PCF0G471MCL1GS Equivalent & Substitute Parts

Part Overview

The PCF0G471MCL1GS is a 470 µF, 4 V aluminum polymer capacitor manufactured by Nichicon in the PCF series. This surface mount component is designed for general purpose applications with a rated lifetime of 2000 hours at 105°C and an operating temperature range of -55°C to 105°C. The part is currently active and in stock with 1036 units available. Equivalent and substitute parts are identified when design requirements allow for variations in voltage rating, ESR characteristics, or physical dimensions while maintaining the core capacitance and tolerance specifications.

Substiute Parts

PCF0G471MCL1GS

NichiconIn Stock: 1122PCF0G471MCL1GS Datasheet

Current PartRFQ

PCF0J471MCL6GS

NichiconIn Stock: 1007PCF0J471MCL6GS Datasheet

UpgradeRFQ

PCK0G471MCO1GS

NichiconIn Stock: 2093PCK0G471MCO1GS Datasheet

SimilarRFQ

RPS0G471MCN1GS

NichiconIn Stock: 1406RPS0G471MCN1GS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PCF0G471MCL1GS is determined by the following criteria:

Primary Substitution Criteria (Must Match):

• Capacitance: 470 µF
• Tolerance: ±20%
• Type: Aluminum Polymer
• Mounting Type: Surface Mount
• Operating Temperature Range: -55°C to 105°C
• Lifetime: 2000 Hrs @ 105°C

Secondary Variation Parameters (Allowed to Differ):

• Voltage Rating: May be equal or higher than 4 V
• ESR: May vary within acceptable limits for the application
• Physical Dimensions: May differ if land pattern compatibility is maintained
• Series Designation: May differ across Nichicon product lines

The substitute parts identified below meet the primary criteria while allowing for variations in voltage rating and ESR characteristics. These variations are acceptable because higher voltage ratings provide backward compatibility, and ESR differences reflect different internal construction while maintaining the same functional capacitance and thermal performance.

Parameter Comparison

Engineering Selection Recommendations

PCF0J471MCL6GS (Upgrade Substitute): This part is suitable as a direct upgrade when circuit design allows for higher voltage tolerance. The 6.3 V rating provides additional voltage margin over the 4 V specification while maintaining identical physical dimensions and land pattern compatibility. Both parts are ROHS3 compliant and active products. The ESR difference of 1 mOhm is negligible for general purpose applications.

PCK0G471MCO1GS (Similar Substitute): This part offers lower ESR (9 mOhm versus 17 mOhm) and higher ripple current capability (4.5 A versus 4.2 A at 100 kHz). However, the smaller physical dimensions (8.00 mm diameter versus 10.00 mm) and different land pattern (8.30 mm x 8.30 mm versus 10.30 mm x 10.30 mm) require PCB layout verification. Both parts are ROHS3 compliant and active products from Nichicon.

RPS0G471MCN1GS (Similar Substitute): This part maintains the same voltage rating and physical diameter as the main part but features higher ESR (22 mOhm versus 17 mOhm) and lower ripple current capability (3.8 A versus 4.2 A at 100 kHz). The REACH status differs (Unaffected versus Affected), which may be relevant for specific regulatory requirements. Both parts are active products.

All substitute parts maintain the core specifications of 470 µF capacitance, ±20% tolerance, 2000 hour lifetime at 105°C, and -55°C to 105°C operating temperature range required for functional equivalence.

Frequently Asked Questions (FAQ)

Q: Can PCF0J471MCL6GS replace PCF0G471MCL1GS in a 4 V circuit? A: Yes. The PCF0J471MCL6GS has a 6.3 V rating, which exceeds the 4 V requirement. Higher voltage-rated capacitors are backward compatible with lower voltage applications. Physical dimensions and land patterns are identical, ensuring direct PCB compatibility.

Q: What is the primary difference between PCK0G471MCO1GS and the main part? A: The PCK0G471MCO1GS has lower ESR (9 mOhm versus 17 mOhm) and smaller physical dimensions (8.00 mm diameter versus 10.00 mm). The reduced ESR provides better high-frequency ripple current performance. However, the different land pattern size requires PCB layout modification.

Q: Is RPS0G471MCN1GS suitable for high-ripple-current applications? A: No. The RPS0G471MCN1GS has higher ESR (22 mOhm) and lower ripple current rating (3.8 A at 100 kHz) compared to the main part (4.2 A). It is suitable for general purpose applications with moderate ripple current requirements.

Q: Are all substitute parts RoHS compliant? A: Yes. All parts listed are ROHS3 compliant. The RPS0G471MCN1GS has REACH Unaffected status, while the main part and other substitutes have REACH Affected status. Verify REACH compliance requirements for your specific application.

Q: Can I use PCK0G471MCO1GS without modifying the PCB? A: No. The PCK0G471MCO1GS has different land pattern dimensions (8.30 mm x 8.30 mm versus 10.30 mm x 10.30 mm) and physical size. PCB layout modification is required for this substitution.

Q: What inventory levels are available for each part? A: PCF0G471MCL1GS: 1036 units; PCF0J471MCL6GS: 942 units; PCK0G471MCO1GS: 2011 units; RPS0G471MCN1GS: 1385 units.