PCF0E152MCL9GS Equivalent & Substitute Parts

Part Overview

The PCF0E152MCL9GS is a 1500 µF, 2.5 V aluminum polymer capacitor manufactured by Nichicon in the PCF series. This surface mount radial can capacitor is designed for general purpose applications requiring stable capacitance and low equivalent series resistance. The part is active in production status and ROHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, design flexibility, or application-specific voltage margin requirements.

Substiute Parts

PCF0E152MCL9GS

NichiconIn Stock: 1642PCF0E152MCL9GS Datasheet

Current PartRFQ

PCG1A152MCL1GS

NichiconIn Stock: 14366PCG1A152MCL1GS Datasheet

UpgradeRFQ

PCJ0J152MCL1GS

NichiconIn Stock: 28273PCJ0J152MCL1GS Datasheet

UpgradeRFQ

2R5SVP1500M

Panasonic Electronic ComponentsIn Stock: 9962R5SVP1500M Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PCF0E152MCL9GS is determined by the following criteria:

Electrical Parameters (Must Match or Exceed):

• Capacitance: 1500 µF (±20% tolerance)
• Voltage Rating: Equal to or greater than 2.5 V
• ESR: 12 mOhm or lower
• Lifetime: 2000 Hrs @ 105°C or greater
• Operating Temperature Range: -55°C to 105°C minimum

Mechanical Parameters (Must Match):

• Package Type: Radial, Can - SMD
• Size / Dimension: 0.394" Dia (10.00 mm)
• Surface Mount Land Size: 0.406" L x 0.406" W (10.30 mm x 10.30 mm)
• Mounting Type: Surface Mount

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Type: Aluminum Polymer

The substitute parts are categorized as follows:

• Upgrade Substitutes (Higher Voltage Rating): PCG1A152MCL1GS (10 V), PCJ0J152MCL1GS (6.3 V) — These parts maintain identical capacitance and mechanical compatibility while providing increased voltage margin for applications requiring higher transient protection or design flexibility.

• Parametric Equivalent (Same Voltage Rating, Different Manufacturer): 2R5SVP1500M (Panasonic) — This part matches the electrical and mechanical specifications of the main part while offering an alternative manufacturer source.

Parameter Comparison

Engineering Selection Recommendations

PCG1A152MCL1GS (Nichicon, 10 V): This upgrade substitute provides a 4× voltage margin over the main part while maintaining identical capacitance, ESR, and mechanical footprint. Selection is appropriate for applications requiring enhanced transient voltage protection or where design flexibility for future voltage specification changes is beneficial. All compliance certifications remain equivalent.

PCJ0J152MCL1GS (Nichicon, 6.3 V): This upgrade substitute provides a 2.5× voltage margin and maintains identical ESR and capacitance. The seated height is reduced to 0.394" (10.00 mm) compared to the main part's 0.500" (12.70 mm), which may provide space savings in height-constrained designs. All compliance certifications remain equivalent.

2R5SVP1500M (Panasonic, 2.5 V): This parametric equivalent from Panasonic matches the electrical specifications and mechanical dimensions of the main part exactly. Selection is appropriate when Panasonic sourcing is preferred or when Nichicon inventory is unavailable. RoHS3 compliance is maintained; REACH status differs (Unaffected vs. Affected).

All substitute parts maintain active production status and are suitable for direct replacement in general purpose applications where the specified electrical and mechanical parameters are met.

Frequently Asked Questions (FAQ)

Q: Can PCG1A152MCL1GS be used as a direct replacement for PCF0E152MCL9GS?

A: Yes. PCG1A152MCL1GS is mechanically and electrically compatible. The 10 V rating exceeds the 2.5 V requirement, providing additional voltage margin. Capacitance, ESR, temperature range, and package dimensions are identical. No circuit modifications are required.

Q: What is the difference between the upgrade substitutes and the parametric equivalent?

A: Upgrade substitutes (PCG1A152MCL1GS and PCJ0J152MCL1GS) offer higher voltage ratings while maintaining all other specifications. The parametric equivalent (2R5SVP1500M) matches the voltage rating of the main part but is from a different manufacturer (Panasonic instead of Nichicon).

Q: Does PCJ0J152MCL1GS fit in the same PCB footprint?

A: Yes. The surface mount land size and diameter are identical (0.406" L x 0.406" W, 0.394" Dia). The seated height is reduced to 0.394" (10.00 mm) compared to 0.500" (12.70 mm), which may provide additional clearance in height-constrained designs but does not affect footprint compatibility.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. PCF0E152MCL9GS, PCG1A152MCL1GS, PCJ0J152MCL1GS, and 2R5SVP1500M are all ROHS3 compliant.

Q: What is the difference in ripple current handling between the main part and substitutes?

A: PCF0E152MCL9GS and 2R5SVP1500M both handle 5.44 A @ 100 kHz. PCJ0J152MCL1GS handles 5.025 A @ 100 kHz. PCG1A152MCL1GS handles 4.9 A @ 100 kHz. All values are within acceptable range for general purpose applications with identical capacitance and voltage specifications.

Q: Can 2R5SVP1500M be used if Nichicon parts are unavailable?

A: Yes. 2R5SVP1500M is a parametric equivalent with identical electrical and mechanical specifications. It is suitable for direct replacement when Panasonic sourcing is preferred or when Nichicon inventory is constrained.