PCF0E152MCL1GS Equivalent & Substitute Parts

Part Overview

The PCF0E152MCL1GS is a 1500 µF, 2.5 V aluminum polymer capacitor manufactured by Nichicon in the PCF series. This surface mount radial can capacitor is designed for general purpose applications requiring stable capacitance and low equivalent series resistance. The part is active in production status with ROHS3 compliance and REACH compliance certification.

Equivalent and substitute parts are identified when design requirements allow for voltage rating upgrades, ESR improvements, or ripple current enhancements while maintaining the same capacitance value, physical footprint compatibility, and operating temperature range.

Substiute Parts

PCF0E152MCL1GS

NichiconIn Stock: 845PCF0E152MCL1GS Datasheet

Current PartRFQ

PCJ0J152MCL1GS

NichiconIn Stock: 28273PCJ0J152MCL1GS Datasheet

UpgradeRFQ

PCF0E152MCL9GS

NichiconIn Stock: 1642PCF0E152MCL9GS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the PCF0E152MCL1GS is based on the following allowed parameters:

Capacitance: Must remain 1500 µF. No tolerance deviation is permitted.

Voltage Rating: Substitute parts may have equal or higher voltage ratings. A higher voltage rating provides design margin and does not compromise circuit functionality when the operating voltage remains at or below the original specification.

ESR (Equivalent Series Resistance): Substitute parts with equal or lower ESR values are acceptable. Lower ESR improves ripple current handling and thermal performance.

Ripple Current @ 100 kHz: Substitute parts with equal or higher ripple current ratings are acceptable. This parameter scales with ESR and voltage rating improvements.

Physical Footprint: Substitute parts must maintain identical or compatible surface mount land size (0.406" L x 0.406" W / 10.30 mm x 10.30 mm) and mounting type (Surface Mount).

Operating Temperature Range: Must maintain -55°C to 105°C minimum specification.

Lifetime @ Temperature: Must maintain 2000 Hrs @ 105°C minimum specification.

Compliance: All substitute parts must maintain ROHS3 and REACH compliance status.

Parameter Comparison

Engineering Selection Recommendations

PCJ0J152MCL1GS (Upgrade Substitute): This part qualifies as a direct upgrade substitute. It maintains identical capacitance (1500 µF), identical physical footprint, and identical compliance certifications. The voltage rating increases from 2.5 V to 6.3 V, providing enhanced design margin. ESR improves from 13 mOhm to 12 mOhm, and ripple current capability increases from 4.7 A to 5.025 A at 100 kHz. All electrical and thermal specifications remain compatible with the original design. This part is suitable for applications where voltage margin or improved ripple current handling is beneficial.

PCF0E152MCL9GS (Similar Substitute): This part maintains identical capacitance (1500 µF), identical voltage rating (2.5 V), and identical compliance certifications. ESR improves from 13 mOhm to 12 mOhm, and ripple current capability increases from 4.7 A to 5.44 A at 100 kHz. The seated height increases from 0.394" (10.00 mm) to 0.500" (12.70 mm). This height difference must be evaluated against available PCB clearance and mechanical constraints. Surface mount land size remains compatible. This part is suitable for applications where improved ripple current handling is required and the increased height does not present mechanical conflicts.

All substitute parts maintain active production status and full compliance with ROHS3 and REACH regulations.

Frequently Asked Questions (FAQ)

Q: Can PCJ0J152MCL1GS replace PCF0E152MCL1GS in any application?

A: PCJ0J152MCL1GS qualifies as a direct substitute based on electrical and mechanical parameters. The higher voltage rating (6.3 V vs. 2.5 V) and improved ESR (12 mOhm vs. 13 mOhm) are compatible with the original design. The physical footprint and surface mount land size are identical. Substitution is valid when the circuit operating voltage does not exceed 2.5 V.

Q: What is the key difference between PCF0E152MCL9GS and the main part?

A: PCF0E152MCL9GS maintains the same voltage rating (2.5 V) and capacitance (1500 µF) as PCF0E152MCL1GS. The primary differences are improved ESR (12 mOhm vs. 13 mOhm), increased ripple current capability (5.44 A vs. 4.7 A at 100 kHz), and increased seated height (0.500" vs. 0.394"). The height increase must be evaluated for PCB clearance compatibility.

Q: Are all substitute parts available in the same packaging format?

A: All parts listed are supplied in Tape & Reel (TR) packaging for surface mount assembly. Surface mount land size is identical across all parts (0.406" L x 0.406" W / 10.30 mm x 10.30 mm), ensuring compatibility with existing PCB designs.

Q: Do substitute parts maintain the same operating temperature range?

A: All parts maintain the operating temperature range of -55°C to 105°C and the lifetime specification of 2000 Hrs @ 105°C. Thermal performance is equivalent across all listed parts.

Q: What compliance certifications apply to substitute parts?

A: All substitute parts maintain ROHS3 compliance and REACH compliance status, identical to the main part PCF0E152MCL1GS.