurations. Selection between these parts is based on availability and compliance requirements:

PCF14JB10K0: Primary selection with higher current inventory (779 units). Suitable for applications requiring immediate availability and standard through-hole resistor applications.

CF14JB10K0: Alternative selection with adequate inventory (662 units). Meets identical performance requirements. The CF14JB10K0 carries ROHS3 Compliant and REACH Unaffected certifications, providing additional regulatory documentation for applications with specific compliance mandates.

Both parts share identical ECCN (EAR99) and HTSUS (8533.10.0065) classifications. Selection should prioritize inventory availability unless specific regulatory compliance documentation is required for the end application.

Frequently Asked Questions (FAQ)

Q: Can CF14JB10K0 be used as a direct replacement for PCF14JB10K0?

A: Yes. Both parts are parametric equivalents with identical resistance (10 kOhms), tolerance (±5%), power rating (0.25W), composition (carbon film), package type (axial), temperature coefficient (0 / -500ppm/°C), operating temperature range (-55°C ~ 155°C), and physical dimensions (0.091" Dia x 0.236" L). They are functionally interchangeable in all circuit applications.

Q: What are the key parameters that determine substitutability?

A: Substitutability is determined by exact equivalence in: resistance value, tolerance, power rating, composition type, package configuration, temperature coefficient, operating temperature range, and physical dimensions. All these parameters must match precisely for parts to be classified as direct substitutes.

Q: Are there any differences in compliance certifications between these parts?

A: CF14JB10K0 includes ROHS3 Compliant and REACH Unaffected certifications. PCF14JB10K0 specifications do not list these certifications. Both parts share identical ECCN and HTSUS classifications. Applications requiring specific regulatory compliance documentation should reference the CF14JB10K0.

Q: Do these parts have identical physical dimensions for PCB mounting?

A: Yes. Both PCF14JB10K0 and CF14JB10K0 have identical dimensions of 0.091" Dia x 0.236" L (2.30mm x 6.00mm) with 2 axial terminations. They are mechanically interchangeable for through-hole PCB applications.

Q: What is the temperature operating range for these resistors?

A: Both parts operate across -55°C to 155°C with a temperature coefficient of 0 / -500ppm/°C, suitable for industrial and commercial temperature environments.